这篇文章将为大家详细讲解有关linux中如何使用TLP，小编觉得挺实用的，因此分享给大家做个参考，希望大家阅读完这篇文章后可以有所收获。
TLP 是一款自由开源的高级电源管理工具，可在不进行任何配置更改的情况下延长电池寿命。
由于它的默认配置已针对电池寿命进行了优化，因此你可能只需要安装，然后就忘记它吧。
此外，它可以高度定制化，以满足你的特定要求。TLP 是一个具有自动后台任务的纯命令行工具。它不包含GUI。
TLP 适用于各种品牌的笔记本电脑。设置电池充电阈值仅适用于 IBM/Lenovo ThinkPad。
所有 TLP 设置都存储在 /etc/default/tlp 中。其默认配置提供了开箱即用的优化的节能设置。
以下 TLP 设置可用于自定义，如果需要，你可以相应地进行必要的更改。
内核笔记本电脑模式和脏缓冲区超时
处理器频率调整，包括 “turbo boost”/“turbo core”
限制***/最小的 P 状态以控制 CPU 的功耗
HWP 能源性能提示
用于多核/超线程的功率感知进程调度程序
处理器性能与节能策略（x86_energy_perf_policy）
硬盘高级电源管理级别（APM）和降速超时（按磁盘）
AHCI 链路电源管理（ALPM）与设备黑名单
PCIe 活动状态电源管理（PCIe ASPM）
PCI(e) 总线设备的运行时电源管理
Radeon 图形电源管理（KMS 和 DPM）
Wifi 省电模式
关闭驱动器托架中的光盘驱动器
音频省电模式
I/O 调度程序（按磁盘）
USB 自动暂停，支持设备黑名单/白名单（输入设备自动排除）
在系统启动和关闭时启用或禁用集成的 wifi、蓝牙或 wwan 设备
在系统启动时恢复无线电设备状态（从之前的关机时的状态）
无线电设备向导：在网络连接/断开和停靠/取消停靠时切换无线电
禁用 LAN 唤醒
挂起/休眠后恢复集成的 WWAN 和蓝牙状态
英特尔处理器的动态电源降低 —— 需要内核和 PHC-Patch 支持
电池充电阈值 —— 仅限 ThinkPad
重新校准电池 —— 仅限 ThinkPad
TLP 包在大多数发行版官方存储库中都可用，因此，使用发行版的 包管理器 来安装它。
对于 Fedora 系统，使用 DNF 命令 安装 TLP。
$ sudo dnf install tlp tlp-rdw
ThinkPad 需要一些附加软件包。
$ sudo dnf install https://download1.rpmfusion.org/free/fedora/rpmfusion-free-release-$(rpm -E %fedora).noarch.rpm$ sudo dnf install http://repo.linrunner.de/fedora/tlp/repos/releases/tlp-release.fc$(rpm -E %fedora).noarch.rpm$ sudo dnf install akmod-tp_smapi akmod-acpi_call kernel-devel
安装 smartmontool 以显示 tlp-stat 中 S.M.A.R.T. 数据。
$ sudo dnf install smartmontools
对于 Debian/Ubuntu 系统，使用 APT-GET 命令 或 APT 命令 安装 TLP。
$ sudo apt install tlp tlp-rdw
ThinkPad 需要一些附加软件包。
$ sudo apt-get install tp-smapi-dkms acpi-call-dkms
安装 smartmontool 以显示 tlp-stat 中 S.M.A.R.T. 数据。
$ sudo apt-get install smartmontools
当基于 Ubuntu 的系统的官方软件***时时，请使用以下 PPA 存储库，该存储库提供***版本。运行以下命令以使用 PPA 安装 TLP。
$ sudo apt-get install tlp tlp-rdw
对于基于 Arch Linux 的系统，使用 Pacman 命令 安装 TLP。
$ sudo pacman -S tlp tlp-rdw
ThinkPad 需要一些附加软件包。
$ pacman -S tp_smapi acpi_call
安装 smartmontool 以显示 tlp-stat 中 S.M.A.R.T. 数据。
$ sudo pacman -S smartmontools
对于基于 Arch Linux 的系统，在启动时启用 TLP 和 TLP-Sleep 服务。
$ sudo systemctl enable tlp.service$ sudo systemctl enable tlp-sleep.service
对于基于 Arch Linux 的系统，你还应该屏蔽以下服务以避免冲突，并确保 TLP 的无线电设备切换选项的正确操作。
$ sudo systemctl mask systemd-rfkill.service$ sudo systemctl mask systemd-rfkill.socket
对于 RHEL/CentOS 系统，使用 YUM 命令 安装 TLP。
$ sudo yum install tlp tlp-rdw
安装 smartmontool 以显示 tlp-stat 中 S.M.A.R.T. 数据。
$ sudo yum install smartmontools
对于 openSUSE Leap 系统，使用 Zypper 命令 安装 TLP。
$ sudo zypper install TLP
安装 smartmontool 以显示 tlp-stat 中 S.M.A.R.T. 数据。
$ sudo zypper install smartmontools
成功安装 TLP 后，使用以下命令启动服务。
$ systemctl start tlp.service
$ sudo tlp-stat -b或$ sudo tlp-stat --battery
--- TLP 1.1 -------------------------------------------- +++ Battery Status/sys/class/power_supply/BAT0/manufacturer = SMP/sys/class/power_supply/BAT0/model_name = L14M4P23/sys/class/power_supply/BAT0/cycle_count = (not supported)/sys/class/power_supply/BAT0/energy_full_design = 60000 [mWh]/sys/class/power_supply/BAT0/energy_full = 48850 [mWh]/sys/class/power_supply/BAT0/energy_now = 48850 [mWh]/sys/class/power_supply/BAT0/power_now = 0 [mW]/sys/class/power_supply/BAT0/status = Full Charge = 100.0 [%]Capacity = 81.4 [%]
$ sudo tlp-stat -d或$ sudo tlp-stat --disk
