这篇文章主要介绍“Docker+nacos+seata1.3.0安装与使用配置方法”，在日常操作中，相信很多人在Docker+nacos+seata1.3.0安装与使用配置方法问题上存在疑惑，小编查阅了各式资料，整理出简单好用的操作方法，希望对大家解答”Docker+nacos+seata1.3.0安装与使用配置方法”的疑惑有所帮助！接下来，请跟着小编一起来学习吧！
在此之前我搞了一天，虽然seata好用，用起来也超级简单，但是安装配置是真的麻烦，遇见了各种坑，下面来进入正题。o(╥﹏╥)o
注意：如果版本不匹配也会有各种报错，可以根据官网匹配版本。
seata：1.3.0 alibaba.cloud：2.2.3.RELEASE nacos：2.0.2
2.1 下载seata镜像
docker pull seataio/seata-server:1.3.0
2.2 在Linux目录下创建registry.conf，我的路径在/data/seate/registry.conf，接下来的所有创建都在这个目录下
cd /data mkdir seate vim registry.conf
2.3 registry.conf中的内容如下
registry {
type = "nacos"
nacos {
application = "seata-server"
serverAddr = "127.0.0.1:8848"
group = "SEATA_GROUP"
namespace = ""
cluster = "default"
username = ""
password = ""
}
}
config {
type = "nacos"
nacos {
serverAddr = "127.0.0.1:8848"
namespace = ""
group = "SEATA_GROUP"
username = ""
password = ""
}
}注意registry和config需要在同一个组下,注册中心我用的是nacos，注意nacos的地址要改。
----->>>这里我插一句，需要新建一个数据库seata，并且新建三张表，
-- -------------------------------- The script used when storeMode is 'db' -------------------------------- -- the table to store GlobalSession data CREATE TABLE IF NOT EXISTS `global_table` ( `xid` VARCHAR(128) NOT NULL, `transaction_id` BIGINT, `status` TINYINT NOT NULL, `application_id` VARCHAR(32), `transaction_service_group` VARCHAR(32), `transaction_name` VARCHAR(128), `timeout` INT, `begin_time` BIGINT, `application_data` VARCHAR(2000), `gmt_create` DATETIME, `gmt_modified` DATETIME, PRIMARY KEY (`xid`), KEY `idx_gmt_modified_status` (`gmt_modified`, `status`), KEY `idx_transaction_id` (`transaction_id`) ) ENGINE = InnoDB DEFAULT CHARSET = utf8; -- the table to store BranchSession data CREATE TABLE IF NOT EXISTS `branch_table` ( `branch_id` BIGINT NOT NULL, `xid` VARCHAR(128) NOT NULL, `transaction_id` BIGINT, `resource_group_id` VARCHAR(32), `resource_id` VARCHAR(256), `branch_type` VARCHAR(8), `status` TINYINT, `client_id` VARCHAR(64), `application_data` VARCHAR(2000), `gmt_create` DATETIME(6), `gmt_modified` DATETIME(6), PRIMARY KEY (`branch_id`), KEY `idx_xid` (`xid`) ) ENGINE = InnoDB DEFAULT CHARSET = utf8; -- the table to store lock data CREATE TABLE IF NOT EXISTS `lock_table` ( `row_key` VARCHAR(128) NOT NULL, `xid` VARCHAR(96), `transaction_id` BIGINT, `branch_id` BIGINT NOT NULL, `resource_id` VARCHAR(256), `table_name` VARCHAR(32), `pk` VARCHAR(36), `gmt_create` DATETIME, `gmt_modified` DATETIME, PRIMARY KEY (`row_key`), KEY `idx_branch_id` (`branch_id`) ) ENGINE = InnoDB DEFAULT CHARSET = utf8;
实现分布式每个业务库都要加一张表undo_log，不然会报错，
CREATE TABLE `undo_log` ( `id` bigint(20) NOT NULL AUTO_INCREMENT COMMENT '主键', `branch_id` bigint(20) NOT NULL COMMENT 'branch transaction id', `xid` varchar(100) NOT NULL COMMENT 'global transaction id', `context` varchar(128) NOT NULL COMMENT 'undo_log context,such as serialization', `rollback_info` longblob NOT NULL COMMENT 'rollback info', `log_status` int(11) NOT NULL COMMENT '0:normal status,1:defense status', `log_created` datetime(6) NOT NULL COMMENT 'create datetime', `log_modified` datetime(6) NOT NULL COMMENT 'modify datetime', PRIMARY KEY (`id`), UNIQUE KEY `ux_undo_log` (`xid`,`branch_id`) ) ENGINE=InnoDB AUTO_INCREMENT=9 DEFAULT CHARSET=utf8 COMMENT='AT transaction mode undo table';
2.4 创建推送配置文件 vim config.txt，是将文件中的配置推送到nacos中去。
vim config.txt
service.vgroupMapping.btb_tx_group=default store.mode=db store.db.datasource=druid store.db.dbType=mysql store.db.driverClassName=com.mysql.cj.jdbc.Driver store.db.url=jdbc:mysql://172.0.0.1:3306/seata?useUnicode=true store.db.user=root store.db.password=root store.db.minConn=5 store.db.maxConn=30 store.db.globalTable=global_table store.db.branchTable=branch_table store.db.queryLimit=100 store.db.lockTable=lock_table store.db.maxWait=5000
注意btb_tx_group需要与客户端保持一致,顺便注意数据库驱动，如果是8以上用我的这个驱动，5.7的用com.mysql.jdbc.Driver
2.5 创建推送脚本，因为执行脚本要在config.txt的下一层，所有加一层目录
mkdir sh cd sh vim nacos-config.sh
内容如下：最好不要有任何的修改
#!/usr/bin/env bash
# Copyright 1999-2019 Seata.io Group.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at、
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
while getopts ":h:p:g:t:u:w:" opt
do
case $opt in
h)
host=$OPTARG
;;
p)
port=$OPTARG
;;
g)
group=$OPTARG
;;
t)
tenant=$OPTARG
;;
u)
username=$OPTARG
;;
w)
password=$OPTARG
;;
?)
