本篇内容主要讲解“PostgreSQL ExecAgg中调用的函数是什么”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“PostgreSQL ExecAgg中调用的函数是什么”吧!
AggState
聚合函数执行时状态结构体,内含AggStatePerAgg等结构体
/* ---------------------
* AggState information
*
* ss.ss_ScanTupleSlot refers to output of underlying plan.
* ss.ss_ScanTupleSlot指的是基础计划的输出.
* (ss = ScanState,ps = PlanState)
*
* Note: ss.ps.ps_ExprContext contains ecxt_aggvalues and
* ecxt_aggnulls arrays, which hold the computed agg values for the current
* input group during evaluation of an Agg node's output tuple(s). We
* create a second ExprContext, tmpcontext, in which to evaluate input
* expressions and run the aggregate transition functions.
* 注意:ss.ps.ps_ExprContext包含了ecxt_aggvalues和ecxt_aggnulls数组,
* 这两个数组保存了在计算agg节点的输出元组时当前输入组已计算的agg值.
* ---------------------
*/
/* these structs are private in nodeAgg.c: */
//在nodeAgg.c中私有的结构体
typedef struct AggStatePerAggData *AggStatePerAgg;
typedef struct AggStatePerTransData *AggStatePerTrans;
typedef struct AggStatePerGroupData *AggStatePerGroup;
typedef struct AggStatePerPhaseData *AggStatePerPhase;
typedef struct AggStatePerHashData *AggStatePerHash;
typedef struct AggState
{
//第一个字段是NodeTag(继承自ScanState)
ScanState ss; /* its first field is NodeTag */
//targetlist和quals中所有的Aggref
List *aggs; /* all Aggref nodes in targetlist & quals */
//链表的大小(可以为0)
int numaggs; /* length of list (could be zero!) */
//pertrans条目大小
int numtrans; /* number of pertrans items */
//Agg策略模式
AggStrategy aggstrategy; /* strategy mode */
//agg-splitting模式,参见nodes.h
AggSplit aggsplit; /* agg-splitting mode, see nodes.h */
//指向当前步骤数据的指针
AggStatePerPhase phase; /* pointer to current phase data */
//步骤数(包括0)
int numphases; /* number of phases (including phase 0) */
//当前步骤
int current_phase; /* current phase number */
//per-Aggref信息
AggStatePerAgg peragg; /* per-Aggref information */
//per-Trans状态信息
AggStatePerTrans pertrans; /* per-Trans state information */
//长生命周期数据的ExprContexts(hashtable)
ExprContext *hashcontext; /* econtexts for long-lived data (hashtable) */
////长生命周期数据的ExprContexts(每一个GS使用)
ExprContext **aggcontexts; /* econtexts for long-lived data (per GS) */
//输入表达式的ExprContext
ExprContext *tmpcontext; /* econtext for input expressions */
#define FIELDNO_AGGSTATE_CURAGGCONTEXT 14
//当前活跃的aggcontext
ExprContext *curaggcontext; /* currently active aggcontext */
//当前活跃的aggregate(如存在)
AggStatePerAgg curperagg; /* currently active aggregate, if any */
#define FIELDNO_AGGSTATE_CURPERTRANS 16
//当前活跃的trans state
AggStatePerTrans curpertrans; /* currently active trans state, if any */
//输入结束?
bool input_done; /* indicates end of input */
//Agg扫描结束?
