找出AIX的WWN号,
hscroot@localhost:~> vtmenu
----------------------------------------------------------
Managed Systems:
----------------------------------------------------------
1) Server-9179-MHB-SN06F53ER
2) Server-9179-MHB-SN06F53AR
Enter Number of Managed System. (q to quit): 2
----------------------------------------------------------
Partitions On Managed System: Server-9179-MHB-SN06F53AR
OS/400 Partitions not listed
----------------------------------------------------------
1) ffjz-a Not Activated
2) js-gshx-dg-a Running
3) js-hxcx-dg-a-swhxcx Running
4) js-hxzg-dg-a Running
5) js-jcpt-dg-a Running
6) js-sky-dg-a Running
7) p780-sc-a Running
Enter Number of Running Partition (q to quit): 4
AIX Version 7
Copyright IBM Corporation, 1982, 2015.
Console login: root
root's Password:
*******************************************************************************
* *
* *
* Welcome to AIX Version 7.1! *
* *
* *
* Please see the README file in /usr/lpp/bos for information pertinent to *
* this release of the AIX Operating System. *
* *
* *
*******************************************************************************
Last unsuccessful login: Fri Jul 20 13:37:31 CST 2012 on ssh from 80.12.73.51
Last login: Sat Jul 21 13:20:55 CST 2012 on /dev/pts/0 from 80.12.131.105
js-hxzg-dg-a#lsdev -Cc adapter
ent0 Available 04-00 2-Port Gigabit Ethernet-SX PCI-Express Adapter (14103f03)
ent1 Available 04-01 2-Port Gigabit Ethernet-SX PCI-Express Adapter (14103f03)
ent2 Available 06-00 2-Port Gigabit Ethernet-SX PCI-Express Adapter (14103f03)
ent3 Available 06-01 2-Port Gigabit Ethernet-SX PCI-Express Adapter (14103f03)
ent4 Available 00-00-00 10 Gigabit Ethernet Adapter (ct3)
ent5 Available 01-00-00 10 Gigabit Ethernet Adapter (ct3)
ent6 Available EtherChannel / IEEE 802.3ad Link Aggregation
ent7 Available EtherChannel / IEEE 802.3ad Link Aggregation
fcs0 Available 02-00 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs1 Available 02-01 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs2 Available 03-00 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs3 Available 03-01 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs4 Available 07-00 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
fcs5 Available 07-01 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
hba0 Available 00-00 10 Gigabit Ethernet-SR PCI-Express Host Bus Adapter (2514300014108c03)
hba1 Available 01-00 10 Gigabit Ethernet-SR PCI-Express Host Bus Adapter (2514300014108c03)
pkcs11 Available ACF/PKCS#11 Device
sissas0 Available 05-00 PCI Express x8 Planar 3Gb SAS Adapter
sissas1 Defined 08-00 PCI Express x8 Ext Dual-x4 3Gb SAS Adapter
vsa0 Available LPAR Virtual Serial Adapter
js-hxzg-dg-a#lscfg -vpl fcs*
fcs4 U78C0.001.DBJ5582-P2-C5-T1 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
Part Number.................00E0806
Serial Number...............1A23500B93
Manufacturer................001A
EC Level.................... D77161
Customer Card ID Number.....577D
FRU Number..................00E0806
Device Specific.(ZM)........3
Network Address.............10000090FA0D47A2
ROS Level and ID............02782037
Device Specific.(Z0)........31004549
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........09030909
Device Specific.(Z4)........FF781150
Device Specific.(Z5)........02782037
Device Specific.(Z6)........07732037
Device Specific.(Z7)........0B7C2037
Device Specific.(Z8)........20000120FA0D47A2
Device Specific.(Z9)........US2.00X7
Device Specific.(ZA)........U2D2.00X7
Device Specific.(ZB)........U3K2.00X7