echo " USAGE OPTION: $0 [-h host] [-p port] [-g group] [-t tenant] [-u username] [-w password] "
exit 1
;;
esac
done
if [[ -z ${host} ]]; then
host=localhost
fi
if [[ -z ${port} ]]; then
port=8848
fi
if [[ -z ${group} ]]; then
group="SEATA_GROUP"
fi
if [[ -z ${tenant} ]]; then
tenant=""
fi
if [[ -z ${username} ]]; then
username=""
fi
if [[ -z ${password} ]]; then
password=""
fi
nacosAddr=$host:$port
contentType="content-type:application/json;charset=UTF-8"
echo "set nacosAddr=$nacosAddr"
echo "set group=$group"
failCount=0
tempLog=$(mktemp -u)
function addConfig() {
curl -X POST -H "${contentType}" "http://$nacosAddr/nacos/v1/cs/configs?dataId=$1&group=$group&content=$2&tenant=$tenant&username=$username&password=$password" >"${tempLog}" 2>/dev/null
if [[ -z $(cat "${tempLog}") ]]; then
echo " Please check the cluster status. "
exit 1
fi
if [[ $(cat "${tempLog}") =~ "true" ]]; then
echo "Set $1=$2 successfully "
else
echo "Set $1=$2 failure "
(( failCount++ ))
fi
}
count=0
for line in $(cat $(dirname "$PWD")/config.txt | sed s/[[:space:]]//g); do
(( count++ ))
key=${line%%=*}
value=${line#*=}
addConfig "${key}" "${value}"
done
echo "========================================================================="
echo " Complete initialization parameters, total-count:$count , failure-count:$failCount "
echo "========================================================================="
if [[ ${failCount} -eq 0 ]]; then
echo " Init nacos config finished, please start seata-server. "
else
echo " init nacos config fail. "
fi2.6 执行推送脚本，后面是nacos的ip地址，如果端口不是8848还需要加一个-p 8884你的端口
bash nacos-config.sh -h 127.0.0.1
2.7 创建容器，注意SEATA_IP如果是阿里云服务器需要写外网ip
docker run -d --restart always --name seata-server -p 8091:8091 -e SEATA_IP=172.0.0.1 -e SEATA_CONFIG_NAME=file:/data/seata/registry -v /data/seata:/data/seata seataio/seata-server:1.3.0
3.1 pom.xml 引入依赖
<!-- seata分布式事务--> <dependency> <groupId>com.alibaba.cloud</groupId> <artifactId>spring-cloud-starter-alibaba-seata</artifactId> <exclusions> <exclusion> <groupId>io.seata</groupId> <artifactId>seata-spring-boot-starter</artifactId> </exclusion> </exclusions> </dependency> <dependency> <groupId>io.seata</groupId> <artifactId>seata-spring-boot-starter</artifactId> <version>1.3.0</version> </dependency>
注意这里一定要剔除原来自带的 io.seata包，并且服务端和客户端的包版本要一致。
3.2 配置项目配置文件
#seata
seata.application-id=${spring.application.name}
seata.tx-service-group=btb_tx_group
seata.config.type=nacos
seata.config.nacos.server-addr=172.0.0.1:8848
seata.config.nacos.group=SEATA_GROUP
seata.registry.type=nacos
seata.registry.nacos.application=seata-server
seata.registry.nacos.server-addr=172.0.0.1:8848
seata.registry.nacos.group=SEATA_GROUP注意：这里的btb_tx_group要跟服务端的vgroupMapping后面的key保持一致，
如：service.vgroupMapping.btb_tx_group=default
3.3 加入注解使用
@GlobalTransactional
扩展： 我用的是一个数据库，执行报错，说我缺少主键，于是我在表undo_log加了一个增的主键id，上面的创建undo_log表的sql是我加了id的，官方给的是没有id的。请知晓！！！！
问题：单数源是有报错的，原因是因为我是一个数据库，需要设置代理配置如下 ，根据自己实际情况是指配置文件，不然会报错
#单数据源 seata.enable-auto-data-source-proxy=true #多数据源 seata.enable-auto-data-source-proxy=false
到此，关于“Docker+nacos+seata1.3.0安装与使用配置方法”的学习就结束了，希望能够解决大家的疑惑。理论与实践的搭配能更好的帮助大家学习，快去试试吧！若想继续学习更多相关知识，请继续关注亿速云网站，小编会继续努力为大家带来更多实用的文章！
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
