这篇文章主要讲解了“怎么用python编写adb截图工具”,文中的讲解内容简单清晰,易于学习与理解,下面请大家跟着小编的思路慢慢深入,一起来研究和学习“怎么用python编写adb截图工具”吧!
一、 功能
二、使用说明
三、实现
1.初始源码
2.优化:增加ip连接断开重连处理
Android端或者Android终端的远程截图至本地电脑中
1.adb截图工具可用于Android手机及Android终端
2.使用数据线连接前提:电脑与Android终端/手机已连接
Android终端/手机已打开开发者模式
3.生成的图片格式为png
import time
import os,sys
#截图
def screencap_cmd(filePath,devices=None):
if filePath==None:
filePath='D:/png/'
if not os.path.exists(filePath):
os.makedirs(filePath)
filename=time.strftime("%Y%m%d%H%M%S",time.localtime())+".png"
if devices==None:
cmd_screencap='adb shell screencap -p sdcard/'+filename
cmd_pull='adb pull sdcard/'+filename+' '+filePath+filename
cmd_delete='adb shell rm sdcard/'+filename
else:
cmd_screencap='adb -s '+devices+' shell screencap -p sdcard/'+filename
cmd_pull='adb -s '+devices+' pull sdcard/'+filename+' '+filePath+filename
cmd_delete='adb -s '+devices+' shell rm sdcard/'+filename
os.system(cmd_screencap)
os.system(cmd_pull)
os.system(cmd_delete)
#保存地址判断及设备信息分类调用
def screencap_info(devices=None,filePath=None):
if filePath==None:
filePath='D:/png/'
if not os.path.exists(filePath):
os.makedirs(filePath)
if devices==None:
screencap_cmd(filePath)
adb_device_none(filePath)
else:
screencap_cmd(filePath,devices)
adb_info(devices,filePath)
#更换设备
def change_devices():
r=os.popen("adb devices")
lines=r.readlines()
lines=lines[1:-1]
n=len(lines)
for i in lines:
print(i.split("\t")[0])
devices=input("请输入指定设备:\n")
for i in lines:
if devices in i:
return devices
print("未找到改设备请重新输入!")
change_devices()
#截图命令判断,电脑连接多个设备或使用IP截图时
def adb_info(lines,filePath=None):
s=input("是否截图(T/F/N)?\n")
if s=='t' or s=='T':
if filePath==None:
screencap_info(lines)
else:
screencap_info(lines,filePath)
elif s=='N' or s=='n' or s=='exit':
sys.exit()
elif s=='F' or s=='f':
devices=change_devices()
if filePath==None:
adb_info(devices)
else:
adb_info(devices,filePath)
#截图命令判断,电脑连接仅连接一个设备时
def adb_device_none(filePath=None):
s=input("是否截图(T/F/N)?\n")
if s=='t' or s=='T':
if filePath==None:
screencap_info()
else:
screencap_info(None,filePath)
elif s=='N' or s=='n' or s=='exit':
sys.exit()
elif s=='F' or s=='f':
devices=change_devices()
if filePath==None:
adb_info(devices)
else:
adb_info(devices,filePath)
#使用设备判断
def adb_devices(n,lines,filePath=None):
if n==0:
print("请检查是否已接连或启动调试模式或安装adb环境")
s=input("再次启动(T/F)?\n")
if s=='t' or s=='T':
r=os.popen("adb devices")
lines=r.readlines()
lines=lines[1:-1]
n=len(lines)
adb_devices(n,r.readlines())
else:
sys.exit()
elif ":5555" in lines:
print("T:截图 F:更换设备 exit|N:退出 ")
if filePath==None:
adb_info(lines)
else:
adb_info(lines,filePath)
elif n==1:
print("T:截图 F:更换设备 exit|N:退出")
if filePath==None:
adb_device_none()
else:
adb_device_none(filePath)
elif n>1:
for i in lines:
print(i.split("\t")[0])
devices=input("请输入指定设备:\n")
for i in lines:
if devices in i:
print("T:截图 F:更换设备 exit|N:退出")
if filePath==None:
adb_info(devices)
else:
adb_info(devices,filePath)
print("未找到改设备请重新输入!")