bool agg_done; /* indicates completion of Agg scan */
//最后一个grouping set
int projected_set; /* The last projected grouping set */
#define FIELDNO_AGGSTATE_CURRENT_SET 20
//将要解析的当前grouping set
int current_set; /* The current grouping set being evaluated */
//当前投影操作的分组列
Bitmapset *grouped_cols; /* grouped cols in current projection */
//倒序的分组列链表
List *all_grouped_cols; /* list of all grouped cols in DESC order */
/* These fields are for grouping set phase data */
//-------- 下面的列用于grouping set步骤数据
//所有步骤中最大的sets大小
int maxsets; /* The max number of sets in any phase */
//所有步骤的数组
AggStatePerPhase phases; /* array of all phases */
//对于phases > 1,已排序的输入信息
Tuplesortstate *sort_in; /* sorted input to phases > 1 */
//对于下一个步骤,输入已拷贝
Tuplesortstate *sort_out; /* input is copied here for next phase */
//排序结果的slot
TupleTableSlot *sort_slot; /* slot for sort results */
/* these fields are used in AGG_PLAIN and AGG_SORTED modes: */
//------- 下面的列用于AGG_PLAIN和AGG_SORTED模式:
//per-group指针的grouping set编号数组
AggStatePerGroup *pergroups; /* grouping set indexed array of per-group
* pointers */
//当前组的第一个元组拷贝
HeapTuple grp_firstTuple; /* copy of first tuple of current group */
/* these fields are used in AGG_HASHED and AGG_MIXED modes: */
//--------- 下面的列用于AGG_HASHED和AGG_MIXED模式:
//是否已填充hash表?
bool table_filled; /* hash table filled yet? */
//hash桶数?
int num_hashes;
//相应的哈希表数据数组
AggStatePerHash perhash; /* array of per-hashtable data */
//per-group指针的grouping set编号数组
AggStatePerGroup *hash_pergroup; /* grouping set indexed array of
* per-group pointers */
/* support for evaluation of agg input expressions: */
//---------- agg输入表达式解析支持
#define FIELDNO_AGGSTATE_ALL_PERGROUPS 34
//首先是->pergroups,然后是hash_pergroup
AggStatePerGroup *all_pergroups; /* array of first ->pergroups, than
* ->hash_pergroup */
//投影实现机制
ProjectionInfo *combinedproj; /* projection machinery */
} AggState;
/* Primitive options supported by nodeAgg.c: */
//nodeag .c支持的基本选项
#define AGGSPLITOP_COMBINE 0x01 /* substitute combinefn for transfn */
#define AGGSPLITOP_SKIPFINAL 0x02 /* skip finalfn, return state as-is */
#define AGGSPLITOP_SERIALIZE 0x04 /* apply serializefn to output */
#define AGGSPLITOP_DESERIALIZE 0x08 /* apply deserializefn to input */
/* Supported operating modes (i.e., useful combinations of these options): */
//支持的操作模式
typedef enum AggSplit
{
/* Basic, non-split aggregation: */
//基本 : 非split聚合
AGGSPLIT_SIMPLE = 0,
/* Initial phase of partial aggregation, with serialization: */
//部分聚合的初始步骤,序列化
AGGSPLIT_INITIAL_SERIAL = AGGSPLITOP_SKIPFINAL | AGGSPLITOP_SERIALIZE,
/* Final phase of partial aggregation, with deserialization: */
//部分聚合的最终步骤,反序列化
AGGSPLIT_FINAL_DESERIAL = AGGSPLITOP_COMBINE | AGGSPLITOP_DESERIALIZE
} AggSplit;
/* Test whether an AggSplit value selects each primitive option: */
//测试AggSplit选择了哪些基本选项
#define DO_AGGSPLIT_COMBINE(as) (((as) & AGGSPLITOP_COMBINE) != 0)
#define DO_AGGSPLIT_SKIPFINAL(as) (((as) & AGGSPLITOP_SKIPFINAL) != 0)
#define DO_AGGSPLIT_SERIALIZE(as) (((as) & AGGSPLITOP_SERIALIZE) != 0)
#define DO_AGGSPLIT_DESERIALIZE(as) (((as) & AGGSPLITOP_DESERIALIZE) != 0)ExecAgg接收从outer子计划返回的元组合适的属性上为每一个聚合函数(出现在投影列或节点表达式)执行聚合.需要聚合的元组数量依赖于是否已分组或者选择普通聚合.在已分组的聚合操作宏,为每一个组产生结果行;普通聚合,整个查询只有一个结果行.
不管哪种情况,每一个聚合结果值都会存储在表达式上下文中(ExecProject会解析结果元组)
/*
* ExecAgg -
*
* ExecAgg receives tuples from its outer subplan and aggregates over
* the appropriate attribute for each aggregate function use (Aggref
* node) appearing in the targetlist or qual of the node. The number
* of tuples to aggregate over depends on whether grouped or plain
* aggregation is selected. In grouped aggregation, we produce a result
* row for each group; in plain aggregation there's a single result row
* for the whole query. In either case, the value of each aggregate is
* stored in the expression context to be used when ExecProject evaluates
* the result tuple.
