这篇文章主要讲解了“MyBatis启动以及各种类的作用”,文中的讲解内容简单清晰,易于学习与理解,下面请大家跟着小编的思路慢慢深入,一起来研究和学习“MyBatis启动以及各种类的作用”吧!
MyBatis 作为目前最常用的持久层框架之一,分析其源码,对我们的使用过程中可更好的运用它。本系列基于mybatis-3.4.6
进行分析。 MyBatis 的初始化工作就是解析主配置文件,映射配置文件以及注解信息。然后保存在org.apache.ibatis.session.Configuration
,供后期执行数据请求的相关调用。 Configuration
里有大量配置信息,在后面每涉及到一个相关配置,会进行详细的分析。
public static void main(String[] args) throws IOException {
// 获取配置文件
Reader reader = Resources.getResourceAsReader("mybatis-config.xml");
// 通过 SqlSessionFactoryBuilder 构建 sqlSession 工厂
SqlSessionFactory sqlSessionFactory = new SqlSessionFactoryBuilder().build(reader);
// 获取 sqlSession 实例
SqlSession sqlSession = sqlSessionFactory.openSession();
reader.close();
sqlSession.close();
}
SqlSessionFactoryBuilder 的build()
是Mybatis启动的初始化入口,使用builder模式加载配置文件。 通过查看该类,使用方法重载,有以下9个方法:
方法重载最终实现处理的方法源码如下:
public SqlSessionFactory build(Reader reader, String environment, Properties properties) {
try {
// 实例化 XMLConfigBuilder,用于读取配置文件信息
XMLConfigBuilder parser = new XMLConfigBuilder(reader, environment, properties);
// 解析配置信息,保存到 Configuration
return build(parser.parse());
} catch (Exception e) {
throw ExceptionFactory.wrapException("Error building SqlSession.", e);
} finally {
ErrorContext.instance().reset();
try {
reader.close();
} catch (IOException e) {
// Intentionally ignore. Prefer previous error.
}
}
}
environment 是指定加载环境,默认值为 null。
properties 是属性配置文件,默认值为 null。 同时读取配置文件既可字符流读取,也支持字节流读取。
public SqlSessionFactory build(InputStream inputStream, String environment, Properties properties) {
try {
XMLConfigBuilder parser = new XMLConfigBuilder(inputStream, environment, properties);
return build(parser.parse());
} catch (Exception e) {
throw ExceptionFactory.wrapException("Error building SqlSession.", e);
} finally {
ErrorContext.instance().reset();
try {
inputStream.close();
} catch (IOException e) {
// Intentionally ignore. Prefer previous error.
}
}
}
通过 SqlSessionFactoryBuilder 中 XMLConfigBuilder parser = new XMLConfigBuilder(reader, environment, properties)
, 分析 XMLConfigBuilder实例化过程。 该类中有四个变量:
private boolean parsed;
private final XPathParser parser;
private String environment;
private final ReflectorFactory localReflectorFactory = new DefaultReflectorFactory();
parsed 是否解析,一次解析即可。用于标志配置文件只解析一次,true
为已解析过。
parser 解析配置的解析器
environment 加载环境,即 SqlSessionFactoryBuilder
中的 environment
localReflectorFactory 用于创建和缓存Reflector
对象,一个类对应一个Reflector
。因为参数处理、结果映射等操作时,会涉及大量的反射操作。DefaultReflectorFactory
实现类比较简单,这里不再进行讲解。
XMLConfigBuilder构建函数实现:
public XMLConfigBuilder(Reader reader, String environment, Properties props) {
this(new XPathParser(reader, true, props, new XMLMapperEntityResolver()), environment, props);
}
XPathParser
对象首先实例化 XPathParser
对象,里面定义了5个变量:
private final Document document;
private boolean validation;
private EntityResolver entityResolver;
private Properties variables;
private XPath xpath;
document 保存document对象
validation xml解析时是否验证文档
entityResolver 加载dtd文件
variables 配置文件定义<properties>的值
xpath Xpath对象,用于对XML文件节点的操作
XPathParser
对象构造函数有:
函数里面都处理了两件事:
public XPathParser(Reader reader, boolean validation, Properties variables, EntityResolver entityResolver) {
commonConstructor(validation, variables, entityResolver);
this.document = createDocument(new InputSource(reader));
}
初始化赋值,和创建XPath
对象,用于对XML文件节点的操作。
private void commonConstructor(boolean validation, Properties variables, EntityResolver entityResolver) {
this.validation = validation;
this.entityResolver = entityResolver;
this.variables = variables;
// 创建Xpath对象,用于对XML文件节点的操作
XPathFactory factory = XPathFactory.newInstance();
this.xpath = factory.newXPath();
}
创建Document
对象并赋值到document
变量, 这里属于Document创建的操作,不再详细讲述,不懂可以点击这里查看API
private Document createDocument(InputSource inputSource) {
// important: this must only be called AFTER common constructor
try {
// 实例化 DocumentBuilderFactory 对象,用于创建 DocumentBuilder 对象
DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
// 是否校验文档
factory.setValidating(validation);
// 设置 DocumentBuilderFactory 的配置
factory.setNamespaceAware(false);
factory.setIgnoringComments(true);
factory.setIgnoringElementContentWhitespace(false);
factory.setCoalescing(false);
factory.setExpandEntityReferences(true);
// 创建 DocumentBuilder
DocumentBuilder builder = factory.newDocumentBuilder();
builder.setEntityResolver(entityResolver);
builder.setErrorHandler(new ErrorHandler() {
@Override
public void error(SAXParseException exception) throws SAXException {
throw exception;
}
@Override
public void fatalError(SAXParseException exception) throws SAXException {