--- TLP 1.1 -------------------------------------------- +++ Storage Devices/dev/sda: Model = WDC WD10SPCX-24HWST1 Firmware = 02.01A02 APM Level = 128 Status = active/idle Scheduler = mq-deadline Runtime PM: control = on, autosuspend_delay = (not available) SMART info: 4 Start_Stop_Count = 18787 5 Reallocated_Sector_Ct = 0 9 Power_On_Hours = 606 [h] 12 Power_Cycle_Count = 1792 193 Load_Cycle_Count = 25775 194 Temperature_Celsius = 31 [°C] +++ AHCI Link Power Management (ALPM)/sys/class/scsi_host/host0/link_power_management_policy = med_power_with_dipm/sys/class/scsi_host/host1/link_power_management_policy = med_power_with_dipm/sys/class/scsi_host/host2/link_power_management_policy = med_power_with_dipm/sys/class/scsi_host/host3/link_power_management_policy = med_power_with_dipm +++ AHCI Host Controller Runtime Power Management/sys/bus/pci/devices/0000:00:17.0/ata1/power/control = on/sys/bus/pci/devices/0000:00:17.0/ata2/power/control = on/sys/bus/pci/devices/0000:00:17.0/ata3/power/control = on/sys/bus/pci/devices/0000:00:17.0/ata4/power/control = on
$ sudo tlp-stat -e或$ sudo tlp-stat --pcie
$ sudo tlp-stat -eor$ sudo tlp-stat --pcie --- TLP 1.1 -------------------------------------------- +++ Runtime Power ManagementDevice blacklist = (not configured)Driver blacklist = amdgpu nouveau nvidia radeon pcieport /sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, skl_uncore)/sys/bus/pci/devices/0000:00:01.0/power/control = auto (0x060400, PCI bridge, pcieport)/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915)/sys/bus/pci/devices/0000:00:14.0/power/control = auto (0x0c0330, USB controller, xhci_hcd) ......
$ sudo tlp-stat -g或$ sudo tlp-stat --graphics
--- TLP 1.1 -------------------------------------------- +++ Intel Graphics/sys/module/i915/parameters/enable_dc = -1 (use per-chip default)/sys/module/i915/parameters/enable_fbc = 1 (enabled)/sys/module/i915/parameters/enable_psr = 0 (disabled)/sys/module/i915/parameters/modeset = -1 (use per-chip default)
$ sudo tlp-stat -p或$ sudo tlp-stat --processor
--- TLP 1.1 -------------------------------------------- +++ ProcessorCPU model = Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = intel_pstate/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = powersave/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = performance powersave/sys/devices/system/cpu/cpu0/cpufreq/scaling_min_freq = 800000 [kHz]/sys/devices/system/cpu/cpu0/cpufreq/scaling_max_freq = 3500000 [kHz]/sys/devices/system/cpu/cpu0/cpufreq/energy_performance_preference = balance_power/sys/devices/system/cpu/cpu0/cpufreq/energy_performance_available_preferences = default performance balance_performance balance_power power ...... /sys/devices/system/cpu/intel_pstate/min_perf_pct = 22 [%]/sys/devices/system/cpu/intel_pstate/max_perf_pct = 100 [%]/sys/devices/system/cpu/intel_pstate/no_turbo = 0/sys/devices/system/cpu/intel_pstate/turbo_pct = 33 [%]/sys/devices/system/cpu/intel_pstate/num_pstates = 28 x86_energy_perf_policy: program not installed. /sys/module/workqueue/parameters/power_efficient = Y/proc/sys/kernel/nmi_watchdog = 0 +++ UndervoltingPHC kernel not available.