* ExecAgg接收从outer子计划返回的元组合适的属性上为每一个聚合函数(出现在投影列或节点表达式)执行聚合.
* 需要聚合的元组数量依赖于是否已分组或者选择普通聚合.
* 在已分组的聚合操作宏,为每一个组产生结果行;普通聚合,整个查询只有一个结果行.
* 不管哪种情况,每一个聚合结果值都会存储在表达式上下文中(ExecProject会解析结果元组)
*/
static TupleTableSlot *
ExecAgg(PlanState *pstate)
{
AggState *node = castNode(AggState, pstate);
TupleTableSlot *result = NULL;
CHECK_FOR_INTERRUPTS();
if (!node->agg_done)
{
/* Dispatch based on strategy */
//基于策略进行分发
switch (node->phase->aggstrategy)
{
case AGG_HASHED:
if (!node->table_filled)
agg_fill_hash_table(node);
/* FALLTHROUGH */
//填充后,执行MIXED
case AGG_MIXED:
result = agg_retrieve_hash_table(node);
break;
case AGG_PLAIN:
case AGG_SORTED:
result = agg_retrieve_direct(node);
break;
}
if (!TupIsNull(result))
return result;
}
return NULL;
}agg_retrieve_hash_table
ExecAgg(Hash实现版本):在hash表中检索组
大体实现逻辑如下:
1.初始化相关变量,如上下文/peragg等
2.未完成,循环
2.1从perhash数据结构中获取slot
2.2调用ScanTupleHashTable获取条目
2.3如返回的条目为NULL,切换到下一个set,如已完成检索,则设置标记,退出
2.4如返回的条目不为NULL,则:
2.4.1重置内econtext上下文
2.4.2存储最小化元组
2.4.3重置firstSlot,存储该虚拟元组
2.4.4准备投影slot并执行最终的聚合运算,投影后如结果不为NULL,则返回此结果.
/*
* ExecAgg for hashed case: retrieving groups from hash table
* ExecAgg(Hash实现版本):在hash表中检索组
*/
static TupleTableSlot *
agg_retrieve_hash_table(AggState *aggstate)
{
ExprContext *econtext;
AggStatePerAgg peragg;
AggStatePerGroup pergroup;
TupleHashEntryData *entry;
TupleTableSlot *firstSlot;
TupleTableSlot *result;
AggStatePerHash perhash;
/*
* get state info from node.
* 从node节点中获取状态信息.
*
* econtext is the per-output-tuple expression context.
* econtext是per-output-tuple表达式上下文.
*/
econtext = aggstate->ss.ps.ps_ExprContext;
peragg = aggstate->peragg;
firstSlot = aggstate->ss.ss_ScanTupleSlot;
/*
* Note that perhash (and therefore anything accessed through it) can
* change inside the loop, as we change between grouping sets.
* 注意,在分组之间切换时,perhash在循环中可能会改变
*/
perhash = &aggstate->perhash[aggstate->current_set];
/*
* We loop retrieving groups until we find one satisfying
* aggstate->ss.ps.qual
* 循环检索groups,直至检索到一个符合aggstate->ss.ps.qual条件的组.
*/
while (!aggstate->agg_done)
{
//------------- 选好
//获取Slot
TupleTableSlot *hashslot = perhash->hashslot;
int i;
//检查中断
CHECK_FOR_INTERRUPTS();
/*
* Find the next entry in the hash table
* 检索hash表的下一个条目
*/
entry = ScanTupleHashTable(perhash->hashtable, &perhash->hashiter);
if (entry == NULL)
{
//条目为NULL,切换到下一个set
int nextset = aggstate->current_set + 1;
if (nextset < aggstate->num_hashes)
{
/*
* Switch to next grouping set, reinitialize, and restart the
* loop.
