数据库架构:一主三从
master:192.168.8.57
slave1:192.168.8.58
slave2:192.168.8.59
slave3:192.168.8.61
manager:192.168.8.60
工具包:
mha4mysql-manager-0.58.tar.gz
mha4mysql-node-0.58.tar.gz
keepalived-1.4.5.tar.gz
此项目数据库架构中,master和slave1利用MHA和keepalived实现故障自动切换,slave2和slave3利用 keepalived和LVS实现负载均衡,本文着重讲解负载均衡的搭建过程。
一、安装ipvsadm
在slave2和slave3安装
mount /dev/cdrom /media yum install -y ipvsadm
二、安装keepalived
tar zxvf keepalived-1.4.5.tar.gz cd keepalived-1.4.5 ./configure --prefix=/usr/local/keepalived/ make && make install
设置开机自动启动
systemctl enable keepalived
三、更改keepalived日志位置
keepalived日志默认位置为/var/log/messages
把日志单独存放
修改 vi /usr/local/keepalived/etc/sysconfig/keepalived
把 KEEPALIVED_OPTIONS="-D" 修改为:KEEPALIVED_OPTIONS="-D -d -S 0"
vi /usr/local/keepalived/etc/sysconfig/keepalived # Options for keepalived. See `keepalived --help' output and keepalived(8) and # keepalived.conf(5) man pages for a list of all options. Here are the most # common ones : # # --vrrp -P Only run with VRRP subsystem. # --check -C Only run with Health-checker subsystem. # --dont-release-vrrp -V Dont remove VRRP VIPs & VROUTEs on daemon stop. # --dont-release-ipvs -I Dont remove IPVS topology on daemon stop. # --dump-conf -d Dump the configuration data. # --log-detail -D Detailed log messages. # --log-facility -S 0-7 Set local syslog facility (default=LOG_DAEMON) # KEEPALIVED_OPTIONS="-D -d -S 0"
重启服务
systemctl restart rsyslog
四、修改keepalived配置文件
192.168.8.59
vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived global_defs { router_id 859 notification_email { zdd5503@163.com } notification_email_from zdd5503@163.com smtp_server stmp.163.com smtp_connect_timeout 30 } vrrp_instance v_mysql_slave_wgpt1 { state MASTER interface enp0s3 virtual_router_id 98 priority 100 advert_int 1 nopreempt authentication { auth_type PASS auth_pass steven } virtual_ipaddress { 192.168.8.98/24 } } virtual_server 192.168.8.98 3306 { delay_loop 2 lb_algo rr lb_kind DR persistence_timeout 0 protocol TCP real_server 192.168.8.59 3306 { weight 1 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 3306 } } real_server 192.168.8.61 3306 { weight 1 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 3306 } } }
192.168.8.61
vi /etc/keepalived/keepalived.conf
! Configuration File for keepalived global_defs { router_id 861 notification_email { zdd5503@163.com } notification_email_from zdd5503@163.com smtp_server stmp.163.com smtp_connect_timeout 30 } vrrp_instance v_mysql_slave_wgpt1 { state BACKUP interface enp0s3 virtual_router_id 98 priority 80 advert_int 1 nopreempt authentication { auth_type PASS auth_pass steven } virtual_ipaddress { 192.168.8.98/24 } } virtual_server 192.168.8.98 3306 { delay_loop 2 lb_algo rr lb_kind DR persistence_timeout 0 protocol TCP real_server 192.168.8.59 3306 { weight 1 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 3306 } } real_server 192.168.8.61 3306 { weight 1 TCP_CHECK { connect_timeout 3 nb_get_retry 3 delay_before_retry 3 connect_port 3306 } } }
systemctl daemon-reload
systemctl start keepalived
systemctl enable keepalived
ps -ef |grep keepalived
ip a
五、lo:0绑定VIP地址、抑制ARP广播
192.168.8.59
vi /etc/rc.d/init.d/lvsmysql.sh
#!/bin/bash # . /etc/rc.d/init.d/functions VIP1=$1 case "$2" in start) echo " Start LVS of MySQL Slave REALServer" /sbin/ifconfig lo:0 $VIP1 broadcast $VIP1 netmask 255.255.255.255 up /sbin/route add -host $VIP1 dev lo:0 echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce sysctl -p >/dev/null 2>&1 ;; stop) /sbin/ifconfig lo:0 down /sbin/route del $VIP1 >/dev/null 2>&1 echo "Stoped LVS of MySQL Slave Directorserver" echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce ;; status) isLoOn=`/sbin/ifconfig lo:0 | grep "$VIP"` isRoOn=`/bin/netstat -rn | grep "$VIP"` if [ "$isLoON" == "" -a "$isRoOn" == "" ]; then echo "LVS-DR real server has run yet." else echo "LVS-DR real server is running." fi exit 3 ;; *) echo "Usage: $0 {start|stop|status}" exit 1 esac exit 0
192.168.8.61
vi /etc/rc.d/init.d/lvsmysql.sh
#!/bin/bash # . /etc/rc.d/init.d/functions VIP1=$1 case "$2" in start) echo " Start LVS of MySQL Slave REALServer" /sbin/ifconfig lo:0 $VIP1 broadcast $VIP1 netmask 255.255.255.255 up /sbin/route add -host $VIP1 dev lo:0 echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce sysctl -p >/dev/null 2>&1 ;; stop) /sbin/ifconfig lo:0 down /sbin/route del $VIP1 >/dev/null 2>&1 echo "Stoped LVS of MySQL Slave Directorserver" echo "0" >/proc/sys/net/ipv4/conf/lo/arp_ignore echo "0" >/proc/sys/net/ipv4/conf/lo/arp_announce echo "0" >/proc/sys/net/ipv4/conf/all/arp_ignore echo "0" >/proc/sys/net/ipv4/conf/all/arp_announce ;; status) isLoOn=`/sbin/ifconfig lo:0 | grep "$VIP"` isRoOn=`/bin/netstat -rn | grep "$VIP"` if [ "$isLoON" == "" -a "$isRoOn" == "" ]; then echo "LVS-DR real server has run yet." else echo "LVS-DR real server is running." fi exit 3 ;; *) echo "Usage: $0 {start|stop|status}" exit 1 esac exit 0
六、测试负载均衡
/etc/rc.d/init.d/lvsmysql.sh 192.168.8.59 start
/etc/rc.d/init.d/lvsmysql.sh 192.168.8.59 stop
/etc/rc.d/init.d/lvsmysql.sh 192.168.8.61 start
/etc/rc.d/init.d/lvsmysql.sh 192.168.8.61 stop
echo "/etc/rc.d/init.d/lvsmysql.sh 192.168.1.65 start" >>
/etc/rc.d/rc.local
echo "ipvsadm --set 15 5 15" >> /etc/rc.d/rc.local
ifconfig
ipvsadm -L
mysql -uroot -pmysql -h292.168.8.59 -e "select @@hostname;"
mysql -uroot -pmysql -h292.168.8.61 -e "select @@hostname;
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。