如何将micropython升级到v1.15

这篇文章将为大家详细讲解有关如何将micropython升级到v1.15，文章内容质量较高，因此小编分享给大家做个参考，希望大家阅读完这篇文章后对相关知识有一定的了解。

MicroPython在这个版本中增加了对使用CMake作为构建系统的通用支持。RP2移植被合并以使用新的CMake文件，esp32和zephyr移植已切换为纯CMake项目。这三个移植都有围绕CMake构建的SDK，这一更改使它们更易于维护和使用。

作为这项工作的一部分，基于CMake的移植现在支持用户C模块。用户C模块的作者应该同时提供.mk和.cmake配置文件（遵循文档和示例）。

修复了多精度整数库中的一个错误，即长除法例程中的算术溢出。在此修复之前，某些整数除法将花费大量时间并产生不正确的结果。有关详细信息，请参见提交0a59938。此外，还修复了正则表达式，在编译表达式时检查和报告字节溢出错误。参见172fb52。

在uasyncio库中，添加了一个新的MicroPython扩展ThreadSafeFlag，它可以从asyncio事件循环外部进行设置，例如从其他线程、irq或调度程序上下文。它允许像irq这样的抢占式代码中向asyncio任务发送信号，这些任务本质上是协作的（非抢占式的）。asyncio.current_task() 也已添加，语义与CPython相同。

如上所述，esp32移植已切换到基于CMake的完整项目，传统的make功能已被删除（尽管仍保留一个简单的helper Makefile，以使顶级构建/部署命令与其他移植保持一致）。因为切换到 CMake，network.LAN 支持已被删除，并将在以后重新添加（如果需要LAN，请使用以前的版本）。esp32模块增加了对非易失性存储的基本支持。此外，还初步支持 ESP32-S2 和 USB，并定义了一个通用的 S2板。

在mimxrt和samd移植上，USB-CDC-TX处理已修复，因此现在可以可靠地工作。

RP2移植启用了更多的Python核心特性，同时还启用了ubinascii.crc32()、uos.VfsFat和machine.Signal类，以及uerrno模块。uos.urandom() 已添加，并且machine.freq() 现在可以更改CPU时钟频率。machine.UART 类现在支持timeout/timeout_char、反转的TX/RX信号和可配置缓冲区大小的TX/RX。对于PIO，StateMachine添加了restart(), rx_fifo() 和 tx_fifo()助手函数，并支持fifo连接。现在支持用户C模块（通过CMake）和构建不同的板配置（默认仍然是PICO板）。提高了USB的可靠性。

对于stm32移植，现在有更多的板配置选项，例如USBD VID/PID和模块的fine-grained选择。UART类现在支持L0、L4、H7和WB MCU上的LPUART。WB MCU对访问BLE ACL 自由缓冲区列表的竞争条件有一个修复，解决低级BLE bug。

zephyr移植已经更新为使用 Zephyr v2.5.0，并使用 CMake 构建MicroPython。

下面是从git提交历史生成的更改的详细列表，并将其组织为多个部分。

主要组件

all:

• rename BYTES_PER_WORD to MP_BYTES_PER_OBJ_WORD

• add .git-blame-ignore-revs for fixing up git blame output

py core:

• gc: don't include mpconfig.h and misc.h in gc.h

• remove BITS_PER_WORD definition

• rename BITS_PER_BYTE to MP_BITS_PER_BYTE

• rename WORD_MSBIT_HIGH to MP_OBJ_WORD_MSBIT_HIGH

• gc: change include of stdint.h to stddef.h

• mpz: fix overflow of borrow in mpn_div

• add core cmake rule files

• expand lists in core cmake custom commands

• mkrules.cmake: rename QSTR_DEFS variables to QSTRDEFS

• mkrules.cmake: add MICROPY_QSTRDEFS_PORT to qstr build process

• nlr: implement NLR for AArch74

• nlrx64: fix typo in comment

• vm: for tracing use mp_printf, and print state when thread enabled

• rename remaining object types to be of the form mp_type_xxx

• py.cmake: move qstr helper code to micropy_gather_target_properties

• py.cmake: introduce MICROPY_INC_CORE as a list with core includes

• profile: resolve name collision with STATIC unset

• runtime: make sys.modules preallocate to a configurable size

extmod:

• vfs_posix_file: allow closing an already closed file

• btstack: add HCI trace debugging option in btstack_hci_uart

• btstack: add stub functions for passkey, l2cap bindings

• btstack: enable SYNC_EVENTS, PAIRING_BONDING by default

• uasyncio: add asyncio.current_task()