Device Specific.(ZC)........00000000
Hardware Location Code......U78C0.001.DBJ5582-P2-C5-T1
fcs5 U78C0.001.DBJ5582-P2-C5-T2 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
Part Number.................00E0806
Serial Number...............1A23500B93
Manufacturer................001A
EC Level.................... D77161
Customer Card ID Number.....577D
FRU Number..................00E0806
Device Specific.(ZM)........3
Network Address.............10000090FA0D47A3
ROS Level and ID............02782037
Device Specific.(Z0)........31004549
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........09030909
Device Specific.(Z4)........FF781150
Device Specific.(Z5)........02782037
Device Specific.(Z6)........07732037
Device Specific.(Z7)........0B7C2037
Device Specific.(Z8)........20000120FA0D47A3
Device Specific.(Z9)........US2.00X7
Device Specific.(ZA)........U2D2.00X7
Device Specific.(ZB)........U3K2.00X7
Device Specific.(ZC)........00000000
Hardware Location Code......U78C0.001.DBJ5582-P2-C5-T2
fcs2 U78C0.001.DBJ5485-P2-C2-T1 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
Part Number.................00E0806
Serial Number...............1A23400655
Manufacturer................001A
EC Level.................... D77161
Customer Card ID Number.....577D
FRU Number..................00E0806
Device Specific.(ZM)........3
Network Address.............10000090FA08D03C
ROS Level and ID............02782037
Device Specific.(Z0)........31004549
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........09030909
Device Specific.(Z4)........FF781150
Device Specific.(Z5)........02782037
Device Specific.(Z6)........07732037
Device Specific.(Z7)........0B7C2037
Device Specific.(Z8)........20000120FA08D03C
Device Specific.(Z9)........US2.00X7
Device Specific.(ZA)........U2D2.00X7
Device Specific.(ZB)........U3K2.00X7
Device Specific.(ZC)........00000000
Hardware Location Code......U78C0.001.DBJ5485-P2-C2-T1
fcs3 U78C0.001.DBJ5485-P2-C2-T2 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
Part Number.................00E0806
Serial Number...............1A23400655
Manufacturer................001A
EC Level.................... D77161
Customer Card ID Number.....577D
FRU Number..................00E0806
Device Specific.(ZM)........3
Network Address.............10000090FA08D03D
ROS Level and ID............02782037
Device Specific.(Z0)........31004549
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........09030909
Device Specific.(Z4)........FF781150
Device Specific.(Z5)........02782037
Device Specific.(Z6)........07732037
Device Specific.(Z7)........0B7C2037
Device Specific.(Z8)........20000120FA08D03D
Device Specific.(Z9)........US2.00X7
Device Specific.(ZA)........U2D2.00X7
Device Specific.(ZB)........U3K2.00X7
Device Specific.(ZC)........00000000
Hardware Location Code......U78C0.001.DBJ5485-P2-C2-T2
fcs0 U78C0.001.DBJ5485-P2-C1-T1 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
Part Number.................00E0806
Serial Number...............1A23400838
Manufacturer................001A
EC Level.................... D77161
Customer Card ID Number.....577D
FRU Number..................00E0806
Device Specific.(ZM)........3
Network Address.............10000090FA08DCEA
ROS Level and ID............02782037
Device Specific.(Z0)........31004549
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........09030909
Device Specific.(Z4)........FF781150
Device Specific.(Z5)........02782037
Device Specific.(Z6)........07732037
Device Specific.(Z7)........0B7C2037
Device Specific.(Z8)........20000120FA08DCEA
Device Specific.(Z9)........US2.00X7
