这期内容当中小编将会给大家带来有关CentOS7中怎么动态扩容LVM，文章内容丰富且以专业的角度为大家分析和叙述，阅读完这篇文章希望大家可以有所收获。
CentOS7上面的磁盘空间有点紧张，需要扩容。
[root@xxx ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT fd0 2:0 1 4K 0 disk sda 8:0 0 200G 0 disk ├─sda1 8:1 0 500M 0 part /boot └─sda2 8:2 0 15.5G 0 part ├─centos-swap 253:0 0 1.6G 0 lvm [SWAP] └─centos-root 253:1 0 13.9G 0 lvm / sr0 11:0 1 1024M 0 rom loop0 7:0 0 4.3G 0 loop /mnt/iso
[root@xxx ~]# df -h 文件系统 容量 已用 可用 已用% 挂载点 /dev/mapper/centos-root 14G 14G 20K 100% / devtmpfs 3.8G 0 3.8G 0% /dev tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs 3.9G 442M 3.4G 12% /run tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 497M 295M 202M 60% /boot tmpfs 782M 12K 782M 1% /run/user/42 /dev/loop0 4.3G 4.3G 0 100% /mnt/iso tmpfs 782M 0 782M 0% /run/user/0
[root@xxx ~]# gdisk /dev/sda GPT fdisk (gdisk) version 0.8.10 Partition table scan: MBR: MBR only BSD: not present APM: not present GPT: not present *************************************************************** Found invalid GPT and valid MBR; converting MBR to GPT format in memory. THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by typing 'q' if you don't want to convert your MBR partitions to GPT format! *************************************************************** Command (? for help): p Disk /dev/sda: 419430400 sectors, 200.0 GiB Logical sector size: 512 bytes Disk identifier (GUID): FE64D670-2841-445E-974F-12A258105C57 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 419430366 Partitions will be aligned on 2048-sector boundaries Total free space is 385877949 sectors (184.0 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 1026047 500.0 MiB 8300 Linux filesystem 2 1026048 33554431 15.5 GiB 8E00 Linux LVM
[root@xxx ~]# gdisk /dev/sda
GPT fdisk (gdisk) version 0.8.10
Partition table scan:
MBR: MBR only
BSD: not present
APM: not present
GPT: not present
***************************************************************
Found invalid GPT and valid MBR; converting MBR to GPT format
in memory. THIS OPERATION IS POTENTIALLY DESTRUCTIVE! Exit by
typing 'q' if you don't want to convert your MBR partitions
to GPT format!
***************************************************************
Command (? for help): n
Partition number (3-128, default 3):
First sector (34-419430366, default = 33554432) or {+-}size{KMGTP}:
Last sector (33554432-419430366, default = 419430366) or {+-}size{KMGTP}: +84G
Current type is 'Linux filesystem'
Hex code or GUID (L to show codes, Enter = 8300): L
0700 Microsoft basic data 0c01 Microsoft reserved 2700 Windows RE
3000 ONIE boot 3001 ONIE config 4100 PowerPC PReP boot
4200 Windows LDM data 4201 Windows LDM metadata 7501 IBM GPFS
7f00 ChromeOS kernel 7f01 ChromeOS root 7f02 ChromeOS reserved
8200 Linux swap 8300 Linux filesystem 8301 Linux reserved
8302 Linux /home 8400 Intel Rapid Start 8e00 Linux LVM
a500 FreeBSD disklabel a501 FreeBSD boot a502 FreeBSD swap
a503 FreeBSD UFS a504 FreeBSD ZFS a505 FreeBSD Vinum/RAID
a580 Midnight BSD data a581 Midnight BSD boot a582 Midnight BSD swap
a583 Midnight BSD UFS a584 Midnight BSD ZFS a585 Midnight BSD Vinum
a800 Apple UFS a901 NetBSD swap a902 NetBSD FFS
a903 NetBSD LFS a904 NetBSD concatenated a905 NetBSD encrypted
a906 NetBSD RAID ab00 Apple boot af00 Apple HFS/HFS+
af01 Apple RAID af02 Apple RAID offline af03 Apple label
af04 AppleTV recovery af05 Apple Core Storage be00 Solaris boot
bf00 Solaris root bf01 Solaris /usr & Mac Z bf02 Solaris swap
bf03 Solaris backup bf04 Solaris /var bf05 Solaris /home
bf06 Solaris alternate se bf07 Solaris Reserved 1 bf08 Solaris Reserved 2
bf09 Solaris Reserved 3 bf0a Solaris Reserved 4 bf0b Solaris Reserved 5
c001 HP-UX data c002 HP-UX service ea00 Freedesktop $BOOT
eb00 Haiku BFS ed00 Sony system partitio ed01 Lenovo system partit
Press the <Enter> key to see more codes: 8e00
ef00 EFI System ef01 MBR partition scheme ef02 BIOS boot partition
fb00 VMWare VMFS fb01 VMWare reserved fc00 VMWare kcore crash p
fd00 Linux RAID
Hex code or GUID (L to show codes, Enter = 8300): 8e00
Changed type of partition to 'Linux LVM'
Command (? for help): p
Disk /dev/sda: 419430400 sectors, 200.0 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): F8A75D30-20AF-412A-A7CD-F66D4A57D232
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 419430366
Partitions will be aligned on 2048-sector boundaries
Total free space is 209717181 sectors (100.0 GiB)
Number Start (sector) End (sector) Size Code Name
1 2048 1026047 500.0 MiB 8300 Linux filesystem
2 1026048 33554431 15.5 GiB 8E00 Linux LVM
3 33554432 209715199 84.0 GiB 8E00 Linux LVM
Command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/sda.
