温馨提示×

温馨提示×

您好,登录后才能下订单哦!

密码登录×
登录注册×
其他方式登录
点击 登录注册 即表示同意《亿速云用户服务条款》

纯LACP

发布时间:2020-07-31 15:31:39 来源:网络 阅读:997 作者:流云飞逝 栏目:安全技术

 Configuring Aggregated Ethernet Device with LAG and LACP (CLI)



1.Configure the number of ae/LAG interface that you need to create.

[edit]

user@host# set chassis aggregated-devices ethernet device-count 5


2. Add port to ae/LAG

[edit]

user@host# set interfaces ge-2/0/1 gigether-options 802.3ad ae0

user@host# set interfaces ge-2/0/2 gigether-options 802.3ad ae0


3. Configure LACP for ae/LAG

[edit]

user@host# set interfaces ae0 aggregated-ether-options lacp active


4. Configure family Ethernet-switching for ae/LAG

[edit]

user@host# set interfaces ae0 unit 0 family ethernet-switching


5. Configure VLAN

[edit]


user@host# set vlans vlan20 vlan-id 20


6. Add ae to VLAN

[edit]

user@host# set vlans vlan20 interface ae0


7 . Check the configuration by entering show vlans and show interfaces commands

user@host# show vlans

vlan20 {

vlan-id 20;

interface {

ae0.0;

}

}

user@host# show interfaces

ge-2/0/1 {

gigether-options {

802.3ad ae0;

}

}

ge-2/0/2 {

gigether-options {

802.3ad ae0;

}

}

ae0 {

aggregated-ether-options {

lacp {

active;

}

}

unit 0 {

family ethernet-switching;

}

}


8. If you are done configuring the device, commit the configuration.

[edit]

user@host# commit



Verification


user@host# run show lacp interfaces

Aggregated interface: ae0

LACP state: Role Exp Def Dist Col Syn Aggr Timeout Activity

ge-2/0/1 Actor No No Yes Yes Yes Yes Fast Active

ge-2/0/1 Partner No No Yes Yes Yes Yes Fast Active

ge-2/0/2 Actor No No Yes Yes Yes Yes Fast Active

ge-2/0/2 Partner No No Yes Yes Yes Yes Fast Active

LACP protocol: Receive State Transmit State Mux State


user@host# run show vlans

Name Tag Interfaces

default 1 None

vlan20 20 ae0.0

From the configuration mode, enter show interfaces (interface name) command to view

the status of ge-2/0/1 and ge-2/0/2 interfaces.


user@host# run show interfaces ge-2/0/1 terse

Interface Admin Link Proto Local Remote

ge-2/0/1 up up

ge-2/0/1.0 up up aenet --> ae0.0

user@host# run show interfaces ge-2/0/2 terse

Interface Admin Link Proto Local Remote

ge-2/0/2 up up

ge-2/0/2.0 up up aenet --> ae0.0


run show inter ter | match ae


向AI问一下细节

免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。

AI