$ sudo tlp-stat -s或$ sudo tlp-stat --system
--- TLP 1.1 -------------------------------------------- +++ System InfoSystem = LENOVO Lenovo ideapad Y700-15ISK 80NVBIOS = CDCN35WWRelease = "Manjaro Linux"Kernel = 4.19.6-1-MANJARO #1 SMP PREEMPT Sat Dec 1 12:21:26 UTC 2018 x86_64/proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=69d9dd18-36be-4631-9ebb-78f05fe3217f rw quiet resume=UUID=a2092b92-af29-4760-8e68-7a201922573bInit system = systemd Boot mode = BIOS (CSM, Legacy) +++ TLP StatusState = enabledLast run = 11:04:00 IST, 596 sec(s) agoMode = batteryPower source = battery
$ sudo tlp-stat -t或$ sudo tlp-stat --temp
--- TLP 1.1 -------------------------------------------- +++ TemperaturesCPU temp = 36 [°C]Fan speed = (not available)
$ sudo tlp-stat -u或$ sudo tlp-stat --usb
--- TLP 1.1 -------------------------------------------- +++ USBAutosuspend = disabledDevice whitelist = (not configured)Device blacklist = (not configured)Bluetooth blacklist = disabledPhone blacklist = disabledWWAN blacklist = enabled Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub)Bus 001 Device 003 ID 174f:14e8 control = auto, autosuspend_delay_ms = 2000 -- Syntek (uvcvideo) ......
$ sudo tlp-stat -w或$ sudo tlp-stat --warn
--- TLP 1.1 -------------------------------------------- No warnings detected.
$ sudo tlp-stat
--- TLP 1.1 -------------------------------------------- +++ Configured Settings: /etc/default/tlpTLP_ENABLE=1TLP_DEFAULT_MODE=ACTLP_PERSISTENT_DEFAULT=0DISK_IDLE_SECS_ON_AC=0DISK_IDLE_SECS_ON_BAT=2MAX_LOST_WORK_SECS_ON_AC=15MAX_LOST_WORK_SECS_ON_BAT=60 ...... +++ System InfoSystem = LENOVO Lenovo ideapad Y700-15ISK 80NVBIOS = CDCN35WWRelease = "Manjaro Linux"Kernel = 4.19.6-1-MANJARO #1 SMP PREEMPT Sat Dec 1 12:21:26 UTC 2018 x86_64/proc/cmdline = BOOT_IMAGE=/boot/vmlinuz-4.19-x86_64 root=UUID=69d9dd18-36be-4631-9ebb-78f05fe3217f rw quiet resume=UUID=a2092b92-af29-4760-8e68-7a201922573bInit system = systemdBoot mode = BIOS (CSM, Legacy) +++ TLP StatusState = enabledLast run = 11:04:00 IST, 684 sec(s) agoMode = batteryPower source = battery +++ ProcessorCPU model = Intel(R) Core(TM) i7-6700HQ CPU @ 2.60GHz /sys/devices/system/cpu/cpu0/cpufreq/scaling_driver = intel_pstate/sys/devices/system/cpu/cpu0/cpufreq/scaling_governor = powersave/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_governors = performance powersave ...... /sys/devices/system/cpu/intel_pstate/min_perf_pct = 22 [%]/sys/devices/system/cpu/intel_pstate/max_perf_pct = 100 [%]/sys/devices/system/cpu/intel_pstate/no_turbo = 0/sys/devices/system/cpu/intel_pstate/turbo_pct = 33 [%]/sys/devices/system/cpu/intel_pstate/num_pstates = 28 x86_energy_perf_policy: program not installed. /sys/module/workqueue/parameters/power_efficient = Y/proc/sys/kernel/nmi_watchdog = 0 +++ UndervoltingPHC kernel not available. +++ TemperaturesCPU temp = 42 [°C]Fan speed = (not available) +++ File System/proc/sys/vm/laptop_mode = 2/proc/sys/vm/dirty_writeback_centisecs = 6000/proc/sys/vm/dirty_expire_centisecs = 6000/proc/sys/vm/dirty_ratio = 20/proc/sys/vm/dirty_background_ratio = 10 +++ Storage Devices/dev/sda: Model = WDC WD10SPCX-24HWST1 Firmware = 02.01A02 APM Level = 128 Status = active/idle Scheduler = mq-deadline Runtime PM: control = on, autosuspend_delay = (not available) SMART info: 4 Start_Stop_Count = 18787 5 Reallocated_Sector_Ct = 0 9 Power_On_Hours = 606 [h] 12 Power_Cycle_Count = 1792 193 Load_Cycle_Count = 25777 194 Temperature_Celsius = 31 [°C] +++ AHCI Link Power Management (ALPM)/sys/class/scsi_host/host0/link_power_management_policy = med_power_with_dipm/sys/class/scsi_host/host1/link_power_management_policy = med_power_with_dipm/sys/class/scsi_host/host2/link_power_management_policy = med_power_with_dipm/sys/class/scsi_host/host3/link_power_management_policy = med_power_with_dipm +++ AHCI Host Controller Runtime Power Management/sys/bus/pci/devices/0000:00:17.0/ata1/power/control = on/sys/bus/pci/devices/0000:00:17.0/ata2/power/control = on/sys/bus/pci/devices/0000:00:17.0/ata3/power/control = on/sys/bus/pci/devices/0000:00:17.0/ata4/power/control = on +++ PCIe Active State Power Management/sys/module/pcie_aspm/parameters/policy = powersave +++ Intel Graphics/sys/module/i915/parameters/enable_dc = -1 (use per-chip default)/sys/module/i915/parameters/enable_fbc = 1 (enabled)/sys/module/i915/parameters/enable_psr = 0 (disabled)/sys/module/i915/parameters/modeset = -1 (use per-chip default) +++ Wirelessbluetooth = onwifi = onwwan = none (no device) hci0(btusb) : bluetooth, not connectedwlp8s0(iwlwifi) : wifi, connected, power management = on +++ Audio/sys/module/snd_hda_intel/parameters/power_save = 1/sys/module/snd_hda_intel/parameters/power_save_controller = Y +++ Runtime Power ManagementDevice blacklist = (not configured)Driver blacklist = amdgpu nouveau nvidia radeon pcieport /sys/bus/pci/devices/0000:00:00.0/power/control = auto (0x060000, Host bridge, skl_uncore)/sys/bus/pci/devices/0000:00:01.0/power/control = auto (0x060400, PCI bridge, pcieport)/sys/bus/pci/devices/0000:00:02.0/power/control = auto (0x030000, VGA compatible controller, i915) ...... +++ USBAutosuspend = disabledDevice whitelist = (not configured)Device blacklist = (not configured)Bluetooth blacklist = disabledPhone blacklist = disabledWWAN blacklist = enabled Bus 002 Device 001 ID 1d6b:0003 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 3.0 root hub (hub)Bus 001 Device 003 ID 174f:14e8 control = auto, autosuspend_delay_ms = 2000 -- Syntek (uvcvideo)Bus 001 Device 002 ID 17ef:6053 control = on, autosuspend_delay_ms = 2000 -- Lenovo (usbhid)Bus 001 Device 004 ID 8087:0a2b control = auto, autosuspend_delay_ms = 2000 -- Intel Corp. (btusb)Bus 001 Device 001 ID 1d6b:0002 control = auto, autosuspend_delay_ms = 0 -- Linux Foundation 2.0 root hub (hub) +++ Battery Status/sys/class/power_supply/BAT0/manufacturer = SMP/sys/class/power_supply/BAT0/model_name = L14M4P23/sys/class/power_supply/BAT0/cycle_count = (not supported)/sys/class/power_supply/BAT0/energy_full_design = 60000 [mWh]/sys/class/power_supply/BAT0/energy_full = 51690 [mWh]/sys/class/power_supply/BAT0/energy_now = 50140 [mWh]/sys/class/power_supply/BAT0/power_now = 12185 [mW]/sys/class/power_supply/BAT0/status = Discharging Charge = 97.0 [%]Capacity = 86.2 [%]
关于“linux中如何使用TLP”这篇文章就分享到这里了，希望以上内容可以对大家有一定的帮助，使各位可以学到更多知识，如果觉得文章不错，请把它分享出去让更多的人看到。
免责声明：本站发布的内容（图片、视频和文字）以原创、转载和分享为主，文章观点不代表本网站立场，如果涉及侵权请联系站长邮箱：is@yisu.com进行举报，并提供相关证据，一经查实，将立刻删除涉嫌侵权内容。