Device Specific.(ZA)........U2D2.00X7
Device Specific.(ZB)........U3K2.00X7
Device Specific.(ZC)........00000000
Hardware Location Code......U78C0.001.DBJ5485-P2-C1-T1
fcs1 U78C0.001.DBJ5485-P2-C1-T2 8Gb PCI Express Dual Port FC Adapter (df1000f114108a03)
Part Number.................00E0806
Serial Number...............1A23400838
Manufacturer................001A
EC Level.................... D77161
Customer Card ID Number.....577D
FRU Number..................00E0806
Device Specific.(ZM)........3
Network Address.............10000090FA08DCEB
ROS Level and ID............02782037
Device Specific.(Z0)........31004549
Device Specific.(Z1)........00000000
Device Specific.(Z2)........00000000
Device Specific.(Z3)........09030909
Device Specific.(Z4)........FF781150
Device Specific.(Z5)........02782037
Device Specific.(Z6)........07732037
Device Specific.(Z7)........0B7C2037
Device Specific.(Z8)........20000120FA08DCEB
Device Specific.(Z9)........US2.00X7
Device Specific.(ZA)........U2D2.00X7
Device Specific.(ZB)........U3K2.00X7
Device Specific.(ZC)........00000000
Hardware Location Code......U78C0.001.DBJ5485-P2-C1-T2
PLATFORM SPECIFIC
Name: fibre-channel
Model: 00E0806
Node: fibre-channel@0
Device Type: fcp
Physical Location: U78C0.001.DBJ5485-P2-C1-T1
Name: fibre-channel
Model: 00E0806
Node: fibre-channel@0,1
Device Type: fcp
Physical Location: U78C0.001.DBJ5485-P2-C1-T2
Name: fibre-channel
Model: 00E0806
Node: fibre-channel@0
Device Type: fcp
Physical Location: U78C0.001.DBJ5485-P2-C2-T1
Name: fibre-channel
Model: 00E0806
Node: fibre-channel@0,1
Device Type: fcp
Physical Location: U78C0.001.DBJ5485-P2-C2-T2
Name: fibre-channel
Model: 00E0806
Node: fibre-channel@0
Device Type: fcp
Physical Location: U78C0.001.DBJ5582-P2-C5-T1
Name: fibre-channel
Model: 00E0806
Node: fibre-channel@0,1
Device Type: fcp
Physical Location: U78C0.001.DBJ5582-P2-C5-T2
找出LINUX的WWN号:
[root@localhost ~]# cat /sys/class/fc_host/host1/port_name
0x21000024ff11bc40
[root@localhost ~]# cat /sys/class/fc_host/host2/port_name
0x21000024ff91df9a
[root@localhost ~]# cat /sys/class/fc_host/host3/port_name
0x21000024ff91df9b
[root@localhost ~]# cat /sys/class/fc_host/host4/port_name
0x21000024ff91df94
[root@localhost ~]# cat /sys/class/fc_host/host5/port_name
0x21000024ff91df95
2. 在交换机上找到每个主机的WWN号,WWN做双链路,每个交换机上会有各一个对于的WWN号
SNS5384_1:FID128:admin> switchshow |grep "47:a2"
301 3 45 33a5c0 id N8 Online FC F-Port 10:00:00:90:fa:0d:47:a2
SNS5384_2:FID128:admin> switchshow |grep "ea"
switchBeacon: OFF
302 3 46 34a6c0 id N8 Online FC F-Port 10:00:00:90:fa:08:dc:ea
3. 然后跟华为存储的存储启动器,划zone
在SNS5384_1上把华为存储的启动器四个启动器
20:09:00:2e:c7:43:e3:01
20:19:00:2e:c7:43:e3:01
20:29:00:2e:c7:43:e3:01
20:39:00:2e:c7:43:e3:01跟主机的fcs4划zone
SNS5384_1:FID128:admin> switchshow |grep "47:a2"
301 3 45 33a5c0 id N8 Online FC F-Port 10:00:00:90:fa:0d:47:a2
SNS5384_1:FID128:admin> zonecreate "HW18500V3_B_A_R1_P1_aix_fwskcx_fcs4","20:09:00:2e:c7:43:e3:01;10:00:00:90:fa:0d:47:a2"
SNS5384_1:FID128:admin> zonecreate "HW18500V3_B_B_L1_P1_aix_fwskcx_fcs4","20:19:00:2e:c7:43:e3:01;10:00:00:90:fa:0d:47:a2"
SNS5384_1:FID128:admin> zonecreate "HW18500V3_B_C_R1_P1_aix_fwskcx_fcs4","20:29:00:2e:c7:43:e3:01;10:00:00:90:fa:0d:47:a2"
SNS5384_1:FID128:admin> zonecreate "HW18500V3_B_D_L1_P1_aix_fwskcx_fcs4","20:39:00:2e:c7:43:e3:01;10:00:00:90:fa:0d:47:a2"
SNS5384_1:FID128:admin> cfgadd "cfg01","HW18500V3_B_A_R1_P1_aix_fwskcx_fcs4;HW18500V3_B_B_L1_P1_aix_fwskcx_fcs4;HW18500V3_B_C_R1_P1_aix_fwskcx_fcs4;HW18500V3_B_D_L1_P1_aix_fwskcx_fcs4"
SNS5384_1:FID128:admin> cfgsave
WARNING!!!