* 切换至下一个grouping set,重新初始化并重启循环
*/
select_current_set(aggstate, nextset, true);
perhash = &aggstate->perhash[aggstate->current_set];
ResetTupleHashIterator(perhash->hashtable, &perhash->hashiter);
continue;
}
else
{
/* No more hashtables, so done */
//已完成检索,设置标记,退出
aggstate->agg_done = true;
return NULL;
}
}
/*
* Clear the per-output-tuple context for each group
* 为每一个group清除per-output-tuple上下文
*
* We intentionally don't use ReScanExprContext here; if any aggs have
* registered shutdown callbacks, they mustn't be called yet, since we
* might not be done with that agg.
* 在这里不会用到ReScanExprContext,如果存在aggs注册了shutdown回调,
* 那应该还没有调用,因为我们可能还没有完成该agg的处理.
*/
ResetExprContext(econtext);
/*
* Transform representative tuple back into one with the right
* columns.
* 将典型元组转回具有正确列的元组.
*/
ExecStoreMinimalTuple(entry->firstTuple, hashslot, false);
slot_getallattrs(hashslot);
//清理元组
//重置firstSlot
ExecClearTuple(firstSlot);
memset(firstSlot->tts_isnull, true,
firstSlot->tts_tupleDescriptor->natts * sizeof(bool));
for (i = 0; i < perhash->numhashGrpCols; i++)
{
//重置firstSlot
int varNumber = perhash->hashGrpColIdxInput[i] - 1;
firstSlot->tts_values[varNumber] = hashslot->tts_values[i];
firstSlot->tts_isnull[varNumber] = hashslot->tts_isnull[i];
}
ExecStoreVirtualTuple(firstSlot);
pergroup = (AggStatePerGroup) entry->additional;
/*
* Use the representative input tuple for any references to
* non-aggregated input columns in the qual and tlist.
* 为qual和tlist中的非聚合输入列依赖使用典型输入元组
*/
econtext->ecxt_outertuple = firstSlot;
//准备投影slot
prepare_projection_slot(aggstate,
econtext->ecxt_outertuple,
aggstate->current_set);
//最终的聚合操作
finalize_aggregates(aggstate, peragg, pergroup);
//投影
result = project_aggregates(aggstate);
if (result)
return result;
}
/* No more groups */
//没有更多的groups了,返回NULL
return NULL;
}
#define ScanTupleHashTable(htable, iter) \
tuplehash_iterate(htable->hashtab, iter)
/* --------------------------------
* ExecStoreMinimalTuple
*
* Like ExecStoreTuple, but insert a "minimal" tuple into the slot.
* 与ExecStoreTuple类似,不同的是插入一个"最小化"的元组到slot中.
*
* No 'buffer' parameter since minimal tuples are never stored in relations.
* 不需要"buffer"参数,因为最小化元组不会存储到relations中.
* --------------------------------
*/
TupleTableSlot *
ExecStoreMinimalTuple(MinimalTuple mtup,
TupleTableSlot *slot,
bool shouldFree)
{
/*
* sanity checks
* 一致性校验
*/
Assert(mtup != NULL);
Assert(slot != NULL);
Assert(slot->tts_tupleDescriptor != NULL);
/*
* Free any old physical tuple belonging to the slot.
* 释放归属于该slot的旧物理元组
*/
if (slot->tts_shouldFree)
heap_freetuple(slot->tts_tuple);
if (slot->tts_shouldFreeMin)
heap_free_minimal_tuple(slot->tts_mintuple);
/*
* Drop the pin on the referenced buffer, if there is one.
* 清除已依赖buffer的pin标记
*/
if (BufferIsValid(slot->tts_buffer))
ReleaseBuffer(slot->tts_buffer);
slot->tts_buffer = InvalidBuffer;
/*
* Store the new tuple into the specified slot.
* 存储新tuple到指定的slot中
*/
slot->tts_isempty = false;
slot->tts_shouldFree = false;
slot->tts_shouldFreeMin = shouldFree;
slot->tts_tuple = &slot->tts_minhdr;
slot->tts_mintuple = mtup;
slot->tts_minhdr.t_len = mtup->t_len + MINIMAL_TUPLE_OFFSET;
slot->tts_minhdr.t_data = (HeapTupleHeader) ((char *) mtup - MINIMAL_TUPLE_OFFSET);
/* no need to set t_self or t_tableOid since we won't allow access */
//因为不允许访问,因此无需设置t_sefl或者t_tableOid
/* Mark extracted state invalid */
//标记已提取状态无效
slot->tts_nvalid = 0;
return slot;
}
/* --------------------------------
* ExecStoreVirtualTuple
* Mark a slot as containing a virtual tuple.