• add core cmake rule files

• nimble: ensure handle is set on read error

• moduselect: fix unsigned/signed comparison for timeout!=-1

• uasyncio: add ThreadSafeFlag

• nimble/hal/hal_uart: fix HCI_TRACE format specifiers

• modbluetooth: allow NimBLE to use Zephyr static address

• modussl: fix ussl read/recv/send/write errors when non-blocking

• btstack: use MICROPY_HW_BLE_UART_BAUDRATE for first UART init

• modbluetooth: separate enabling of "client" from "central"

• extmod.cmake: add modonewire.c to MICROPY_SOURCE_EXTMOD list

• modbluetooth: free temp arrays in gatts register services

• re1.5: check and report byte overflow errors in _compilecode

• extmod.cmake: add support to build btree module with CMake

lib:

• tinyusb: update to version 0.8.0

• mbedtls: switch to currently latest commit of LTS branch v2.16

• utils/gchelper_generic: implement AArch74 support

• pico-sdk: update to latest version 1.1.0

drivers: no changes specific to this component/port

mpy-cross: no changes specific to this component/port

支撑组件

docs:

• library/uasyncio.rst: add docs for ThreadSafeFlag

• develop/cmodules.rst: document C-modules and micropython.cmake

• develop: improve user C modules to properly describe how to build

examples:

• usercmodule: add micropython.cmake to the C and CPP examples

• usercmodules: simplify user C module enabling

• embedding: fix example so it compiles again

tests:

• extmod/vfs_posix.py: add more tests for VfsPosix class

• extmod: add test for ThreadSafeFlag

• multi_bluetooth: add basic performance tests

• rename run-tests to run-tests.py for consistency

• run-tests.py: reformat with Black

• multi_bluetooth: skip tests when BLE features are unsupported

• extmod/vfs_fat_fileio2.py: close test file at end of test

• run-tests.py: provide more info if script run via pyboard crashes

• feature_check: check for lack of pass result rather than failure

• net_inet: add 'Strict-Transport-Security' to exp file

tools:

• add filesystem action examples to pyboard.py help

• ci.sh: change esp32 CI to work with idf.py and IDF v4.0.2

• makemanifest.py: allow passing option args to include()

• ci.sh: update zephyr docker image to v0.11.13

• verifygitlog.py: show required format regexp in error message

• pydfu.py: support DFU files with elements of zero size

• ci.sh: add CI for CMake USER_C_MODULE support

• ci.sh: build user C modules for esp32

• metrics.py: fix esp32 output filename due to move to CMake

• ci.sh: build esp32 using IDF v4.0.2 and v4.3

移植

all ports:

• remove def of MP_PLAT_PRINT_STRN if it's the same as the default

• update to build with new tinyusb

bare-arm port:

• clean up the code, make it run on an F405, and add a README

cc3200 port: no changes specific to this component/port

esp8266 port:

• modules: fix fs_corrupted() to use start_sec not START_SEC

esp32 port:

• add support to build using IDF with cmake

• esp32_rmt: don't do unnecessary check for unsigned less than zero

• add explicit initialisers to silence compiler warnings

• remove traditional "make" capability

• boards: remove old IDF v3 sdkconfig values

• boards: enable BLE on all boards

• README: update based on new IDF v4 cmake build process

• add support to build with ESP-IDF v4.1.1

• add support to build with ESP-IDF v4.2

• remove obsolete IDF v3 code wrapped in MICROPY_ESP_IDF_4

• modsocket: remove unix socket error code translation

• set MICROPY_USE_INTERNAL_ERRNO=0 to use toolchain's errno.h

• boards: enable size optimisation for builds

• add support to build with ESP-IDF v4.3 pre-release

• add basic support for Non-Volatile-Storage in esp32 module

• make machine.soft_reset() work in main.py and reset_cause()

• define MICROPY_QSTRDEFS_PORT to include special qstrs

• Makefile: specify port and baud on erase_flash command

• machine_hw_spi: use default pins when making SPI if none given

• restore USER_C_MODULE support with new CMake build system

• fix multiple definition errors with mp_hal_stdout_tx functions

• enable btree module

• modsocket: correctly handle poll/read of unconnected TCP socket

• add initial support for ESP32S2 SoCs

• add support for USB with CDC ACM

• boards: add GENERIC_S2 board definition

• machine_pin: use rtc_gpio_deinit instead of gpio_reset_pin

javascript port: no changes specific to this component/port

mimxrt port:

• fix USB CDC handling so it works reliably

• boards: add MIMXRT1050_EVK board, based on MIMXRT1060_EVK

• enable CPYTHON_COMPAT, PY_ASYNC_AWAIT, PY_ATTRTUPLE options

minimal port: no changes specific to this component/port

nrf port:

• drivers/usb: add USBD_IRQHandler which calls tud_int_handler

pic16bit port: no changes specific to this component/port

powerpc port: no changes specific to this component/port

qemu-arm port: no changes specific to this component/port

rp2 port:

