Solaris系统如何删除硬Raid中的卷

这篇文章主要为大家展示了“Solaris系统如何删除硬Raid中的卷”，内容简而易懂，条理清晰，希望能够帮助大家解决疑惑，下面让小编带领大家一起研究并学习一下“Solaris系统如何删除硬Raid中的卷”这篇文章吧。

SPARC T4-2, No Keyboard
Copyright (c) 1998, 2012, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.34.2.a, 130560 MB memory available, Serial #103652546.
Ethernet address 0:10:e0:2d:9c:c2, Host ID: 862d9cc2.




启动到以下时，立即按下Ctrl+Break 即可进入OK模式
Boot device: /pci@400/pci@2/pci@0/pci@e/scsi@0/disk@w3659e9e2459216be,0:a  File and args: 


{0} ok 
{0} ok 
{0} ok 
{0} ok 
{0} ok devalias
{0} ok 
{0} ok 
{0} ok     
{0} ok select /pci@400/pci@2/pci@0/pci@e/scsi
{0} ok 
{0} ok 
{0} ok show-children
{0} ok show-children


FCode Version 1.00.61, MPT Version 2.00, Firmware Version 9.00.00.00


Target a 
  Unit 0   Removable Read Only device   TEAC     DV-W28SS-W       1.0A
  SATA device  PhyNum 7 
Target 381 Volume 0 
  Unit 0   Disk   LSI      Logical Volume   3000    583983104 Blocks, 298 GB
  VolumeDeviceName 3659e9e2459216be  VolumeWWID 0659e9e2459216be
{0} ok 
{0} ok show-volumes
Volume 0 Target 381  Type RAID1 (Mirroring)
  WWID 0659e9e2459216be
  Optimal  Enabled  Volume Not Consistent 
  2 Members                                         583983104 Blocks, 298 GB
  Disk 1 
    Primary  Optimal 
    Target b      HITACHI  H109030SESUN300G A31A   PhyNum 1 
  Disk 0 
    Secondary  Optimal 
    Target 9      HITACHI  H109030SESUN300G A31A   PhyNum 0 
{0} ok 0 delete-volume ————————————若已做硬Raid后删除volume方法
The volume and its data will be deleted
Are you sure (yes/no)?  [no] yes



创建Raid


{0} ok 
{0} ok devalias
screen                   /pci@400/pci@2/pci@0/pci@0/pci@0/display@0
mouse                    /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/device@4/mouse@1
rcdrom                   /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/hub@3/storage@2/disk@0
rkeyboard                /pci@400/pci@2/pci@0/pci@f/pci@0/usb@0,2/hub@2/device@4/keyboard@0
rscreen                  /pci@400/pci@2/pci@0/pci@0/pci@0/display@0:r1280x1024x60
net3                     /pci@400/pci@2/pci@0/pci@7/network@0,1
net2                     /pci@400/pci@2/pci@0/pci@7/network@0
net1                     /pci@400/pci@2/pci@0/pci@6/network@0,1
net0                     /pci@400/pci@2/pci@0/pci@6/network@0
net                      /pci@400/pci@2/pci@0/pci@6/network@0
disk7                    /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p3
disk6                    /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p2
disk5                    /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p1
disk4                    /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p0
cdrom                    /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p6
scsi1                    /pci@400/pci@2/pci@0/pci@4/scsi@0
disk3                    /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@p3
disk2                    /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@p2
disk1                    /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@p1
disk0                    /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@p0
disk                     /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@p0
scsi0                    /pci@400/pci@1/pci@0/pci@4/scsi@0
scsi                     /pci@400/pci@1/pci@0/pci@4/scsi@0
virtual-console          /virtual-devices@100/console@1
name                     aliases
{0} ok select /pci@400/pci@1/pci@0/pci@4/scsi@0
{0} ok 
{0} ok show-children


FCode Version 1.00.64, MPT Version 2.00, Firmware Version 9.05.00.00


Target 9 
  Unit 0   Disk   HITACHI  H109030SESUN300G A606    585937500 Blocks, 300 GB
  SASDeviceName 5000cca043c183a8  SASAddress 5000cca043c183a9  PhyNum 0 
Target a 
  Unit 0   Disk   HITACHI  H109030SESUN300G A606    585937500 Blocks, 300 GB
  SASDeviceName 5000cca0439a72dc  SASAddress 5000cca0439a72dd  PhyNum 1 
{0} ok 
{0} ok 
{0} ok 
{0} ok 
{0} ok  show-volumes
No volumes to show
{0} ok 
{0} ok 
{0} ok 
{0} ok 
{0} ok 
{0} ok 
{0} ok 
{0} ok 
{0} ok 9 a create-raid1-volume
Target 9 size is 583983104 Blocks, 298 GB
Target a size is 583983104 Blocks, 298 GB
The volume can be any size from 1 MB to 285148 MB
What size do you want?  [285148] 
Volume size will be 583983104 Blocks, 298 GB
Enter a volume name:  [0 to 15 characters] 
Volume has been created
{0} ok 
{0} ok 
{0} ok 
{0} ok show-volumes
Volume 0 Target 381  Type RAID1 (Mirroring)
  WWID 0477a3800477505c
  Optimal  Enabled  Background Init In Progress 
  2 Members                                         583983104 Blocks, 298 GB
  Disk 0 
    Primary  Optimal 
    Target 9      HITACHI  H109030SESUN300G A606   PhyNum 0 
  Disk 1 
    Secondary  Optimal 
    Target a      HITACHI  H109030SESUN300G A606   PhyNum 1 
{0} ok 
{0} ok 
{0} ok  unselect-dev
{0} ok 
{0} ok 
{0} ok boot cdrom -s
Boot device: /pci@400/pci@2/pci@0/pci@4/scsi@0/disk@p6  File and args: -s


