0.说明
内容会有点多,但是下面的内容都是自己在学习LNMP环境搭建过程中的完整再现,所以非常具有参考价值!
下面用一个以最小化方式(Minimal)安装的CentOS 6.5操作系统为例,演示LNMP环境完整搭建过程,并且最后部署了一个WordPress博客,最后完成的效果如下:
1.关于实验环境的说明
本次实验的测试环境使用的宿主机操作系统为Windows 7,在Vmware虚拟机安装CentOS 6.5,说明如下:
宿主机操作系统Windows 7
虚拟机安装的操作系统CentOS 6.5
虚拟机操作系统上网方式NAT
而当使用NAT的方式进行上网时虚拟机、宿主机之间的网络连接关系可如下所示:
关于为什么网络拓扑结构是这样的,这里不展开说明,可以参考博主的另一篇博文《在实践中深入理解VMware虚拟机的上网模式NAT模式》,这篇文章深入地分析了VMware虚拟机使用NAT模式上网时的网络结构细节,相信看完这篇文章后,这里搭建Nginx的实验环境也就很容易理解了。
所以首先,应该是自己先配置好网络环境,让宿主机跟我们的虚拟机可以通信,实际上,如果理解了VMware虚拟机上网方式的原理,同时对CentOS的网络配置也很熟悉,这一步是可以很轻松完成的,这里就不给出过程了,这里所用的IP地址跟上面的图示是一样的。
最后,我们是在宿主机上访问我们搭建的WordPress博客的,非常不错,可以体验一下!
2.LNMP环境搭建:Nginx安装、测试与域名配置
事实上,在另一篇博文中有非常详细的介绍《在CentOS上编译安装Nginx+实验环境搭建+测试》,不过这里为了完整性,依然会给出所有步骤,只是过程会简化很多。
(1)Nginx安装
1.安装Nginx依赖函数库pcre、openssl-devel
[root@leaf ~]# yum install -y pcre pcre-devel openssl openssl-devel ...... [root@leaf ~]# rpm -q pcre pcre-devel openssl openssl-devel pcre-7.8-7.el6.x86_64 pcre-devel-7.8-7.el6.x86_64 openssl-1.0.1e-48.el6_8.4.x86_64 openssl-devel-1.0.1e-48.el6_8.4.x86_64
2.下载安装Nginx
这里使用Nginx1.6.3,如下:
# 下载Nginx [root@leaf ~]# yum install -y wget [root@leaf ~]# mkdir tools [root@leaf ~]# cd tools/ [root@leaf tools]# wget http://nginx.org/download/nginx-1.6.3.tar.gz [root@leaf tools]# ll 总用量 788 -rw-r--r--. 1 root root 805253 4月 8 2015 nginx-1.6.3.tar.gz # 解压缩 [root@leaf tools]# tar zxf nginx-1.6.3.tar.gz [root@leaf tools]# ll 总用量 792 drwxr-xr-x. 8 1001 1001 4096 4月 7 2015 nginx-1.6.3 -rw-r--r--. 1 root root 805253 4月 8 2015 nginx-1.6.3.tar.gz # 指定编译参数 [root@leaf tools]# yum install -y gcc # 需要先安装gcc [root@leaf tools]# mkdir /application # 作为Nginx的安装目录 [root@leaf tools]# useradd nginx -s /sbin/nologin -M [root@leaf tools]# tail -1 /etc/passwd nginx:x:500:500::/home/nginx:/sbin/nologin [root@leaf tools]# cd nginx-1.6.3 [root@leaf nginx-1.6.3]# ./configure --user=nginx --group=nginx --prefix=/application/nginx-1.6.3/ --with-http_stub_status_module --with-http_ssl_module [root@leaf nginx-1.6.3]# echo $? # 结果输出0则说明命令执行成功 0 # 编译 [root@leaf nginx-1.6.3]# make [root@leaf nginx-1.6.3]# echo $? 0 # 安装 [root@leaf nginx-1.6.3]# make install [root@leaf nginx-1.6.3]# echo $? 0 # 建立安装目录的软链接 [root@leaf nginx-1.6.3]# ln -s /application/nginx-1.6.3/ /application/nginx [root@leaf nginx-1.6.3]# ls -l /application/ 总用量 4 lrwxrwxrwx. 1 root root 25 3月 4 04:28 nginx -> /application/nginx-1.6.3/ drwxr-xr-x. 6 root root 4096 3月 4 04:27 nginx-1.6.3
(2)Nginx测试
1.启动Nginx
[root@leaf ~]# /application/nginx/sbin/nginx -t # 检查配置文件 nginx: the configuration file /application/nginx-1.6.3//conf/nginx.conf syntax is ok nginx: configuration file /application/nginx-1.6.3//conf/nginx.conf test is successful [root@leaf ~]# /application/nginx/sbin/nginx # 启动Nginx服务
2.CentOS上验证Nginx服务