if filePath==None:
adb_devices(n,lines)
else:
adb_devices(n,lines,filePath)
#输入IP
def ip_info():
ipPath=input("请输入IP:(不输入enter跳过默认使用数据线连接)\n")
if len(ipPath)>0:
try:
cnd='adb connect '+ipPath
os.system(cnd)
return ipPath
except:
print("ADB调试模式为USB,需要切换到无线调试模式\n")
print("切换方法:\n第一步:Android设备开启USB调试,并且通过USB线连接到电脑\n第二步:在终端执行以下命令”adb tcpip 5555“\n第三步:在终端执行以下命令”adb connect ip“。此时拔出USB线,应该就可以adb通过wifi调试设备\n")
return ip_info()
if __name__ == '__main__':
ipPath=ip_info()
filePath=input("请输入保存地址:(不输入enter跳过,默认保存至D:\png\)\n")
#查询当前连接的设备
r=os.popen("adb devices")
lines=r.readlines()
lines=lines[1:-1]
n=len(lines)
ip_add=0
if ipPath!=None:
for i in lines:
if ipPath in i:
ip_add=i.split("\t")[0]
if len(filePath)>0:
if ":\\" in filePath:
if ip_add!=0:
adb_devices(n,ip_add,filePath)
else:
adb_devices(n,lines,filePath)
else:
print("地址输入非法,使用默认地址\n")
if ip_add!=0:
adb_devices(n,ip_add)
else:
adb_devices(n,lines)
else:
if ip_add!=0:
adb_devices(n,ip_add)
else:
adb_devices(n,lines)
在输入ip函数ip_info()增加ip连接判断,将os.system替换成os.popen函数执行cmd命令:
r=os.popen(cnd)
#读取执行结果
lines=r.readlines()[0]
if 'unable' in lines:
print("连接失败\n")
return ip_info()
else:
return ipPath
os.system函数无法获取执行结果,只能获取执行成功或失败的结果,成功返回0,失败返回1,且会执行的结果打印在终端上,相当于调起dos执行命令
os.popen函数可获取执行的结果内容,但获取的结果要进行readlines读取,执行的结果不会打印在终端上
在输入ip函数ip_info()增加ip连接判断,将os.system替换成os.popen函数执行cmd命令:
a=os.system(cmd_screencap)
if a==0:
os.system(cmd_pull)
os.system(cmd_delete)
else:
if ":5555" in devices:
print("连接断开,请重新连接\n")
ipPath=ip_info()
if ipPath==None:
ipPath=ip_info()
else:
device=ipPath+":5555"
adb_info(device,filePath)
else:
print("设备连接断开,请更换设备\n")
device=change_devices()
adb_info(device,filePath)
3.最终源码
import time
import os,sys
#输入IP
def ip_info():
ipPath=input("请输入IP:(不输入enter跳过默认使用数据线连接)\n")
if len(ipPath)>0:
try:
cnd='adb connect '+ipPath
r=os.popen(cnd)
lines=r.readlines()[0]
if 'unable' in lines:
print("连接失败\n")
return ip_info()
else:
return ipPath
except:
print("ADB调试模式为USB,需要切换到无线调试模式\n")
print("切换方法:\n第一步:Android设备开启USB调试,并且通过USB线连接到电脑\n第二步:在终端执行以下命令”adb tcpip 5555“\n第三步:在终端执行以下命令”adb connect ip“。此时拔出USB线,应该就可以adb通过wifi调试设备\n")
return ip_info()
#保存地址判断及设备信息分类调用
def screencap_info(devices=None,filePath=None):
if filePath==None:
filePath='D:/png/'
if not os.path.exists(filePath):
os.makedirs(filePath)
if devices==None:
screencap_cmd(filePath)
adb_device_none(filePath)
else:
screencap_cmd(filePath,devices)
adb_info(devices,filePath)
#更换设备
def change_devices():
r=os.popen("adb devices")
lines=r.readlines()
lines=lines[1:-1]
n=len(lines)
for i in lines:
print(i.split("\t")[0])
devices=input("请输入指定设备:\n")
for i in lines:
if devices in i:
return devices
print("未找到改设备请重新输入!\n")
change_devices()
#截图命令判断,电脑连接多个设备或使用IP截图时
def adb_info(lines,filePath=None):
s=input("是否截图(T/F/N)?\n")
if s=='t' or s=='T':
if filePath==None:
screencap_info(lines)
else:
screencap_info(lines,filePath)
elif s=='N' or s=='n' or s=='exit':
sys.exit()
elif s=='F' or s=='f':
