怎么搭建LVS+Keepalived+MySQL

本篇内容主要讲解“怎么搭建LVS+Keepalived+MySQL”，感兴趣的朋友不妨来看看。本文介绍的方法操作简单快捷，实用性强。下面就让小编来带大家学习“怎么搭建LVS+Keepalived+MySQL”吧!

LVS负责负载均衡转发请求，keepalived负责检查LVS的realserver状态，及时remove失效节点、add复活节点。
本实验主要功能测试，所以只准备了两台MySQL服务器，仅为简单说明问题。
vm1 10.0.0.11        master   server_id 11
vm2 10.0.0.12        slave         server_id 12

Director:
vm3  10.0.0.14  

VIP: 10.0.0.20

1 在Directory server vm3 上安装ipvsadm和keepalived
yum install ipvsadm
安装keepalived
yum install libnfnetlink*
tar -zxvf keepalived-1.2.7.tar.gz
./configure --prefix=/usr/local/keepalived
make && make install
cp /usr/local/keepalived/sbin/keepalived /usr/sbin/
cp /usr/local/keepalived/etc/sysconfig/keepalived /etc/sysconfig/
cp /usr/local/keepalived/etc/rc.d/init.d/keepalived /etc/init.d/
mkdir /etc/keepalived

2 vm1 vm2上，执行以下操作.
echo "1" >/proc/sys/net/ipv4/conf/lo/arp_ignore  
echo "2" >/proc/sys/net/ipv4/conf/lo/arp_announce  
echo "1" >/proc/sys/net/ipv4/conf/all/arp_ignore  
echo "2" >/proc/sys/net/ipv4/conf/all/arp_announce  

ifconfig lo:0 10.0.0.20 netmask 255.255.255.255

3 在Directory server vm3上编辑/etc/keepalived/keepalived.conf文件，内容如下：

点击(此处)折叠或打开

1. global_defs {

2. router_id HaMySQL_1

3. }

4. vrrp_sync_group VGM {

5. group {

6. VI_MYSQL

7. }

8. }

9. vrrp_instance VI_MYSQL {

10. state MASTER

11. interface eth0

12. virtual_router_id 100

13. priority 100

14. advert_int 1

15. authentication {

16. auth_type PASS

17. auth_pass 1111

18. }

19. virtual_ipaddress {

20. 10.0.0.20

21. }

22. }

23. 
    

24. virtual_server 10.0.0.20 3306 {

25. delay_loop 6

26. lb_algo rr

27. lb_kind DR

28. protocol TCP

29. nat_mask 255.255.255.0

30. persistence_timeout 10

31. 
    

32. real_server 10.0.0.11 3306 {

33. weight 3

34. TCP_CHECK {

35. connect_timeout 3

36. nb_get_retry 3

37. delay_before_retry 3

38. connect_port 3306

39. }

40. }

41. 
    

42. real_server 10.0.0.12 3306 {

43. weight 3

44. TCP_CHECK {

45. connect_timeout 3

46. nb_get_retry 3

47. delay_before_retry 3

48. connect_port 3306

49. }

50. }

51. 
    

52. }

4 启动MySQL和keepalived。
vm1:
/usr/local/mysql/bin/mysqld_safe --defaults-file=/data/mysql3306/my.cnf &

vm2:
/usr/local/mysql/bin/mysqld_safe --defaults-file=/data/mysql3306/my.cnf

vm3:
/etc/init.d/keepalived start

5 验证
vm3:
[root@vm3 keepalived]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.20:3306 rr persistent 2
  -> 10.0.0.11:3306               Route   3      1          0
  -> 10.0.0.12:3306               Route   3      1          0

可以看到负载均衡已启动，vm2 vm3都已加进来了。
从客户端连接VIP 10.0.0.20:3306
C:\mysql-5.7.11-winx64\mysql-5.7.11-winx64\bin>mysql.exe -uroot -pmysql -h20.0.0.20 -P3306
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 90
Server version: 5.6.27-log Source distribution

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> select @@server_id;exit;
+-------------+
| @@server_id |
+-------------+
|          11 |
+-------------+
1 row in set (0.00 sec)

从server_id可以看出客户端连接的是vm1。

关掉vm1上的MySQL服务。
[root@vm3 keepalived]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.20:3306 rr persistent 2
  -> 10.0.0.12:3306               Route   3      1          0


LVS规则已经更新，remove了vm1，再次从客户端连接。
C:\mysql-5.7.11-winx64\mysql-5.7.11-winx64\bin>mysql.exe -uroot -pmysql -h20.0.0.20 -P3306
mysql: [Warning] Using a password on the command line interface can be insecure.
Welcome to the MySQL monitor.  Commands end with ; or \g.
Your MySQL connection id is 61
Server version: 5.6.27-log Source distribution

Copyright (c) 2000, 2016, Oracle and/or its affiliates. All rights reserved.

Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.

Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.

mysql> select @@server_id;exit;
+-------------+
| @@server_id |
+-------------+
|          12 |
+-------------+
1 row in set (0.00 sec)

重新启动vm1上的MySQL服务。
[root@vm3 ~]# ipvsadm -Ln
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
  -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
TCP  10.0.0.20:3306 rr persistent 2
  -> 10.0.0.11:3306               Route   3      1          0
  -> 10.0.0.12:3306               Route   3      1          1

LVS规则已自动刷新，vm1重新被加入。

到此，相信大家对“怎么搭建LVS+Keepalived+MySQL”有了更深的了解，不妨来实际操作一番吧！这里是亿速云网站，更多相关内容可以进入相关频道进行查询，关注我们，继续学习！