[root@leaf ~]# netstat -lntup | grep 80 tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN 3929/nginx [root@leaf ~]# curl localhost <!DOCTYPE html> <html> <head> <title>Welcome to nginx!</title> <style> body { width: 35em; margin: 0 auto; font-family: Tahoma, Verdana, Arial, sans-serif; } </style> </head> <body> <h2>Welcome to nginx!</h2> <p>If you see this page, the nginx web server is successfully installed and working. Further configuration is required.</p> <p>For online documentation and support please refer to <a href="http://nginx.org/">nginx.org</a>.<br/> Commercial support is available at <a href="http://nginx.com/">nginx.com</a>.</p> <p><em>Thank you for using nginx.</em></p> </body> </html>
3.宿主机上验证Nginx服务
在宿主机浏览器上输入CentOS主机的IP地址10.0.0.101,如下:
(3)域名配置
这一部分的内容在另一篇博文也有很详细的介绍《Nginx配置多个基于域名的虚拟主机+实验环境搭建+测试》,可以参考一下,所以这里不会给出非常详细的说明。
因为要搭建一个博客服务,所以这里配置的域名为blog.xpleaf.org,操作过程如下:
1.最小化配置文件
[root@leaf ~]# cd /application/nginx/conf/ [root@leaf conf]# wc -l nginx.conf 117 nginx.conf [root@leaf conf]# wc -l nginx.conf.default 117 nginx.conf.default [root@leaf conf]# egrep -v "#|^$" nginx.conf.default >nginx.conf [root@leaf conf]# wc -l nginx.conf 22 nginx.conf [root@leaf conf]# cat nginx.conf worker_processes 1; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; server { listen 80; server_name localhost; location / { root html; index index.html index.htm; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } } }
2.修改配置文件
修改nginx.conf,并且增加配置文件extra/blog.conf,如下:
[root@leaf conf]# cat nginx.conf worker_processes 1; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; include extra/blog.conf; } [root@leaf conf]# cat extra/blog.conf server { listen 80; server_name blog.xpleaf.org; location / { root html/blog; index index.html index.htm; } }
3.创建域名对应的站点目录及文件
[root@leaf conf]# cd ../html/ [root@leaf html]# mkdir blog [root@leaf html]# echo "This page is: blog.xpleaf.org">blog/index.html [root@leaf html]# cat blog/index.html This page is: blog.xpleaf.org
4.重启Nginx服务
[root@leaf html]# /application/nginx/sbin/nginx -t nginx: the configuration file /application/nginx-1.6.3//conf/nginx.conf syntax is ok [root@leaf html]# /application/nginx/sbin/nginx -s reload # 平滑重启
5.CentOS 6.5上进行测试
先修改/etc/hosts文件:
[root@leaf html]# echo "127.0.0.1 blog.xpleaf.org" >>/etc/hosts [root@leaf html]# tail -1 /etc/hosts 127.0.0.1 blog.xpleaf.org
再使用命令测试:
[root@leaf html]# curl blog.xpleaf.org This page is: blog.xpleaf.org [root@leaf html]# wget blog.xpleaf.org --2017-03-04 04:58:42-- http://blog.xpleaf.org/ 正在解析主机 blog.xpleaf.org... 127.0.0.1 正在连接 blog.xpleaf.org|127.0.0.1|:80... 已连接。 已发出 HTTP 请求,正在等待回应... 200 OK 长度:30 [text/html] 正在保存至: “index.html.1” 100%[====================================>] 30 --.-K/s in 0s 2017-03-04 04:58:42 (2.14 MB/s) - 已保存 “index.html.1” [30/30])
6.宿主机Windows 7上进行测试
同样是先修改hosts文件,Windows 7的hosts文件在C:\Windows\System32\drivers\etc,同样添加下面一行:
10.0.0.101 blog.xpleaf.org
使用浏览器访问blog.xpleaf.org,如下:
那么到这里,LNMP的环境中,Nginx的安装已经完成了,你是否安装成功了呢?