• machine_adc: only initialise the ADC periph if not already enabled

• micropy_rules.cmake: fix makemoduledefs vpath to work with abs path

• use local tinyusb instead of the one in pico-sdk

• enable MICROPY_PY_UBINASCII_CRC32 to get ubinascii.crc32()

• enable VfsFat class for FAT filesystem support

• machine_uart: add timeout/timeout_char to read and write

• machine_uart: add support for inverted TX and RX lines

• rp2_pio: allow more than 8 consecutive pins for PIO out/set/sideset

• rp2_pio: fix sm.get(buf) to not wait after getting last item

• modmachine: allow changing CPU clock frequency

• modmachine: re-init UART for REPL on frequency change

• rp2_flash: prevent MICROPY_HW_FLASH_STORAGE_BASE being set negative

• enable uerrno module

• enabled more core Python features

• modmachine: enable machine.Signal class

• use core-provided cmake fragments instead of custom ones

• mpthreadport.h: cast core_state to _mp_state_thread_t

• add support for USER_C_MODULES to CMake build system

• don't advertise remote wakeup for USB serial

• CMakeLists.txt: enable USB enumeration fix

• import uarray instead of array in rp2 module

• rp2_pio: validate state machine frequency in constructor

• moduos: implement uos.urandom()

• rp2_pio: add StateMachine restart,rx_fifo,tx_fifo helper functions

• machine_uart: add buffered transfer of data with rxbuf/txbuf kwargs

• add support for building different board configurations

• rp2_pio: add fifo_join support for PIO

samd port:

• mphalport: fix USB CDC tx handling to work reliably

stm32 port:

• uart: add uart_set_baudrate function

• mpbthciport: only init the uart once, then use uart_set_baudrate

• mboot: add unpack-dfu command to mboot_pack_dfu.py tool

• usb: allow a board to configure USBD_VID and all PIDs

• make pyb, uos, utime, machine and onewire modules configurable

• boards: disable onewire module on boards with small flash

• mpbthciport: fix initial baudrate to use provided value

• mpbthciport: use mp_printf instead of printf for error message

• mpbtstackport: allow chipset and secondary baudrate to be set

• mboot: after sig verify, only write firmware-head if latter valid

• uart: add support for LPUART1 on L0, L4, H7 and WB MCUs

• boards/NUCLEO_WB55: enable LPUART1 on PA2/PA3

• enable MICROPY_PY_UBINASCII_CRC32 to get ubinascii.crc32()

• rfcore: allow BLE settings to be changed by a board

• storage: prevent attempts to read/write invalid block addresses

• make-stmconst.py: allow "" chars when parsing source comments

• main: fix passing state.reset_mode to init_flash_fs

• powerctrl: save and restore EWUP state when configuring standby

• spi: fix baudrate calculation for H7 series

• boardctrl: add MICROPY_BOARD_STARTUP hook

• Makefile: fix C++ linker flags when toolchain has spaces in path

• Makefile: allow QSTR_DEFS,QSTR_GLOBAL_DEPENDENCIES to be extended

• include .ARM section in firmware for C++ exception handling

• powerctrl: allow a board to configure AHB and APB clock dividers

• powerctrl: support using PLLI2C on STM32F413 as USB clock source

• boards/pllvalues.py: relax PLLQ constraints on STM32F413 MCUs

• mpconfigport.h: add support for a board to specify root pointers

• boardctrl: give boards control over execution of boot.py,main.py

• boards/NUCLEO_L476RG: add 5 remaining UARTs

• rfcore: fix race condition with C2 accessing free buffer list

• rfcore: intercept addr-resolution HCI cmd to work around BLE bug

• boards: split UARTx_RTS_DE into UARTx_RTS/UARTx_DE in pin defs

• uart: use LL_USART_GetBaudRate to compute baudrate

• sdram: make MICROPY_HW_FMC_BA1,MICROPY_HW_FMC_A11 optional pins

teensy port: no changes specific to this component/port

unix port:

• mpbtstackport_common: implement mp_bluetooth_hci_active

• moduselect: don't allow both posix and non-posix configurations

• improve command line argument processing

• main: make static variable that's potentially clobbered by longjmp

windows port: no changes specific to this component/port

zephyr port:

• update to zephyr v2.5.0

• disable frozen source modules

• remove unused build files

• build MicroPython as a cmake target

• boards: add support for the nucleo_h743zi board

• modusocket: fix parameter in calls to net_context_get_XXX()

关于如何将micropython升级到v1.15就分享到这里了，希望以上内容可以对大家有一定的帮助，可以学到更多知识。如果觉得文章不错，可以把它分享出去让更多的人看到。