Warning: The kernel is still using the old partition table.
The new table will be used at the next reboot.
The operation has completed successfully.这里需要注意的地方就是，扩容了84G，并且使用8e00。
[root@xxx ~]# partprobe -s /dev/sda: gpt partitions 1 2 3 [root@xxx ~]# lsblk NAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINT fd0 2:0 1 4K 0 disk sda 8:0 0 200G 0 disk ├─sda1 8:1 0 500M 0 part /boot ├─sda2 8:2 0 15.5G 0 part │ ├─centos-swap 253:0 0 1.6G 0 lvm [SWAP] │ └─centos-root 253:1 0 13.9G 0 lvm / └─sda3 8:3 0 84G 0 part sr0 11:0 1 1024M 0 rom loop0 7:0 0 4.3G 0 loop /mnt/iso
[root@xxx ~]# gdisk -l /dev/sda GPT fdisk (gdisk) version 0.8.10 Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Disk /dev/sda: 419430400 sectors, 200.0 GiB Logical sector size: 512 bytes Disk identifier (GUID): F8A75D30-20AF-412A-A7CD-F66D4A57D232 Partition table holds up to 128 entries First usable sector is 34, last usable sector is 419430366 Partitions will be aligned on 2048-sector boundaries Total free space is 209717181 sectors (100.0 GiB) Number Start (sector) End (sector) Size Code Name 1 2048 1026047 500.0 MiB 8300 Linux filesystem 2 1026048 33554431 15.5 GiB 8E00 Linux LVM 3 33554432 209715199 84.0 GiB 8E00 Linux LVM
[root@xxx ~]# pvdisplay --- Physical volume --- PV Name /dev/sda2 VG Name centos PV Size 15.51 GiB / not usable 3.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 3970 Free PE 0 Allocated PE 3970 PV UUID S13vMN-W0wQ-HCae-fPKa-bClZ-RzW0-39xc9C
现在PV的大小是15G。
[root@xxx ~]# pvcreate /dev/sda3 Physical volume "/dev/sda3" successfully created.
[root@xxx ~]# pvdisplay --- Physical volume --- PV Name /dev/sda2 VG Name centos PV Size 15.51 GiB / not usable 3.00 MiB Allocatable yes (but full) PE Size 4.00 MiB Total PE 3970 Free PE 0 Allocated PE 3970 PV UUID S13vMN-W0wQ-HCae-fPKa-bClZ-RzW0-39xc9C "/dev/sda3" is a new physical volume of "84.00 GiB" --- NEW Physical volume --- PV Name /dev/sda3 VG Name PV Size 84.00 GiB Allocatable NO PE Size 0 Total PE 0 Free PE 0 Allocated PE 0 PV UUID Ssb5Y6-gD5q-heAE-sil9-oIU3-kdX8-B0pqLS
[root@xxx ~]# vgdisplay --- Volume group --- VG Name centos System ID Format lvm2 Metadata Areas 1 Metadata Sequence No 3 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 1 Act PV 1 VG Size <15.51 GiB PE Size 4.00 MiB Total PE 3970 Alloc PE / Size 3970 / <15.51 GiB Free PE / Size 0 / 0 VG UUID F3IvIs-uz92-m9d6-XYYL-0QvN-xqs8-qxD9fC
VG也是15G。
[root@xxx ~]# vgextend centos /dev/sda3 Volume group "centos" successfully extended
在这个阶段遇到Couldn't create temporary archive name.问题，只需要清理一部分无用文件腾出一点点磁盘空间即可。
[root@xxx ~]# vgdisplay --- Volume group --- VG Name centos System ID Format lvm2 Metadata Areas 2 Metadata Sequence No 5 VG Access read/write VG Status resizable MAX LV 0 Cur LV 2 Open LV 2 Max PV 0 Cur PV 2 Act PV 2 VG Size 99.50 GiB PE Size 4.00 MiB Total PE 25473 Alloc PE / Size 3970 / <15.51 GiB Free PE / Size 21503 / <84.00 GiB VG UUID F3IvIs-uz92-m9d6-XYYL-0QvN-xqs8-qxD9fC