3.LNMP环境搭建:MySQL安装与基本安全优化
这里采用二进制安装的方式来安装MySQL,安装的版本为:MySQL Server 5.5.54,可以在https://dev.mysql.com/downloads/mysql/5.5.html#downloads中下载。
MySQL安装完成后会做一些基本的安全优化。
(1)MySQL安装
1.创建MySQL用户的账号
[root@leaf ~]# groupadd mysql [root@leaf ~]# useradd -s /sbin/nologin -g mysql -M mysql [root@leaf ~]# tail -1 /etc/passwd mysql:x:501:501::/home/mysql:/sbin/nologin
2.下载MySQL
可以使用wget来进行安装,也可以先下载到Windows 7上,然后使用SecureCRT,在CentOS上使用rz命令(需要使用yum install -y lrzsz命令安装)上传到我们的CentOS上,其实不管哪一种方式,只要有方式获取到该安装包就可以了,下面使用的是wget获取安装包的方式:
[root@leaf tools]# wget https://dev.mysql.com/get/Downloads/MySQL-5.5/mysql-5.5.54-linux2.6-x86_64.tar.gz [root@leaf tools]# ls -l mysql-5.5.54-linux2.6-x86_64.tar.gz -rw-r--r--. 1 root root 185911232 3月 3 13:34 mysql-5.5.54-linux2.6-x86_64.tar.gz
3.解压并移到指定目录
[root@leaf tools]# tar xf mysql-5.5.54-linux2.6-x86_64.tar.gz [root@leaf tools]# mv mysql-5.5.54-linux2.6-x86_64 /application/mysql-5.5.54 [root@leaf tools]# ln -s /application/mysql-5.5.54/ /application/mysql [root@leaf tools]# ls -l /application/ 总用量 8 lrwxrwxrwx. 1 root root 26 3月 4 06:43 mysql -> /application/mysql-5.5.54/ drwxr-xr-x. 13 root root 4096 3月 4 06:42 mysql-5.5.54 lrwxrwxrwx. 1 root root 25 3月 4 04:28 nginx -> /application/nginx-1.6.3/ drwxr-xr-x. 11 root root 4096 3月 4 04:30 nginx-1.6.3
4.初始化MySQL配置文件
[root@leaf mysql]# cp support-files/my-small.cnf /etc/my.cnf cp:是否覆盖"/etc/my.cnf"? y
5.初始化MySQL数据库文件
[root@leaf mysql]# mkdir -p /application/mysql/data/ [root@leaf mysql]# chown -R mysql.mysql /application/mysql [root@leaf mysql]# yum install -y libaio # 安装MySQL依赖函数库,否则下面的初始化会失败 [root@leaf mysql]# /application/mysql/scripts/mysql_install_db --basedir=/application/mysql --datadir=/application/mysql/data --user=mysql ...... # 输出结果可以看到两个OK,即说明初始化成功 [root@leaf mysql]# echo $? # 或者通过该命令,输出为0,即说明上一个步骤的命令执行成功 0 # 上面之后可以看到/application/mysql/data/目录下生成的数据库文件
6.配置并启动MySQL数据库
#(1)设置MySQL启动脚本 [root@leaf mysql]# cp support-files/mysql.server /etc/init.d/mysqld [root@leaf mysql]# chmod +x /etc/init.d/mysqld [root@leaf mysql]# ls -l /etc/init.d/mysqld -rwxr-xr-x. 1 root root 10875 3月 4 06:56 /etc/init.d/mysqld #(2)替换启动脚本中MySQL默认的安装路径/usr/local/mysql [root@leaf mysql]# sed -i 's#/usr/local/mysql#/application/mysql#g' /application/mysql/bin/mysqld_safe /etc/init.d/mysqld #(3)启动MySQL数据库 [root@leaf mysql]# /etc/init.d/mysqld start Starting MySQL.Logging to '/application/mysql/data/leaf.err'. ... SUCCESS! #(4)检查MySQL数据库是否启动 [root@leaf mysql]# netstat -lntup | grep mysql tcp 0 0 0.0.0.0:3306 0.0.0.0:* LISTEN 4400/mysqld #(5)查看日志 [root@leaf mysql]# tail -10 /application/mysql/data/leaf.err InnoDB: Creating foreign key constraint system tables InnoDB: Foreign key constraint system tables created 170304 7:00:28 InnoDB: Waiting for the background threads to start 170304 7:00:29 InnoDB: 5.5.54 started; log sequence number 0 170304 7:00:29 [Note] Server hostname (bind-address): '0.0.0.0'; port: 3306 170304 7:00:29 [Note] - '0.0.0.0' resolves to '0.0.0.0'; 170304 7:00:29 [Note] Server socket created on IP: '0.0.0.0'. 