The changes you are attempting to save will render the
Effective configuration and the Defined configuration
inconsistent. The inconsistency will result in different
Effective Zoning configurations for switches in the fabric if
a zone merge or HA failover happens. To avoid inconsistency
it is recommended to commit the configurations using the
'cfgenable' command.
Do you want to proceed with saving the Defined
zoning configuration only? (yes, y, no, n): [no] y
Updating flash ...
SNS5384_1:FID128:admin> cfgenable "cfg01"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'cfg01' configuration (yes, y, no, n): [no] y
zone config "cfg01" is in effect
Updating flash ...
在SNS5384_2上把华为存储的启动器四个启动器
20:08:00:2e:c7:43:e3:01
20:08:00:2e:c7:43:e3:01
20:08:00:2e:c7:43:e3:01
20:08:00:2e:c7:43:e3:01跟主机的fcs0划zone
SNS5384_2:FID128:admin> switchshow |grep "ea"
switchBeacon: OFF
302 3 46 34a6c0 id N8 Online FC F-Port 10:00:00:90:fa:08:dc:ea
SNS5384_2:FID128:admin> zonecreate "HW18500V3_B_A_R1_P0_aix_fwskcx_fcs0","20:08:00:2e:c7:43:e3:01;10:00:00:90:fa:08:dc:ea"
SNS5384_2:FID128:admin> zonecreate "HW18500V3_B_B_L1_P0_aix_fwskcx_fcs0","20:18:00:2e:c7:43:e3:01;10:00:00:90:fa:08:dc:ea"
SNS5384_2:FID128:admin> zonecreate "HW18500V3_B_C_R1_P0_aix_fwskcx_fcs0","20:28:00:2e:c7:43:e3:01;10:00:00:90:fa:08:dc:ea"
SNS5384_2:FID128:admin> zonecreate "HW18500V3_B_D_L1_P0_aix_fwskcx_fcs0","20:38:00:2e:c7:43:e3:01;10:00:00:90:fa:08:dc:ea"
SNS5384_2:FID128:admin> cfgadd "cfg01","HW18500V3_B_A_R1_P0_aix_fwskcx_fcs0;HW18500V3_B_B_L1_P0_aix_fwskcx_fcs0;HW18500V3_B_C_R1_P0_aix_fwskcx_fcs0;HW18500V3_B_D_L1_P0_aix_fwskcx_fcs0"
SNS5384_2:FID128:admin> cfgsave
WARNING!!!
The changes you are attempting to save will render the
Effective configuration and the Defined configuration
inconsistent. The inconsistency will result in different
Effective Zoning configurations for switches in the fabric if
a zone merge or HA failover happens. To avoid inconsistency
it is recommended to commit the configurations using the
'cfgenable' command.
Do you want to proceed with saving the Defined
zoning configuration only? (yes, y, no, n): [no] y
Updating flash ...
SNS5384_2:FID128:admin> cfgenable "cfg01"
You are about to enable a new zoning configuration.
This action will replace the old zoning configuration with the
current configuration selected. If the update includes changes
to one or more traffic isolation zones, the update may result in
localized disruption to traffic on ports associated with
the traffic isolation zone changes
Do you want to enable 'cfg01' configuration (yes, y, no, n): [no] y
zone config "cfg01" is in effect
Updating flash ...
最后一步需要在主机上 cfgmgr,或者LINUX 扫描硬件
4. AIX安装华为多路径流程:
下载地址: https://share.weiyun.com/58lOzi6
js-hxzg-dg-a#chmod +x unzip
js-hxzg-dg-a#./unzip OceanStor_UltraPath_21.1.0_AIX.zip
Archive: OceanStor_UltraPath_21.1.0_AIX.zip
creating: AIX/
creating: AIX/Docs/
inflating: AIX/Docs/Open Source Software Notice.doc
inflating: AIX/install.tar
creating: AIX/Packages/
inflating: AIX/Packages/UltraPath-8.01.2102.0048.AIX.ppc_64.install.bff
creating: AIX/Packages/Update/
inflating: AIX/Packages/Update/UltraPath-8.01.2102.0048.AIX.ppc_64.ndu.bff
inflating: AIX/Packages/Update/UltraPath-8.01.2102.0048.AIX.ppc_64.update.bff
creating: AIX/Tools/
inflating: AIX/Tools/cfg_upgrade
inflating: AIX/Tools/ouc
inflating: AIX/unattend_install.conf
js-hxzg-dg-a#lslpp -l U*.*.rte
lslpp: 0504-132 Fileset U*.*.rte not installed.
