今天网站后台出现504,前台出现此错误信息：
[14-May-2016 12:03:44] WARNING: [pool www] child 25347, script '/usr/data/ckl-sapi/baiduNotify.php' (request: "POST /baiduNotify.php") executing too slow (10.818417 sec), logging [14-May-2016 12:03:44] WARNING: [pool www] child 25269, script '/usr/data/ckl-sapi/baiduNotify.php' (request: "POST /baiduNotify.php") executing too slow (10.819982 sec), logging [14-May-2016 12:03:44] WARNING: [pool www] child 25268, script '/usr/data/ckl-sapi/baiduNotify.php' (request: "POST /baiduNotify.php") executing too slow (12.392415 sec), logging [14-May-2016 12:04:14] WARNING: [pool www] child 25369, script '/usr/data/ckl-sapi/baiduNotify.php' (request: "POST /baiduNotify.php") executing too slow (10.802581 sec), logging [14-May-2016 12:17:33] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 8 children, there are 0 idle, and 12 total children [14-May-2016 12:17:34] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 16 children, there are 0 idle, and 17 total children [14-May-2016 12:17:35] WARNING: [pool www] seems busy (you may need to increase pm.start_servers, or pm.min/max_spare_servers), spawning 32 children, there are 4 idle, and 22 total children
从信息看，应该是php进程较少：
经过查看发现进程确实很少，解决如下：
修改配置文件增加进程
vim /usr/local/php/etc/php-fpm.ini pm = dynamic #动态模式 pm.max_children = 512 #静态开启的进程数 pm.start_servers = 128 #动态模式的起始进程数 pm.min_spare_servers = 128 #动态模式最小进程数 pm.max_spare_servers = 512 #动态模式最大进程数
数值设置，参考自己的实际硬件配置，可以参考 内存/20M 来计算。
重新加载进程
/etc/init.d/php-fpm reload
等待了一点时间发现又报错：
[14-May-2016 12:21:29] ERROR: failed to ptrace(PEEKDATA) pid 27077: Input/output error (5) [14-May-2016 12:22:13] WARNING: [pool www] child 27024, script '/usr/data/ckl-backend/index.php' (request: "GET /index.php") executing too slow (10.384578 sec), logging [14-May-2016 12:22:13] ERROR: failed to ptrace(PEEKDATA) pid 27024: Input/output error (5) [14-May-2016 12:23:33] WARNING: [pool www] child 26924, script '/usr/data/ckl-backend/index.php' (request: "GET /index.php") executing too slow (10.986032 sec), logging [14-May-2016 12:23:33] ERROR: failed to ptrace(PEEKDATA) pid 26924: Input/output error (5) [14-May-2016 12:26:29] WARNING: [pool www] child 1918, script '/usr/data/ckl-backend/index.php' (request: "GET /index.php") executing too slow (10.408103 sec), logging [14-May-2016 12:26:29] ERROR: failed to ptrace(PEEKDATA) pid 1918: Input/output error (5)
查找资料如下：
It usrears you have request_slowlog_timeout enabled. This normally takes any request longer than N seconds, logs that it was taking a long time, then logs a stack trace of the script so you can see what it was doing that was taking so long.
In your case, the stack trace (to determine what the script is doing) is failing. If you're running out of processes, it is because either:
After php-fpm stops the process to trace it, the process fails to resume because of the error tracing it
The process is resuming but continues to run forever.
My first guess would be to disable request_slowlog_timeout. Since it's not working right, it may be doing more harm than good. If this doesn't fix the issue of running out of processes, then set the php.ini max_execution_time to something that will kill the script for sure.
大概说是设置了slowlog和php的最大执行时间。
解决：
禁止slowlog
vim php-fpm.conf ;request_slowlog_timeout = 10s ;slowlog = /usr/local/log/php-fpm/ckl-slow.log
修改最大执行时间：
vim php.ini max_execution_time = 60
重启进程：
/etc/init.d/php-fpm reload
等待一段时间，发现一切正常。
查看TCP连接相关：
# ss -s Total: 287 (kernel 380) TCP: 597 (estab 122, closed 563, orphaned 0, synrecv 0, timewait 5630/0), ports 577 Transport Total IP IPv6 * 380 - - RAW 0 0 0 UDP 1 1 0 TCP 34 34 0 INET 35 35 0 FRAG 0 0 0
同时发现系统TIMEWAIT 较多，所以优化了一些内核相关参数
# sysct -p bash: sysct: command not found [root@sapi etc]# sysctl -p net.ipv4.ip_forward = 0 net.ipv4.conf.default.rp_filter = 1 net.ipv4.conf.default.accept_source_route = 0 net.ipv4.tcp_max_tw_buckets = 6000 net.ipv4.ip_local_port_range = 1024 65000 net.ipv4.tcp_tw_recycle = 1 net.ipv4.tcp_tw_reuse = 1 net.ipv4.tcp_syncookies = 1 net.ipv4.tcp_max_orphans = 262144 net.ipv4.tcp_keepalive_time = 1200 net.ipv4.tcp_keepalive_intvl = 30 net.ipv4.tcp_keepalive_probes = 3 net.ipv4.tcp_synack_retries = 1 net.ipv4.tcp_syn_retries = 2 net.ipv4.tcp_max_orphans = 262144 net.ipv4.tcp_max_syn_backlog = 262144 net.ipv4.tcp_timestamps = 0 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.ipv4.tcp_rmem = 4096 87380 4194304 net.ipv4.tcp_wmem = 4096 16384 4194304 net.core.wmem_default = 8388608 net.core.rmem_default = 8388608 net.core.rmem_max = 16777216 net.core.wmem_max = 16777216 net.core.somaxconn = 262144 kernel.sysrq = 0 kernel.core_uses_pid = 1 kernel.msgmnb = 65536 kernel.msgmax = 65536 kernel.shmmax = 68719476736 kernel.shmall = 4294967296 vm.swappiness = 0 fs.file-max = 409600
过一阵再查看：
# ss -s Total: 281 (kernel 362) TCP: 520 (estab 22, closed 493, orphaned 0, synrecv 0, timewait 493/0), ports 475 Transport Total IP IPv6 * 362 - - RAW 0 0 0 UDP 1 1 0 TCP 27 27 0 INET 28 28 0 FRAG 0 0 0
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