170304 7:00:29 [Note] Event Scheduler: Loaded 0 events 170304 7:00:29 [Note] /application/mysql/bin/mysqld: ready for connections. Version: '5.5.54' socket: '/tmp/mysql.sock' port: 3306 MySQL Community Server (GPL) #(6)设置MySQL开机启动 [root@leaf mysql]# chkconfig --add mysqld [root@leaf mysql]# chkconfig mysqld on [root@leaf mysql]# chkconfig --list mysqld mysqld 0:关闭 1:关闭 2:启用 3:启用 4:启用 5:启用 6:关闭 #(7)配置mysql命令的全局使用路径(注意这里配置的是命令,前面配置的只是启动脚本) [root@leaf mysql]# echo 'export PATH=/application/mysql/bin:$PATH' >>/etc/profile [root@leaf mysql]# source /etc/profile [root@leaf mysql]# echo $PATH /application/mysql/bin:/usr/local/sbin:/usr/local/bin:/sbin:/bin:/usr/sbin:/usr/bin:/root/bin #(8)登陆MySQL测试 [root@leaf mysql]# mysql Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 1 Server version: 5.5.54 MySQL Community Server (GPL) Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | test | +--------------------+ 4 rows in set (0.05 sec) mysql> select user(); # 查看当前登陆的用户 +----------------+ | user() | +----------------+ | root@localhost | +----------------+ 1 row in set (0.00 sec) mysql> select host, user from mysql.user; +-----------+------+ | host | user | +-----------+------+ | 127.0.0.1 | root | | ::1 | root | | leaf | | | leaf | root | | localhost | | | localhost | root | +-----------+------+ 6 rows in set (0.00 sec) mysql> quit Bye
(2)MySQL基本安全优化
1.为root用户设置密码
[root@leaf mysql]# mysqladmin -u root password '123456'
2.清理无用的MySQL用户及数据库
[root@leaf mysql]# mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 3 Server version: 5.5.54 MySQL Community Server (GPL) Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql> select user, host from mysql.user; +------+-----------+ | user | host | +------+-----------+ | root | 127.0.0.1 | | root | ::1 | | | leaf | | root | leaf | | | localhost | | root | localhost | +------+-----------+ 6 rows in set (0.00 sec) mysql> drop user "root"@"::1"; Query OK, 0 rows affected (0.00 sec) mysql> drop user ""@"leaf"; Query OK, 0 rows affected (0.00 sec) mysql> drop user "root"@"leaf"; Query OK, 0 rows affected (0.01 sec) mysql> drop user ""@"localhost"; Query OK, 0 rows affected (0.01 sec) mysql> select user, host from mysql.user; +------+-----------+ | user | host | +------+-----------+ | root | 127.0.0.1 | | root | localhost | +------+-----------+ 2 rows in set (0.00 sec) mysql> flush privileges; Query OK, 0 rows affected (0.00 sec) # 删除无用的数据库 mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | test | +--------------------+ 4 rows in set (0.00 sec) mysql> drop database test; Query OK, 0 rows affected (0.01 sec) mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | +--------------------+ 3 rows in set (0.00 sec)
到此为此,MySQL也安装完成了!