* 标记slot包含虚拟元组
*
* The protocol for loading a slot with virtual tuple data is:
* * Call ExecClearTuple to mark the slot empty.
* * Store data into the Datum/isnull arrays.
* * Call ExecStoreVirtualTuple to mark the slot valid.
* This is a bit unclean but it avoids one round of data copying.
* 使用虚拟元组数据的协议如下:
* * 调用ExecClearTuple标记slot为空
* * 存储数据到Datum/isnull数组中
* * 调用ExecStoreVirtualTuple标记slot有效
* --------------------------------
*/
TupleTableSlot *
ExecStoreVirtualTuple(TupleTableSlot *slot)
{
/*
* sanity checks
* 一致性检查
*/
Assert(slot != NULL);
Assert(slot->tts_tupleDescriptor != NULL);
Assert(slot->tts_isempty);
slot->tts_isempty = false;
slot->tts_nvalid = slot->tts_tupleDescriptor->natts;
return slot;
}测试脚本
-- 创建数据表,插入测试数据 drop table if exists t_agg_simple; create table t_agg_simple(bh varchar(20),c1 int,c2 int,c3 int,c4 int,c5 int,c6 int); insert into t_agg_simple select 'GZ01',col,col,col,col,col,col from generate_series(1,1) as col; insert into t_agg_simple select 'GZ02',col,col,col,col,col,col from generate_series(2,2) as col; insert into t_agg_simple select 'GZ03',col,col,col,col,col,col from generate_series(3,3) as col; insert into t_agg_simple select 'GZ04',col,col,col,col,col,col from generate_series(4,4) as col; insert into t_agg_simple select 'GZ05',col,col,col,col,col,col from generate_series(5,5) as col; -- 禁用并行 set max_parallel_workers_per_gather=0; select bh,avg(c1),min(c1),max(c2) from t_agg_simple group by bh;
跟踪分析
Breakpoint 1, agg_retrieve_hash_table (aggstate=0x2929640) at nodeAgg.c:1969 1969 econtext = aggstate->ss.ps.ps_ExprContext; (gdb)
输入参数
(gdb) p *aggstate
$1 = {ss = {ps = {type = T_AggState, plan = 0x2849a30, state = 0x2929428, ExecProcNode = 0x6ee438 <ExecAgg>,
ExecProcNodeReal = 0x6ee438 <ExecAgg>, instrument = 0x0, worker_instrument = 0x0, worker_jit_instrument = 0x0,
qual = 0x0, lefttree = 0x2929bb0, righttree = 0x0, initPlan = 0x0, subPlan = 0x0, chgParam = 0x0,
ps_ResultTupleSlot = 0x292a7b0, ps_ExprContext = 0x2929af0, ps_ProjInfo = 0x292a8f0, scandesc = 0x2929f00},
ss_currentRelation = 0x0, ss_currentScanDesc = 0x0, ss_ScanTupleSlot = 0x292a458}, aggs = 0x292ae00, numaggs = 3,
numtrans = 3, aggstrategy = AGG_HASHED, aggsplit = AGGSPLIT_SIMPLE, phase = 0x292aef8, numphases = 1, current_phase = 0,
peragg = 0x29463e0, pertrans = 0x29483f0, hashcontext = 0x2929a30, aggcontexts = 0x2929858, tmpcontext = 0x2929878,
curaggcontext = 0x2929a30, curperagg = 0x0, curpertrans = 0x2949c80, input_done = false, agg_done = false,
projected_set = -1, current_set = 0, grouped_cols = 0x0, all_grouped_cols = 0x292b090, maxsets = 1, phases = 0x292aef8,
sort_in = 0x0, sort_out = 0x0, sort_slot = 0x0, pergroups = 0x0, grp_firstTuple = 0x0, table_filled = true,
num_hashes = 1, perhash = 0x292af50, hash_pergroup = 0x29465f8, all_pergroups = 0x29465f8, combinedproj = 0x0}
