交换机vlan路由实验——单臂路由方式
网络拓扑图:
路由器上的配置:
<R>system-view
[R]interface Ethernet 0/0/0.1
[R-Ethernet0/0/0.1]dot1q termination vid 10
[R-Ethernet0/0/0.1]ip address 192.168.1.1 255.255.255.0
[R-Ethernet0/0/0.1]q
[R]interface Ethernet 0/0/0.2
[R-Ethernet0/0/0.2]dot1q termination vid 20
[R-Ethernet0/0/0.2]ip address 192.168.2.1 255.255.255.0
[R-Ethernet0/0/0.2]q
[R]display ip interface brief
Interface IP Address/Mask Physical Protocol
Ethernet0/0/0 unassigned up down
Ethernet0/0/0.1 192.168.1.1/24 up up
Ethernet0/0/0.2 192.168.2.1/24 up up
交换机上的配置:
[S]interface GigabitEthernet 0/0/1
[S-GigabitEthernet0/0/1] port link-type trunk
[S-GigabitEthernet0/0/1] port trunk allow-pass vlan 10 20
[S-GigabitEthernet0/0/1]q
[S]interface GigabitEthernet0/0/2
[S-GigabitEthernet0/0/2] port link-type access
[S-GigabitEthernet0/0/2] port default vlan 10
[S-GigabitEthernet0/0/2]q
[S]interface GigabitEthernet 0/0/3
[S-GigabitEthernet0/0/3]port link-type access
[S-GigabitEthernet0/0/3]port default vlan 20
[S-GigabitEthernet0/0/3]q
实验结果验证:PC1和PC2之间可以ping通
免责声明:本站发布的内容(图片、视频和文字)以原创、转载和分享为主,文章观点不代表本网站立场,如果涉及侵权请联系站长邮箱:is@yisu.com进行举报,并提供相关证据,一经查实,将立刻删除涉嫌侵权内容。