4.LNMP环境搭建:PHP(FastCGI方式)安装、配置与启动
(1)安装PHP依赖函数库
1.安装lib库
需要安装的lib库如下:
zlib-devel libxml2-devel libjpeg-devel libjpeg-turbo-devel libiconv-devel freetype-devel libpng-devel gd-devel libcurl-devel libxslt-devel
其中除了libiconv库外,其他都可以通过yum的方式进行安装,安装如下:
# 使用yum安装除libiconv-devel之外的其它lib库 [root@leaf mysql]# yum install -y zlib-devel libxml2-devel libjpeg-devel libjpeg-turbo-devel libiconv-devel freetype-devel libpng-devel gd-devel libcurl-devel libxslt-devel # 编译安装libiconv-devel [root@leaf tools]# wget http://ftp.gnu.org/pub/gnu/libiconv/libiconv-1.14.tar.gz [root@leaf tools]# tar zxf libiconv-1.14.tar.gz [root@leaf tools]# cd libiconv-1.14 [root@leaf libiconv-1.14]# ./configure --prefix=/usr/local/libiconv [root@leaf libiconv-1.14]# make [root@leaf libiconv-1.14]# make install
2.安装libmcrypt库
[root@leaf ~]# wget -O /etc/yum.repos.d/epel.repo http://mirrors.aliyun.com/repo/epel-6.repo [root@leaf ~]# yum install -y libmcrypt-devel
3.安装mhash加密扩展库
[root@leaf ~]# yum install -y mhash
4.安装mcrypt加密扩展库
[root@leaf ~]# yum install -y mcrypt
(2)安装PHP
使用的PHP版本号为5.3.27,如下:
1.下载PHP安装包
[root@leaf tools]# wget http://cn2.php.net/get/php-5.3.27.tar.gz/from/this/mirror [root@leaf tools]# mv mirror php-5.3.27.tar.gz [root@leaf tools]# ls -l php-5.3.27.tar.gz -rw-r--r--. 1 root root 15008639 1月 21 2015 php-5.3.27.tar.gz
2.解压缩
[root@leaf tools]# tar zxf php-5.3.27.tar.gz [root@leaf tools]# cd php-5.3.27 [root@leaf php-5.3.27]# pwd /root/tools/php-5.3.27
3.配置PHP的安装参数
配置项非常多,如下:
./configure \ --prefix=/application/php5.3.27 \ --with-mysql=/application/mysql \ --with-iconv-dir=/usr/local/libiconv \ --with-freetype-dir \ --with-jpeg-dir \ --with-png-dir \ --with-zlib \ --with-libxml-dir=/usr \ --enable-xml \ --disable-rpath \ --enable-safe-mode \ --enable-bcmath \ --enable-shmop \ --enable-sysvsem \ --enable-inline-optimization \ --with-curl \ --with-curlwrappers \ --enable-mbregex \ --enable-fpm \ --enable-mbstring \ --with-mcrypt \ --with-gd \ --enable-gd-native-ttf \ --with-openssl \ --with-mhash \ --enable-pcntl \ --enable-sockets \ --with-xmlrpc \ --enable-zip \ --enable-soap \ --enable-short-tags \ --enable-zend-multibyte \ --enable-static \ --with-xsl \ --with-fpm-user=nginx \ --with-fpm-group=nginx \ --enable-ftp
可以将其直接复制到命令行进行配置,这样就可以减少出错的概率:
[root@leaf php-5.3.27]# ./configure \ > --prefix=/application/php5.3.27 \ > --with-mysql=/application/mysql \ > --with-iconv-dir=/usr/local/libiconv \ > --with-freetype-dir \ > --with-jpeg-dir \ > --with-png-dir \ > --with-zlib \ > --with-libxml-dir=/usr \ > --enable-xml \ > --disable-rpath \ > --enable-safe-mode \ > --enable-bcmath \ > --enable-shmop \ > --enable-sysvsem \ > --enable-inline-optimization \ > --with-curl \ > --with-curlwrappers \ > --enable-mbregex \ > --enable-fpm \ > --enable-mbstring \ > --with-mcrypt \ > --with-gd \ > --enable-gd-native-ttf \ > --with-openssl \ > --with-mhash \ > --enable-pcntl \ > --enable-sockets \ > --with-xmlrpc \ > --enable-zip \ > --enable-soap \ > --enable-short-tags \ > --enable-zend-multibyte \ > --enable-static \ > --with-xsl \ > --with-fpm-user=nginx \ > --with-fpm-group=nginx \ > --enable-ftp ...... +--------------------------------------------------------------------+ | License: | | This software is subject to the PHP License, available in this | | distribution in the file LICENSE. By continuing this installation | | process, you are bound by the terms of this license agreement. | | If you do not agree with the terms of this license, you must abort | | the installation process at this point. | +--------------------------------------------------------------------+ Thank you for using PHP.
4.编译PHP
[root@leaf php-5.3.27]# ln -s /application/mysql/lib/libmysqlclient.so.18 /usr/lib64/ [root@leaf php-5.3.27]# touch ext/phar/phar.phar [root@leaf php-5.3.27]# make ...... [root@leaf php-5.3.27]# echo $? 0
5.安装PHP
[root@leaf php-5.3.27]# make install /root/tools/php-5.3.27/build/shtool install -c ext/phar/phar.phar /application/php5.3.27/bin ln -s -f /application/php5.3.27/bin/phar.phar /application/php5.3.27/bin/phar Installing PDO headers: /application/php5.3.27/include/php/ext/pdo/ ...... [root@leaf php-5.3.27]# echo $? 0
(3)配置与启动PHP
1.设置PHP安装目录软链接
[root@leaf php-5.3.27]# ln -s /application/php5.3.27/ /application/php [root@leaf php-5.3.27]# ls -l /application/php lrwxrwxrwx. 1 root root 23 3月 4 08:59 /application/php -> /application/php5.3.27/
2.拷贝PHP配置文件到PHP默认目录
[root@leaf php-5.3.27]# cp php.ini-production /application/php/lib/php.ini [root@leaf php-5.3.27]# ls -l /application/php/lib/php.ini -rw-r--r--. 1 root root 69627 3月 4 09:00 /application/php/lib/php.ini
3.配置php-fpm.conf文件
[root@leaf php-5.3.27]# cd /application/php/etc/ [root@leaf etc]# ls pear.conf php-fpm.conf.default [root@leaf etc]# cp php-fpm.conf.default php-fpm.conf
4.启动PHP服务php-fpm
[root@leaf etc]# /application/php/sbin/php-fpm
5.检查启动进程与侦听端口号
[root@leaf etc]# ps -ef | grep php-fpm root 129256 1 0 09:05 ? 00:00:00 php-fpm: master process (/application/php5.3.27/etc/php-fpm.conf) nginx 129257 129256 0 09:05 ? 00:00:00 php-fpm: pool www nginx 129258 129256 0 09:05 ? 00:00:00 php-fpm: pool www root 129260 13743 0 09:06 pts/1 00:00:00 grep php-fpm [root@leaf etc]# netstat -lntup | grep 9000 tcp 0 0 127.0.0.1:9000 0.0.0.0:* LISTEN 129256/php-fpm
至此,PHP也安装完成了!LNMP的各个组件都安装好了,下面就要对LNMP环境进行测试了。
5.LNMP环境测试
(1)配置Nginx支持PHP程序请求访问
1.查看当前Nginx配置
[root@leaf etc]# cd /application/nginx/conf/ [root@leaf conf]# cat nginx.conf worker_processes 1; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; sendfile on; keepalive_timeout 65; include extra/blog.conf; } [root@leaf conf]# cat extra/blog.conf server { listen 80; server_name blog.xpleaf.org; location / { root html/blog; index index.html index.htm; } }