devices=change_devices()
if filePath==None:
adb_info(devices)
else:
adb_info(devices,filePath)
#截图命令判断,电脑连接仅连接一个设备时
def adb_device_none(filePath=None):
s=input("是否截图(T/F/N)?\n")
if s=='t' or s=='T':
if filePath==None:
screencap_info()
else:
screencap_info(None,filePath)
elif s=='N' or s=='n' or s=='exit':
sys.exit()
elif s=='F' or s=='f':
devices=change_devices()
if filePath==None:
adb_info(devices)
else:
adb_info(devices,filePath)
#使用设备判断
def adb_devices(n,lines,filePath=None):
if n==0:
print("请检查是否已接连或启动调试模式或安装adb环境\n")
s=input("再次启动(T/F)?\n")
if s=='t' or s=='T':
r=os.popen("adb devices")
lines=r.readlines()
lines=lines[1:-1]
n=len(lines)
adb_devices(n,r.readlines())
else:
sys.exit()
elif ":5555" in lines:
print("T:截图 F:更换设备 exit|N:退出\n")
if filePath==None:
adb_info(lines)
else:
adb_info(lines,filePath)
elif n==1:
print("T:截图 F:更换设备 exit|N:退出\n")
if filePath==None:
adb_device_none()
else:
adb_device_none(filePath)
elif n>1:
for i in lines:
print(i.split("\t")[0])
devices=input("请输入指定设备:\n")
for i in lines:
if devices in i:
print("T:截图 F:更换设备 exit|N:退出")
if filePath==None:
adb_info(devices)
else:
adb_info(devices,filePath)
print("未找到改设备请重新输入!")
if filePath==None:
adb_devices(n,lines)
else:
adb_devices(n,lines,filePath)
#截图
def screencap_cmd(filePath,devices=None):
if filePath==None:
filePath='D:/png/'
if not os.path.exists(filePath):
os.makedirs(filePath)
filename=time.strftime("%Y%m%d%H%M%S",time.localtime())+".png"
if devices==None:
cmd_screencap='adb shell screencap -p sdcard/'+filename
cmd_pull='adb pull sdcard/'+filename+' '+filePath+filename
cmd_delete='adb shell rm sdcard/'+filename
else:
cmd_screencap='adb -s '+devices+' shell screencap -p sdcard/'+filename
cmd_pull='adb -s '+devices+' pull sdcard/'+filename+' '+filePath+filename
cmd_delete='adb -s '+devices+' shell rm sdcard/'+filename
a=os.system(cmd_screencap)
if a==0:
os.system(cmd_pull)
os.system(cmd_delete)
else:
if ":5555" in devices:
print("连接断开,请重新连接\n")
ipPath=ip_info()
if ipPath==None:
ipPath=ip_info()
else:
device=ipPath+":5555"
adb_info(device,filePath)
else:
print("设备连接断开,请更换设备\n")
device=change_devices()
adb_info(device,filePath)
if __name__ == '__main__':
ipPath=ip_info()
filePath=input("请输入保存地址:(不输入enter跳过,默认保存至D:\png\)\n")
#查询当前连接的设备
r=os.popen("adb devices")
lines=r.readlines()
lines=lines[1:-1]
n=len(lines)
ip_add=0
if ipPath!=None:
for i in lines:
if ipPath in i:
ip_add=i.split("\t")[0]
if len(filePath)>0:
if ":\\" in filePath:
if ip_add!=0:
adb_devices(n,ip_add,filePath)
else:
adb_devices(n,lines,filePath)
else:
print("地址输入非法,使用默认地址\n")
if ip_add!=0:
adb_devices(n,ip_add)
else:
adb_devices(n,lines)
else:
if ip_add!=0:
adb_devices(n,ip_add)
else:
adb_devices(n,lines)
感谢各位的阅读,以上就是“怎么用python编写adb截图工具”的内容了,经过本文的学习后,相信大家对怎么用python编写adb截图工具这一问题有了更深刻的体会,具体使用情况还需要大家实践验证。这里是亿速云,小编将为大家推送更多相关知识点的文章,欢迎关注!
亿速云「云服务器」,即开即用、新一代英特尔至强铂金CPU、三副本存储NVMe SSD云盘,价格低至29元/月。点击查看>>
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。