这篇文章主要为大家展示了“C++如何实现算法两个数字相加”,内容简而易懂,条理清晰,希望能够帮助大家解决疑惑,下面让小编带领大家一起研究并学习一下“C++如何实现算法两个数字相加”这篇文章吧。
You have two numbers represented by a linked list, where each node contains a single digit. The digits are stored in reverse order, such that the 1's digit is at the head of the list. Write a function that adds the two numbers and returns the sum as a linked list.
EXAMPLE
Input: (7-> 1 -> 6) + (5 -> 9 -> 2).That is, 617 + 295.
Output: 2 -> 1 -> 9.That is, 912.
FOLLOW UP
Suppose the digits are stored in forward order. Repeat the above problem.
EXAMPLE
Input: (6 -> 1 -> 7) + (2 -> 9 -> 5).That is, 617 + 295.
Output: 9 -> 1 -> 2.That is, 912.
LeetCode上的原题,请参考另一篇文档Add Two Numbers 两个数字相加。
跟那道LeetCode有所不同的是,这道题还有个Follow Up,把链表存的数字方向变了,原来是表头存最低位,现在是表头存最高位。既然是翻转了链表,那么一种直接的解法是把两个输入链表都各自翻转一下,然后用之前的方法相加完成,再把得到的结果翻转一次,就是结果了,翻转链表的方法可以参考另一篇文档Reverse Linked List 倒置链表。代码如下:
解法一:
// Follow up class Solution { public: ListNode *addTwoNumbers(ListNode *l1, ListNode *l2) { ListNode *dummy = new ListNode(-1); ListNode *cur = dummy; int carry = 0; l1 = reverseList(l1); l2 = reverseList(l2); while (l1 || l2) { int n1 = l1 ? l1->val : 0; int n2 = l2 ? l2->val : 0; int sum = n1 + n2 + carry; carry = sum / 10; cur->next = new ListNode(sum % 10); cur = cur->next; if (l1) l1 = l1->next; if (l2) l2 = l2->next; } if (carry) cur->next = new ListNode(1); return reverseList(dummy->next); } ListNode *reverseList(ListNode *head) { if (!head) return head; ListNode *dummy = new ListNode(-1); dummy->next = head; ListNode *cur = head; while (cur->next) { ListNode *tmp = cur->next; cur->next = tmp->next; tmp->next = dummy->next; dummy->next = tmp; } return dummy->next; } };
如果我们不采用翻转链表的方法该怎么做呢,这就比较复杂了。首先我们要县分别计算出两个链表的长度,然后给稍短一点的链表前面补0,补到和另一个链表相同的长度。由于要从低位开始相加,而低位是链表的末尾,所以我们采用递归来处理,先遍历到链表的末尾,然后从后面相加,进位标示符carry用的是引用,这样保证了再递归回溯时值可以正确传递,每次计算的节点后面接上上一次回溯的节点,直到回到首节点完成递归。最后还是处理最高位的进位问题。代码如下:
解法二:
// Follow up class Solution { public: ListNode *addTwoNumbers(ListNode *l1, ListNode *l2) { int n1 = 0, n2 = 0, carry = 0;; n1 = getLength(l1); n2 = getLength(l2); if (n1 > n2) l2 = padList(l2, n1 - n2); if (n2 > n1) l1 = padList(l1, n2 - n1); ListNode *res = addTwoNumbersDFS(l1, l2, carry); if (carry == 1) { ListNode *tmp = new ListNode(1); tmp->next = res; res = tmp; } return res; } ListNode *addTwoNumbersDFS(ListNode *l1, ListNode *l2, int &carry) { if (!l1 && !l2) return NULL; ListNode *list = addTwoNumbersDFS(l1->next, l2->next, carry); int sum = l1->val + l2->val + carry; ListNode *res = new ListNode(sum % 10); res->next = list; carry = sum / 10; return res; } ListNode *padList(ListNode *list, int len) { ListNode *dummy = new ListNode(-1); ListNode *cur = dummy; for (int i = 0; i < len; ++i) { cur->next = new ListNode(0); cur = cur->next; } cur->next = list; return dummy->next; } int getLength(ListNode *list) { ListNode *cur = list; int res = 0; while (cur) { ++res; cur = cur->next; } return res; } };
以上是“C++如何实现算法两个数字相加”这篇文章的所有内容,感谢各位的阅读!相信大家都有了一定的了解,希望分享的内容对大家有所帮助,如果还想学习更多知识,欢迎关注亿速云行业资讯频道!
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。