2.修改extra/blog.conf配置文件
[root@leaf conf]# cat extra/blog.conf server { listen 80; server_name blog.xpleaf.org; location / { root html/blog; index index.html index.htm; } location ~ .*\.(php|php5)?$ { root html/blog; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi.conf; } }
3.检查并启动Nginx
[root@leaf conf]# /application/nginx/sbin/nginx -t nginx: the configuration file /application/nginx-1.6.3//conf/nginx.conf syntax is ok nginx: configuration file /application/nginx-1.6.3//conf/nginx.conf test is successful [root@leaf conf]# /application/nginx/sbin/nginx -s reload
(2)测试LNMP环境是否生效
1.配置域名站点目录
[root@leaf conf]# cd /application/nginx/html/blog/ [root@leaf blog]# echo "<?php phpinfo(); ?>" >test_info.php [root@leaf blog]# cat test_info.php <?php phpinfo(); ?>
2.宿主机上在浏览器中输入地址http://blog.xpleaf.org/test_info.php进行访问
(3)测试PHP连接MySQL是否正常
1.编辑text_mysql.php
[root@leaf blog]# cat test_mysql.php <?php $link_id=mysql_connect('localhost', 'root', '123456'); if($link_id){ echo "mysql succesful by xpleaf !"; }else{ echo mysql_error(); } ?>
2.宿主机上在浏览器中输入地址http://blog.xpleaf.org/test_mysql.php进行访问
至此,LNMP环境搭建与测试完成了,下面就可以开始部署WordPress了!
6.部署WordPress
(1)MySQL数据库准备
1.登陆mysql
[root@leaf blog]# mysql -u root -p Enter password: Welcome to the MySQL monitor. Commands end with ; or \g. Your MySQL connection id is 5 Server version: 5.5.54 MySQL Community Server (GPL) Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved. Oracle is a registered trademark of Oracle Corporation and/or its affiliates. Other names may be trademarks of their respective owners. Type 'help;' or '\h' for help. Type '\c' to clear the current input statement. mysql>
2.创建数据库wordpress
mysql> create database wordpress; Query OK, 1 row affected (0.32 sec) mysql> show databases; +--------------------+ | Database | +--------------------+ | information_schema | | mysql | | performance_schema | | wordpress | +--------------------+ 4 rows in set (0.00 sec)
3.创建wordpress blog管理用户
mysql> grant all on wordpress.* to wordpress@'localhost' identified by '123456'; Query OK, 0 rows affected (0.08 sec) mysql> show grants for wordpress@'localhost'; +------------------------------------------------------------------------------------------------------------------+ | Grants for wordpress@localhost | +------------------------------------------------------------------------------------------------------------------+ | GRANT USAGE ON *.* TO 'wordpress'@'localhost' IDENTIFIED BY PASSWORD '*6BB4837EB74329105EE4568DDA7DC67ED2CA2AD9' | | GRANT ALL PRIVILEGES ON `wordpress`.* TO 'wordpress'@'localhost' | +------------------------------------------------------------------------------------------------------------------+ 2 rows in set (0.00 sec)
4.刷新MySQL用户权限
mysql> flush privileges; Query OK, 0 rows affected (0.31 sec)
5.检查MySQL登录用户
