就是策略路由
1) 创建routing-instance(SP1,SP2),instance-type为fowarding
edit routing-instance [SP1] instance-type forwading
set routing-options static route 0/0 nex-hop 202.100.1.1
edit routing-instance [SP2] instance-type forwading
set routing-options static route 0/0 nex-hop 202.100.2.1
2)创建firewall filter
edit friewall filter [Inside1] term [1]
set from source-address 10.1.1.0/24
set then routing-instance SP1
set term [Default-Permit-All] then accept
set firewall filter [Inside1] term [1] from source-address 10.1.1.0/24
set firewall filter [Inside1] term [1] from source-port xxxx
set firewall filter [Inside1] term [1] destination-address x.x.x.x/x
set firewall filter [Inside1] term [1] destination-port xxxx
set firewall filter [Inside1] term [1] then routing-instance SP1
set firewall filter [Inside1] term [Default-Permit] then accept
edit firewall filter [Inside2] term [2]
set from source-address
set then routing-instance SP2
set term [Default-Permit-All] then accept
3)接口 调用filter
set interface ge-0/0/2.0 family inet filter input Inside1
set interfaes ge-0/0/3.0 family inet filter input Inside2
4)合并路由表
run show route //查看全局路由表中,是没有前面定义的routing-instance中的路由的
show routing-instances
edit routing-options
set interface-routes rib-group inet [Policy-Routing]
edit rib-groups [Policy-Routing]
set import-rib [inet.0 SP1.inet.0 SP2.inet.0]
run show route //查看合并后的路由表
5)创建Zone间策略:Security Policis(放行流量Inside1->Outside;Inside2->Outside)
set security policies from-zone Inside1 to-zone Outside policy Default-Permit-All
set match source-address any
set match destination-address any
set match application any
set then permit
set security policies from-zone Inside2 to-zone Outside policy Default-Permit-All
set match sourc-address any
set match destination-address any
set match application-address any
set then permit
#show security policies
#run show security flow session
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。