1.服务器端环境准备 yum update chkconfig iptables off chkconfig ip6tables off vi /etc/sysconfig/selinux SELINUX=disabled rpm -i http://mirrors.ustc.edu.cn/fedora/epel/6/x86_64/epel-release-6-7.noarch.rpm rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-* 2.软件安装 yum install nagios nagios-plugins nagios-plugins-all nagios-plugins-nrpe php php-pear mod_ssl net-snmp net-snmp-utils sendmail htpasswd /etc/nagios/passwd nagiosadmin nagios -v /etc/nagios/nagios.cfg usermod -a -G nagios apache chkconfig nagios on chkconfig httpd on chkconfig sendmail on service sendmail restart service httpd restart
3.配置
vim /etc/nagios/nagios.cfg cfg_dir= /etc/nagios/servers vim /etc/nagios/objects/commands.cfg define command{ command_name check_nrpe command_line /usr/lib64/nagios/plugins/check_nrpe -H $HOSTADDRESS$ -c $ARG1$ } mkdir /etc/nagios/servers chown root:nagios /etc/nagios/servers service nagios restart
4.客户端软件安装
yum install nagios-plugins-nrpe nagios-plugins-all nagios-nrpe openssl
5.监控路由器
cisco2811(config)# snmp-server community gnet RO cisco2811(config)# snmp-server host 192.168.0.7 gnet cisco2811(config)# snmp-server enable traps
添加监控路由器的nagios端配置文件 efine host{ use generic-switch ; Inherit default values from a template host_name cisco2811 ; The name we're giving to this switch alias cisco2811 ; A longer name associated with the switch address 192.168.1.1 ; IP address of the switch hostgroups routers ; Host groups this switch is associated with } define hostgroup{ hostgroup_name routers ; The name of the hostgroup alias Network router ; Long name of the group } define service{ use generic-service ; Inherit values from a template host_name cisco2811 ; The name of the host the service is associated with service_description PING ; The service description check_command check_ping!200.0,20%!600.0,60% ; The command used to monitor the service normal_check_interval 5 ; Check the service every 5 minutes under normal conditions retry_check_interval 1 ; Re-check the service every minute until its final/hard state is determined } define service{ use generic-service ; Inherit values from a template host_name cisco2811 service_description Uptime check_command check_snmp_time! -C gnet -o sysUpTime.0 } # Monitor Port 1 status via SNMP define service{ use generic-service ; Inherit values from a template host_name cisco2811 service_description Port 1 Link Status check_command check_snmp_time! -C gnet -o ifOperStatus.1 -r 1 -m RFC1213-MIB } define service{ use generic-service host_name cisco2811 service_description CPU is_volatile 0 check_period 24x7 max_check_attempts 3 retry_check_interval 1 contact_groups admins notification_interval 120 notification_period 24x7 check_command check_cisco_cpu!gnet!60!69!70!80 }
6被监控端nrpe配置
yum install nagios-plugins-nrpe nagios-plugins-all nagios-nrpe openssl vim /etc/nagios/nrpe.cfg allowed_hosts=127.0.0.1,192.168.0.7 chown nrpe:nrpe /etc/nagios/nrpe.cfg vim /etc/services nrpe 5666/tcp # NRPE chkconfig nrpe on
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。