(gdb)1.初始化相关变量,如上下文/peragg等
(gdb) n
1970 peragg = aggstate->peragg;
(gdb)
1971 firstSlot = aggstate->ss.ss_ScanTupleSlot;
(gdb)
1977 perhash = &aggstate->perhash[aggstate->current_set];
(gdb)
1983 while (!aggstate->agg_done)
(gdb) p *peragg
$2 = {aggref = 0x293a458, transno = 0, finalfn_oid = 0, finalfn = {fn_addr = 0x0, fn_oid = 0, fn_nargs = 0,
fn_strict = false, fn_retset = false, fn_stats = 0 '\000', fn_extra = 0x0, fn_mcxt = 0x0, fn_expr = 0x0},
numFinalArgs = 1, aggdirectargs = 0x0, resulttypeLen = 4, resulttypeByVal = true, shareable = true}
(gdb) p *peragg->aggref
$3 = {xpr = {type = T_Aggref}, aggfnoid = 2116, aggtype = 23, aggcollid = 0, inputcollid = 0, aggtranstype = 23,
aggargtypes = 0x293a518, aggdirectargs = 0x0, args = 0x293a628, aggorder = 0x0, aggdistinct = 0x0, aggfilter = 0x0,
aggstar = false, aggvariadic = false, aggkind = 110 'n', agglevelsup = 0, aggsplit = AGGSPLIT_SIMPLE, location = 26}
(gdb) p *perhash
$4 = {hashtable = 0x2946890, hashiter = {cur = 0, end = 0, done = false}, hashslot = 0x292b238, hashfunctions = 0x292b2d0,
eqfuncoids = 0x2946700, numCols = 1, numhashGrpCols = 1, largestGrpColIdx = 1, hashGrpColIdxInput = 0x2946660,
hashGrpColIdxHash = 0x2946680, aggnode = 0x2849a30}
(gdb) p aggstate->current_set
$5 = 0
(gdb)2.未完成,循环
2.1从perhash数据结构中获取slot
(gdb) n
1985 TupleTableSlot *hashslot = perhash->hashslot;
(gdb)
1988 CHECK_FOR_INTERRUPTS();
(gdb) p *hashslot
$6 = {type = T_TupleTableSlot, tts_isempty = false, tts_shouldFree = false, tts_shouldFreeMin = false, tts_slow = false,
tts_tuple = 0x0, tts_tupleDescriptor = 0x292b120, tts_mcxt = 0x2929310, tts_buffer = 0, tts_nvalid = 1,
tts_values = 0x292b298, tts_isnull = 0x292b2a0, tts_mintuple = 0x0, tts_minhdr = {t_len = 0, t_self = {ip_blkid = {
bi_hi = 0, bi_lo = 0}, ip_posid = 0}, t_tableOid = 0, t_data = 0x0}, tts_off = 0, tts_fixedTupleDescriptor = true}
(gdb)2.2调用ScanTupleHashTable获取条目
(gdb) n
1993 entry = ScanTupleHashTable(perhash->hashtable, &perhash->hashiter);
(gdb) p perhash->hashiter
$7 = {cur = 0, end = 0, done = false}
(gdb) step
tuplehash_iterate (tb=0x2946720, iter=0x292af58) at ../../../src/include/lib/simplehash.h:829
829 while (!iter->done)
(gdb) n
833 elem = &tb->data[iter->cur];
(gdb) p *tb
$8 = {size = 256, members = 5, sizemask = 255, grow_threshold = 230, data = 0x2950a00, ctx = 0x2929310,
private_data = 0x2946890}
(gdb) p *tb->data
$9 = {firstTuple = 0x0, additional = 0x0, status = 0, hash = 0}
(gdb) p *iter
$10 = {cur = 0, end = 0, done = false}
(gdb) n
836 iter->cur = (iter->cur - 1) & tb->sizemask;
(gdb) n
838 if ((iter->cur & tb->sizemask) == (iter->end & tb->sizemask))
(gdb) p iter->cur
$11 = 255
(gdb)
$12 = 255
(gdb) p iter->cur & tb->sizemask
$13 = 255
(gdb) p iter->end & tb->sizemask
$14 = 0
(gdb) n
840 if (elem->status == SH_STATUS_IN_USE)
(gdb) p *elem
$15 = {firstTuple = 0x0, additional = 0x0, status = 0, hash = 0}