js-hxzg-dg-a#cd AIX
js-hxzg-dg-a#ls
Docs Packages Tools install.tar unattend_install.conf
js-hxzg-dg-a#tar -xvf install.tar
x install.sh, 160823 bytes, 315 media blocks.
js-hxzg-dg-a#ls
Docs Packages Tools install.sh install.tar unattend_install.conf
js-hxzg-dg-a#chmod +x install.sh
js-hxzg-dg-a#sh install.sh
NOTICE 1 :The UltraPath for AIX requires services to be stopped during the install.
After the install is completed, the system must be restarted.
NOTICE 2 :For properties of SAN HBA,please set dyntrk to yes and set fc_err_recov to fast_fail.
If not,the function of fail_over may be invalid.
The os is AIX 7.1
+-----------------------------------------------------------------------------+
Pre-installation Verification...
+-----------------------------------------------------------------------------+
Verifying selections...done
Verifying requisites...done
Results...
SUCCESSES
---------
Filesets listed in this section passed pre-installation verification
and will be installed.
Selected Filesets
-----------------
UltraPath.AIX.ppc_64.rte 8.1.2102.48 # UltraPath for AIX
<< End of Success Section >>
+-----------------------------------------------------------------------------+
BUILDDATE Verification ...
+-----------------------------------------------------------------------------+
Verifying build dates...done
FILESET STATISTICS
------------------
1 Selected to be installed, of which:
1 Passed pre-installation verification
----
1 Total to be installed
0503-409 installp: bosboot verification starting...
installp: bosboot verification completed.
+-----------------------------------------------------------------------------+
Installing Software...
+-----------------------------------------------------------------------------+
installp: APPLYING software for:
UltraPath.AIX.ppc_64.rte 8.1.2102.48
Begin to check the size of the boot image
NOTICE 1: The UltraPath for AIX requires services to be stopped during the install.
After the install is completed, the system must be restarted.
NOTICE 2: For properties of SAN HBA,please set dyntrk to yes and set fc_err_recov to fast_fail.
If not,the function of fail_over may be invalid.
NOTICE 3: If array disk exist in system,please delete it first.
If not,the function of UltraPath may be invalid.
Add smit for ultrapath success.
+============================= A T T E N T I O N =============================+
You must restart your system for the configuration changes made to UltraPath to take effect.
+=============================================================================+
UltraPath will use the system hostname for alarm generation and automatic host registration. Make sure that the system hostname is correctly configured.
Finished processing all filesets. (Total time: 36 secs).
0503-409 installp: bosboot verification starting...
installp: bosboot verification completed.
0503-408 installp: bosboot process starting...
bosboot: Boot image is 55324 512 byte blocks.
0503-292 This update will not fully take effect until after a
system reboot.
* * * A T T E N T I O N * * *
System boot image has been updated. You should reboot the
system as soon as possible to properly integrate the changes
and to avoid disruption of current functionality.
installp: bosboot process completed.
+-----------------------------------------------------------------------------+
Summaries:
+-----------------------------------------------------------------------------+
Installation Summary
--------------------
Name Level Part Event Result
-------------------------------------------------------------------------------
UltraPath.AIX.ppc_64.rte 8.1.2102.48 USR APPLY SUCCESS
Install UltraPath For AIX Success.