Free部分已经不是0了。
[root@xxx ~]# lvdisplay --- Logical volume --- LV Path /dev/centos/swap LV Name swap VG Name centos LV UUID c2sXrl-GC3c-nXbi-lED4-MqXx-5FPx-872laM LV Write Access read/write LV Creation host, time tamtest.hngytobacco.com, 2017-06-26 12:02:56 +0800 LV Status available # open 2 LV Size 1.60 GiB Current LE 410 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:0 --- Logical volume --- LV Path /dev/centos/root LV Name root VG Name centos LV UUID r2qZe6-X3zx-D7te-U0t0-iJDF-VyWf-xl5by8 LV Write Access read/write LV Creation host, time tamtest.hngytobacco.com, 2017-06-26 12:02:57 +0800 LV Status available # open 1 LV Size <13.91 GiB Current LE 3560 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:1
这里主要扩容这个LV：/dev/centos/root。
[root@xxx ~]# lvresize -L +83.99GB /dev/centos/root Rounding size to boundary between physical extents: 83.99 GiB. Size of logical volume centos/root changed from <13.91 GiB (3560 extents) to <97.90 GiB (25062 extents). Logical volume centos/root successfully resized
[root@xxx ~]# lvdisplay --- Logical volume --- LV Path /dev/centos/swap LV Name swap VG Name centos LV UUID c2sXrl-GC3c-nXbi-lED4-MqXx-5FPx-872laM LV Write Access read/write LV Creation host, time tamtest.hngytobacco.com, 2017-06-26 12:02:56 +0800 LV Status available # open 2 LV Size 1.60 GiB Current LE 410 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:0 --- Logical volume --- LV Path /dev/centos/root LV Name root VG Name centos LV UUID r2qZe6-X3zx-D7te-U0t0-iJDF-VyWf-xl5by8 LV Write Access read/write LV Creation host, time tamtest.hngytobacco.com, 2017-06-26 12:02:57 +0800 LV Status available # open 1 LV Size <97.90 GiB Current LE 25062 Segments 2 Allocation inherit Read ahead sectors auto - currently set to 8192 Block device 253:1
[root@xxx ~]# xfs_growfs / meta-data=/dev/mapper/centos-root isize=256 agcount=4, agsize=911360 blks = sectsz=512 attr=2, projid32bit=1 = crc=0 finobt=0 spinodes=0 data = bsize=4096 blocks=3645440, imaxpct=25 = sunit=0 swidth=0 blks naming =version 2 bsize=4096 ascii-ci=0 ftype=0 log =internal bsize=4096 blocks=2560, version=2 = sectsz=512 sunit=0 blks, lazy-count=1 realtime =none extsz=4096 blocks=0, rtextents=0 data blocks changed from 3645440 to 25663488
[root@xxx ~]# df -lh 文件系统 容量 已用 可用 已用% 挂载点 /dev/mapper/centos-root 98G 14G 84G 15% / devtmpfs 3.8G 0 3.8G 0% /dev tmpfs 3.9G 0 3.9G 0% /dev/shm tmpfs 3.9G 442M 3.4G 12% /run tmpfs 3.9G 0 3.9G 0% /sys/fs/cgroup /dev/sda1 497M 295M 202M 60% /boot tmpfs 782M 12K 782M 1% /run/user/42 /dev/loop0 4.3G 4.3G 0 100% /mnt/iso tmpfs 782M 0 782M 0% /run/user/0
主要就是创建8e分区，然后用pvcreate命令创建PV，再使用vgextend命令来扩容VG，再使用lvresize命令扩容LV，最后使用xfs_growfs命令更新扩容。
上述就是小编为大家分享的CentOS7中怎么动态扩容LVM了，如果刚好有类似的疑惑，不妨参照上述分析进行理解。如果想知道更多相关知识，欢迎关注亿速云行业资讯频道。
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