throw exception;
}
@Override
public void warning(SAXParseException exception) throws SAXException {
}
});
// 加载文件
return builder.parse(inputSource);
} catch (Exception e) {
throw new BuilderException("Error creating document instance. Cause: " + e, e);
}
}
XMLConfigBuilder
构造函数赋值 private XMLConfigBuilder(XPathParser parser, String environment, Properties props) {
super(new Configuration());
ErrorContext.instance().resource("SQL Mapper Configuration");
this.configuration.setVariables(props);
this.parsed = false;
this.environment = environment;
this.parser = parser;
}
初始化父类BaseBuilder
的值。
将外部值赋值给对象。
将实例化的XPathParser
赋值给parser
。
最后返回XMLConfigBuilder
对象。
通过 XMLConfigBuilder.parse()
解析配置信息,保存至Configuration
。解析详解在后面文章中进行分析。
public Configuration parse() {
// 是否解析过配置文件
if (parsed) {
throw new BuilderException("Each XMLConfigBuilder can only be used once.");
}
// 标志解析过,定义为 true
parsed = true;
// 解析 configuration 节点中的信息
parseConfiguration(parser.evalNode("/configuration"));
return configuration;
}
DefaultSqlSessionFactory
实现了SqlSessionFactory
接口。 通过上面解析得到的Configuration
,调用SqlSessionFactoryBuilder.build(Configuration config)
创建一个 DefaultSqlSessionFactory
。
public SqlSessionFactory build(Configuration config) {
return new DefaultSqlSessionFactory(config);
}
实例化DefaultSqlSessionFactory
的过程,就是将Configuration
传递给DefaultSqlSessionFactory
成员变量configuration
。
public DefaultSqlSessionFactory(Configuration configuration) {
this.configuration = configuration;
}
通过调用SqlSessionFactory.openSession()
创建SqlSession
。
public interface SqlSessionFactory {
// 默认创建
SqlSession openSession();
SqlSession openSession(boolean autoCommit);
SqlSession openSession(Connection connection);
SqlSession openSession(TransactionIsolationLevel level);
SqlSession openSession(ExecutorType execType);
SqlSession openSession(ExecutorType execType, boolean autoCommit);
SqlSession openSession(ExecutorType execType, TransactionIsolationLevel level);
SqlSession openSession(ExecutorType execType, Connection connection);
Configuration getConfiguration();
}
autoCommit 是否自动提交事务,
level 事务隔离级别(共5个级别), 可查看相关源码
connection 连接
execType 执行器的类型:SIMPLE
(不做特殊处理), REUSE
(复用预处理语句), BATCH
(会批量执行)
因为上面DefaultSqlSessionFactory
实现了SqlSessionFactory
接口,所以进入到DefaultSqlSessionFactory
查看openSession()
。
public SqlSession openSession() {
return openSessionFromDataSource(configuration.getDefaultExecutorType(), null, false);
}
openSession()
方法最终实现代码如下:
private SqlSession openSessionFromDataSource(ExecutorType execType, TransactionIsolationLevel level, boolean autoCommit) {
Transaction tx = null;
try {
// 获取configuration中的加载环境
final Environment environment = configuration.getEnvironment();
// 获取事务工厂
final TransactionFactory transactionFactory = getTransactionFactoryFromEnvironment(environment);
// 创建一个事务
tx = transactionFactory.newTransaction(environment.getDataSource(), level, autoCommit);
// 生成一个处理器,事务保存在处理器 BaseExecutor 中
final Executor executor = configuration.newExecutor(tx, execType);
// 实例化一个 DefaultSqlSession,DefaultSqlSession实现了SqlSession接口
return new DefaultSqlSession(configuration, executor, autoCommit);
} catch (Exception e) {
// 异常情况下关闭事务
closeTransaction(tx); // may have fetched a connection so lets call close()
throw ExceptionFactory.wrapException("Error opening session. Cause: " + e, e);
} finally {
// 充值错误实例上下文
ErrorContext.instance().reset();
}
}
生成处理器Configuration.newExecutor(Transaction transaction, ExecutorType executorType)
:
public Executor newExecutor(Transaction transaction, ExecutorType executorType) {
// 默认为 ExecutorType.SIMPLE
executorType = executorType == null ? defaultExecutorType : executorType;
executorType = executorType == null ? ExecutorType.SIMPLE : executorType;
Executor executor;
if (ExecutorType.BATCH == executorType) {
executor = new BatchExecutor(this, transaction);
} else if (ExecutorType.REUSE == executorType) {
executor = new ReuseExecutor(this, transaction);
} else {
executor = new SimpleExecutor(this, transaction);
}
if (cacheEnabled) {
executor = new CachingExecutor(executor);
}
executor = (Executor) interceptorChain.pluginAll(executor);
return executor;
}
以ExecutorType.SIMPLE
为例, BatchExecutor
, ReuseExecutor
同理:
感谢各位的阅读,以上就是“MyBatis启动以及各种类的作用”的内容了,经过本文的学习后,相信大家对MyBatis启动以及各种类的作用这一问题有了更深刻的体会,具体使用情况还需要大家实践验证。这里是亿速云,小编将为大家推送更多相关知识点的文章,欢迎关注!
亿速云「云服务器」,即开即用、新一代英特尔至强铂金CPU、三副本存储NVMe SSD云盘,价格低至29元/月。点击查看>>
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。
原文链接:https://my.oschina.net/u/3516086/blog/3115670