js-hxzg-dg-a#shutdown -Fr
LINUX安装华为多路径流程:
下载地址:https://down.51cto.com/data/2461927
https://share.weiyun.com/50tDCOo
[root@localhost ~]# cd /tmp
[root@localhost tmp]# ls
OceanStor_UltraPath_21.1.0_RHEL.zip pulse-UXXMfHGOXc0h
[root@localhost tmp]# unzip OceanStor_UltraPath_21.1.0_RHEL.zip
Archive: OceanStor_UltraPath_21.1.0_RHEL.zip
creating: RHEL/
creating: RHEL/doc/
inflating: RHEL/doc/Open Source Software Notice.doc
inflating: RHEL/install.sh
creating: RHEL/packages/
inflating: RHEL/packages/UltraPath-21.02.048-OL5.i386.rpm
inflating: RHEL/packages/UltraPath-21.02.048-OL5.x86_64.rpm
inflating: RHEL/packages/UltraPath-21.02.048-OL6.i386.rpm
inflating: RHEL/packages/UltraPath-21.02.048-OL6.x86_64.rpm
inflating: RHEL/packages/UltraPath-21.02.048-OL7.x86_64.rpm
inflating: RHEL/packages/UltraPath-21.02.048-RHEL4.i386.rpm
inflating: RHEL/packages/UltraPath-21.02.048-RHEL4.x86_64.rpm
inflating: RHEL/packages/UltraPath-21.02.048-RHEL5.i386.rpm
inflating: RHEL/packages/UltraPath-21.02.048-RHEL5.x86_64.rpm
inflating: RHEL/packages/UltraPath-21.02.048-RHEL6.i386.rpm
inflating: RHEL/packages/UltraPath-21.02.048-RHEL6.x86_64.rpm
inflating: RHEL/packages/UltraPath-21.02.048-RHEL7.x86_64.rpm
inflating: RHEL/unattend_install.conf
[root@localhost tmp]# ls
OceanStor_UltraPath_21.1.0_RHEL.zip pulse-UXXMfHGOXc0h RHEL
[root@localhost tmp]# cd RHEL/
[root@localhost RHEL]# ls
doc install.sh packages unattend_install.conf
[root@localhost RHEL]# ls -l
total 192
drwxr-xr-x 2 root root 4096 Feb 26 2018 doc
-rw-r--r-- 1 root root 182574 Feb 26 2018 install.sh
drwxr-xr-x 2 root root 4096 Feb 26 2018 packages
-rw-r--r-- 1 root root 1904 Feb 26 2018 unattend_install.conf
[root@localhost RHEL]# chmod +x install.sh
[root@localhost RHEL]# ls -l
total 192
drwxr-xr-x 2 root root 4096 Feb 26 2018 doc
-rwxr-xr-x 1 root root 182574 Feb 26 2018 install.sh
drwxr-xr-x 2 root root 4096 Feb 26 2018 packages
-rw-r--r-- 1 root root 1904 Feb 26 2018 unattend_install.conf
[root@localhost RHEL]# ./install.sh
iscsi is not installed.
complete FC checking.
Verify the UltraPath existence.
The UltraPath is not installed.
iscsi is not installed.
Modify system configuration.[file:/etc/modprobe.d/nxupmodules.conf,module:qla2xxx,item:qlport_down_retry,value:5]
Modify system configuration.[file:/etc/modprobe.d/nxupmodules.conf,module:lpfc,item:lpfc_nodev_tmo,value:5]
If the operating system is installed on a local drive of the server, you are advised
to choose boot from local; if the operating system is installed on a SAN storage
system, you must choose boot from san. Please choose the boot type of your system:
<1>--boot-from-Local
<2>--boot-from-SAN
please input your select:1
Preparing... ##################################################
UltraPath ##################################################
User configuration is saved successfully.
The boot service is installed successfully.
The running service is installed successfully.
************************************Attention************************************
* UltraPath would modify some parameters of HBA cards for better performace. If *
* UltraPath is installed for the first time, you may need to update the initrd *
* image before system reboot to make the modification take effect. *
*********************************************************************************
*********************************************************************************
* UltraPath will use the system hostname for alarm generation and automatic host*
* registration. Make sure that the system hostname is correctly configured.. *
*********************************************************************************
The installation is complete. Whether to restart the system now?
<Y|N>:y
Broadcast message from root@localhost.localdomain
(/dev/pts/0) at 15:59 ...
The system is going down for reboot NOW!
添加主机--->添加主机组--->创建映射视图
创建LUN组和主机组,形成对应关系
添加LUN组,加到对应的主机对应的LUN组
亿速云「云服务器」,即开即用、新一代英特尔至强铂金CPU、三副本存储NVMe SSD云盘,价格低至29元/月。点击查看>>
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。