温馨提示×

温馨提示×

您好,登录后才能下订单哦!

密码登录×
登录注册×
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》

Juniper防火墙平台支持NSRP所需要的最低Screen

发布时间:2020-03-10 21:26:59 来源:网络 阅读:188 作者:msft 栏目:安全技术

Juniper防火墙平台支持NSRP所需要的最低ScreenOS

Platform Active/Passive Active/Active

ISG Series 5.0.0 or above 5.0.0 or above

NS5000 Series 5.0.0 or above 5.0.0 or above

SSG550/550M 5.1.0 or above 5.1.0 or above

SSG520/520M 5.1.0 or above 6.0.0 or above

SSG300 Series 5.4.0 or above 5.4.0 or above

SSG 140 5.4.0 or above 6.0.0 or above

SSG5 & SSG20 5.4.0 or above* 6.0.0 or above*

NS500 5.1.0 or above 5.1.0 or above

NS200 Series 5.1.0 or above 5.1.0 or above

NS50 5.1.0 or above Not Supported

NS25 5.1.0 or above** Not Supported

NS5gt 5.1.0 or above*** Not Supported

NSRP-Lite is a limited functionality version of NSRP and is supported on the following platforms:

NetScreen-5XT

NetScreen-5GT

NetScreen-25

NetScreen-50 (supports both NSRP-Lite and NSRP, depending on license)

Unlike the full version of NSRP, NSRP-Lite only synchronizes configuration information. It does not support RTO or session synchronization. This means should a device failover occur all user sessions and ××× connections must be re-established. While most applications have built-in mechanisms to re-establish sessions, it is necessary to enable ××× Monitoring on the ××× Tunnels on NSRP-Lite devices to ensure the tunnels are properly re-established in the event of a failover.


向AI问一下细节

免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。

AI