(gdb) n
829 while (!iter->done)
(gdb)
833 elem = &tb->data[iter->cur];
(gdb)
836 iter->cur = (iter->cur - 1) & tb->sizemask;
(gdb)
838 if ((iter->cur & tb->sizemask) == (iter->end & tb->sizemask))
(gdb)
840 if (elem->status == SH_STATUS_IN_USE)
(gdb)
829 while (!iter->done)
(gdb) finish
Run till exit from #0 tuplehash_iterate (tb=0x2946720, iter=0x292af58) at ../../../src/include/lib/simplehash.h:829
0x00000000006eed70 in agg_retrieve_hash_table (aggstate=0x2929640) at nodeAgg.c:1993
1993 entry = ScanTupleHashTable(perhash->hashtable, &perhash->hashiter);
Value returned is $16 = (TupleHashEntryData *) 0x2951d08
(gdb)2.3如返回的条目为NULL,切换到下一个set,如已完成检索,则设置标记,退出
2.4如返回的条目不为NULL,则:
2.4.1重置内econtext上下文
2.4.2存储最小化元组
2.4.3重置firstSlot,存储该虚拟元组
2.4.4准备投影slot并执行最终的聚合运算,投影后如结果不为NULL,则返回此结果.
(gdb) n
1994 if (entry == NULL)
(gdb)
2027 ResetExprContext(econtext);
(gdb)
2033 ExecStoreMinimalTuple(entry->firstTuple, hashslot, false);
(gdb)
2034 slot_getallattrs(hashslot);
(gdb)
2036 ExecClearTuple(firstSlot);
(gdb)
2038 firstSlot->tts_tupleDescriptor->natts * sizeof(bool));
(gdb)
2037 memset(firstSlot->tts_isnull, true,
(gdb)
2040 for (i = 0; i < perhash->numhashGrpCols; i++)
(gdb) x/21x entry->firstTuple->t_bits
0x2942a87: 0x5a470b00 0x7f7e3530 0x7f7f7f7f 0x7f7f7f7f
0x2942a97: 0x0000407f 0x00000000 0x00003000 0x00000000
0x2942aa7: 0x9425c000 0x00000002 0x00000500 0x00000000
0x2942ab7: 0x7f000000 0x7f7f7f7f 0x0000057f 0x00000000
0x2942ac7: 0x7f000000 0x7f7f7f7f 0x942b087f 0x00000002
0x2942ad7: 0x7f000000
(gdb) x/21c entry->firstTuple->t_bits
0x2942a87: 0 '\000' 11 '\v' 71 'G' 90 'Z' 48 '0' 53 '5' 126 '~' 127 '\177'
0x2942a8f: 127 '\177' 127 '\177' 127 '\177' 127 '\177' 127 '\177' 127 '\177' 127 '\177' 127 '\177'
0x2942a97: 127 '\177' 64 '@' 0 '\000' 0 '\000' 0 '\000'
(gdb) n
2042 int varNumber = perhash->hashGrpColIdxInput[i] - 1;
(gdb)
2044 firstSlot->tts_values[varNumber] = hashslot->tts_values[i];
(gdb)
2045 firstSlot->tts_isnull[varNumber] = hashslot->tts_isnull[i];
(gdb)
2040 for (i = 0; i < perhash->numhashGrpCols; i++)
(gdb)
2047 ExecStoreVirtualTuple(firstSlot);
(gdb)
2049 pergroup = (AggStatePerGroup) entry->additional;
(gdb) p *entry
$1 = {firstTuple = 0x2942a78, additional = 0x2942ab0, status = 1, hash = 1229618635}
(gdb) p *entry->firstTuple
$2 = {t_len = 21, mt_padding = "\000\000\000\000\000", t_infomask2 = 1, t_infomask = 2, t_hoff = 24 '\030',
t_bits = 0x2942a87 ""}
(gdb)获取结果
(gdb) n
2055 econtext->ecxt_outertuple = firstSlot;
(gdb) p *pergroup
$3 = {transValue = 5, transValueIsNull = false, noTransValue = false}
(gdb) n
2057 prepare_projection_slot(aggstate,
(gdb)
2061 finalize_aggregates(aggstate, peragg, pergroup);
(gdb)
2063 result = project_aggregates(aggstate);
(gdb)
2064 if (result)
(gdb) p result
$4 = (TupleTableSlot *) 0x2927920
(gdb) p *result