mysql> select user,host from mysql.user; +-----------+-----------+ | user | host | +-----------+-----------+ | root | 127.0.0.1 | | root | localhost | | wordpress | localhost | +-----------+-----------+ 3 rows in set (0.00 sec)
(2)Nginx配置准备
1.修改blog.conf配置文件
[root@leaf conf]# cat extra/blog.conf server { listen 80; server_name blog.xpleaf.org; location / { root html/blog; index index.php index.html index.htm; } location ~ .*\.(php|php5)?$ { root html/blog; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi.conf; } } # 相比前面的配置文件,只是在/下添加了index.php # 不过需要注意的是,index.php一定要放在index关键字之后, # 这样访问blog.xpleaf.org时,才会打开我们的WordPress页面
2.重启Nginx服务
[root@leaf conf]# /application/nginx/sbin/nginx -s reload
(3)配置WordPress
1.获取WordPress安装包
[root@leaf tools]# wget https://cn.wordpress.org/wordpress-4.7.3-zh_CN.tar.gz [root@leaf tools]# ls -lh wordpress-4.7.2-zh_CN.tar.gz -rw-r--r--. 1 root root 8.1M 1月 28 08:53 wordpress-4.7.2-zh_CN.tar.gz
2.解压缩与配置站点目录
[root@leaf tools]# cp wordpress-4.7.2-zh_CN.tar.gz /application/nginx/html/blog/ [root@leaf tools]# cd /application/nginx/html/blog/ [root@leaf blog]# tar zxf wordpress-4.7.2-zh_CN.tar.gz [root@leaf blog]# ls index.html test_mysql.php wordpress-4.7.2-zh_CN.tar.gz test_info.php wordpress [root@leaf blog]# rm -rf test_* wordpress-4.7.2-zh_CN.tar.gz # 删除无用的文件 [root@leaf blog]# ls index.html wordpress [root@leaf blog]# mv wordpress/* ./ # 将wordpress程序移到当前blog目录下 [root@leaf blog]# ls index.html wp-admin wp-includes wp-signup.php index.php wp-blog-header.php wp-links-opml.php wp-trackback.php license.txt wp-comments-post.php wp-load.php xmlrpc.php readme.html wp-config-sample.php wp-login.php wordpress wp-content wp-mail.php wp-activate.php wp-cron.php wp-settings.php [root@leaf blog]# ls -l 总用量 196 -rw-r--r--. 1 root root 30 3月 4 04:54 index.html -rw-r--r--. 1 nobody 65534 418 9月 25 2013 index.php -rw-r--r--. 1 nobody 65534 19935 1月 3 02:51 license.txt -rw-r--r--. 1 nobody 65534 6956 1月 28 08:53 readme.html drwxr-xr-x. 2 nobody 65534 4096 3月 4 09:50 wordpress ......
3.对blog下所有文件授予nginx用户和组的权限
[root@leaf blog]# chown -R nginx.nginx ../blog/ [root@leaf blog]# ls -l 总用量 196 -rw-r--r--. 1 nginx nginx 30 3月 4 04:54 index.html -rw-r--r--. 1 nginx nginx 418 9月 25 2013 index.php -rw-r--r--. 1 nginx nginx 19935 1月 3 02:51 license.txt -rw-r--r--. 1 nginx nginx 6956 1月 28 08:53 readme.html drwxr-xr-x. 2 nginx nginx 4096 3月 4 09:50 wordpress ......
(4)安装WordPress
在宿主机浏览器上输入地址:http://blog.xpleaf.org,如下:
接下来的安装都是非常人性化的,点击“现在就开始”,出现下面的页面:
填好信息后,点击“提交”,如下:
点击“进行安装”,接下来就会让我们填写一些信息,如下:
点击“安装WordPress”,之后就会显示如下页面:
显示上面的页面,就说明我们的WordPress安装成功了!接下来就可以好好管理自己的个人WordPress博客站点了!
7.下一步要做什么
可以在云主机上,如腾讯云或者阿里云上搭建LNMP环境,再部署一个WordPress博客程序,为了达到域名访问的效果,可以购买一个域名,然后自己搭建DNS服务器,这会是非常不错的体验!
接下来就可以考虑对LNMP进行优化了。
8.参考资料
《跟老男孩学Linux运维:Web集群实战》
MySQL官方站点:https://www.mysql.com/downloads/
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。