464128  5654784


# format     
Searching for disks...WARNING: /pci@400/pci@1/pci@0/pci@4/scsi@0/iport@v0/disk@w3477a3800477505c,0 (sd6):
        Corrupt label; wrong magic number


WARNING: /pci@400/pci@1/pci@0/pci@4/scsi@0/iport@v0/disk@w3477a3800477505c,0 (sd6):
        Corrupt label; wrong magic number


done


c0t3477A3800477505Cd0: configured with capacity of 277.99GB




AVAILABLE DISK SELECTIONS:
       0. c0t3477A3800477505Cd0 <LSI-LogicalVolume-3000 cyl 65533 alt 2 hd 64 sec 139>
          /pci@400/pci@1/pci@0/pci@4/scsi@0/iport@v0/disk@w3477a3800477505c,0
Specify disk (enter its number): 0
selecting c0t3477A3800477505Cd0
[disk formatted]
WARNING: /pci@400/pci@1/pci@0/pci@4/scsi@0/iport@v0/disk@w3477a3800477505c,0 (sd6):
        Corrupt label; wrong magic number


Disk not labeled.  Label it now? y



Executing begin script "begin.sh"...
0. c0t3477A3800477505Cd0
Please select the disk you will install your system!
Default value is : 0


Begin script begin.sh execution completed.
Searching for SolStart directory...
Checking rules.ok file...
Using begin script: install_begin
Using finish script: patch_finish
Executing SolStart preinstall phase...
Executing begin script "install_begin"...
Begin script install_begin execution completed.


Processing profile
        - Opening Flash archive
        - Validating Flash archive
        - Selecting all disks
        - Configuring boot device
        - Configuring / (c0t3477A3800477505Cd0s0)
        - Configuring swap (c0t3477A3800477505Cd0s1)
        - Configuring /var (c0t3477A3800477505Cd0s3)
        - Configuring /export/home (c0t3477A3800477505Cd0s4)
        - Configuring /oracle (c0t3477A3800477505Cd0s5)
        - Configuring /metadb (c0t3477A3800477505Cd0s6)


Verifying disk configuration
        - WARNING: Unused disk space (c0t3477A3800477505Cd0)
        - WARNING: Changing the system's default boot device in the EEPROM


Verifying space allocation
        NOTE: 2 archives did not include size information


Preparing system for Flash install


Configuring disk (c0t3477A3800477505Cd0)
        - Creating Solaris disk label (VTOC)


Creating and checking file systems
        - Creating / (c0t3477A3800477505Cd0s0)
        - Creating /var (c0t3477A3800477505Cd0s3)
2015-12-24 09:39:24  0:0:0> NOTICE:  Loaded ASR status DB data. Ver. 3.
2015-12-24 09:39:25  0:0:0> NOTICE:  Initializing TPM with:
                        tpm_enable = false
                        tpm_activate = false
                        tpm_forceclear = false
2015-12-24 09:39:25  0:0:0> NOTICE:  TPM found: Ver 1.2, Rev 3.19, SpecLevel 2, errataRev 2, VendorId 'IFX'
2015-12-24 09:39:25  0:0:0> NOTICE:  TPM initialized successfully. Current state is: disabled
2015-12-24 09:39:25  0:0:0> NOTICE:  Serial#:     00000000000006aa.355b58c0867b8e6b
2015-12-24 09:39:25  0:0:0> NOTICE:  Version:     003e003013030607
2015-12-24 09:39:26  0:0:0> NOTICE:  T4 Revision: 1.3


禁掉VCS多路径：
bash-3.2# vxdiskadm 




Volume Manager Support Operations
Menu: VolumeManager/Disk


 1      Add or initialize one or more disks
 2      Encapsulate one or more disks
 3      Remove a disk
 4      Remove a disk for replacement
 5      Replace a failed or removed disk
 6      Mirror volumes on a disk
 7      Move volumes from a disk
 8      Enable access to (import) a disk group
 9      Remove access to (deport) a disk group
 10     Enable (online) a disk device
 11     Disable (offline) a disk device
 12     Mark a disk as a spare for a disk group
 13     Turn off the spare flag on a disk
 14     Unrelocate subdisks back to a disk
 15     Exclude a disk from hot-relocation use
 16     Make a disk available for hot-relocation use
 17     Prevent multipathing/Suppress devices from VxVM's view
 18     Allow multipathing/Unsuppress devices from VxVM's view
 19     List currently suppressed/non-multipathed devices
 20     Change the disk naming scheme
 21     Get the newly connected/zoned disks in VxVM view
 22     Change/Display the default disk layouts
 list   List disk information




 ?      Display help about menu
 ??     Display help about the menuing system
 q      Exit from menus


Select an operation to perform: 




Exclude Devices
Menu: VolumeManager/Disk/ExcludeDevices
  VxVM  INFO V-5-2-5950
This operation might lead to some devices being suppressed from VxVM's view
(This operation can be reversed using the vxdiskadm command).


Do you want to continue ? [y,n,q,?]  (default: y) 

以上是“Solaris系统如何删除硬Raid中的卷”这篇文章的所有内容，感谢各位的阅读！相信大家都有了一定的了解，希望分享的内容对大家有所帮助，如果还想学习更多知识，欢迎关注亿速云行业资讯频道！