$5 = {type = T_TupleTableSlot, tts_isempty = false, tts_shouldFree = false, tts_shouldFreeMin = false, tts_slow = false,
tts_tuple = 0x0, tts_tupleDescriptor = 0x2927708, tts_mcxt = 0x2926480, tts_buffer = 0, tts_nvalid = 4,
tts_values = 0x2927980, tts_isnull = 0x29279a0, tts_mintuple = 0x0, tts_minhdr = {t_len = 0, t_self = {ip_blkid = {
bi_hi = 0, bi_lo = 0}, ip_posid = 0}, t_tableOid = 0, t_data = 0x0}, tts_off = 0, tts_fixedTupleDescriptor = true}
(gdb) p *result->tts_values
$6 = 43264648
(gdb) p *result->tts_tupleDescriptor
$7 = {natts = 4, tdtypeid = 2249, tdtypmod = -1, tdhasoid = false, tdrefcount = -1, constr = 0x0, attrs = 0x2927728}
(gdb) x/32x result->tts_values
0x2927980: 0x88 0x2a 0x94 0x02 0x00 0x00 0x00 0x00
0x2927988: 0x88 0x47 0x94 0x02 0x00 0x00 0x00 0x00
0x2927990: 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x2927998: 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00
(gdb) p *result->tts_tupleDescriptor->attrs
$8 = {attrelid = 0, attname = {data = "bh", '\000' <repeats 61 times>}, atttypid = 1043, attstattarget = -1, attlen = -1,
attnum = 1, attndims = 0, attcacheoff = -1, atttypmod = 24, attbyval = false, attstorage = 120 'x', attalign = 105 'i',
attnotnull = false, atthasdef = false, atthasmissing = false, attidentity = 0 '\000', attisdropped = false,
attislocal = true, attinhcount = 0, attcollation = 100}
(gdb) p result->tts_tupleDescriptor->attrs[1]
$9 = {attrelid = 0, attname = {data = "avg", '\000' <repeats 60 times>}, atttypid = 1700, attstattarget = -1, attlen = -1,
attnum = 2, attndims = 0, attcacheoff = -1, atttypmod = -1, attbyval = false, attstorage = 109 'm', attalign = 105 'i',
attnotnull = false, atthasdef = false, atthasmissing = false, attidentity = 0 '\000', attisdropped = false,
attislocal = true, attinhcount = 0, attcollation = 0}
(gdb) p result->tts_tupleDescriptor->attrs[2]
$10 = {attrelid = 0, attname = {data = "min", '\000' <repeats 60 times>}, atttypid = 23, attstattarget = -1, attlen = 4,
attnum = 3, attndims = 0, attcacheoff = -1, atttypmod = -1, attbyval = true, attstorage = 112 'p', attalign = 105 'i',
attnotnull = false, atthasdef = false, atthasmissing = false, attidentity = 0 '\000', attisdropped = false,
attislocal = true, attinhcount = 0, attcollation = 0}
(gdb) p result->tts_tupleDescriptor->attrs[3]
$11 = {attrelid = 0, attname = {data = "max", '\000' <repeats 60 times>}, atttypid = 23, attstattarget = -1, attlen = 4,
attnum = 4, attndims = 0, attcacheoff = -1, atttypmod = -1, attbyval = true, attstorage = 112 'p', attalign = 105 'i',
attnotnull = false, atthasdef = false, atthasmissing = false, attidentity = 0 '\000', attisdropped = false,
attislocal = true, attinhcount = 0, attcollation = 0}到此，相信大家对“PostgreSQL ExecAgg中调用的函数是什么”有了更深的了解，不妨来实际操作一番吧！这里是亿速云网站，更多相关内容可以进入相关频道进行查询，关注我们，继续学习！
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
